Subj : newest guns and projects To : ALL From : JIMMY ANDERSON Date : Sat May 30 2020 04:02 am Howdy! If anyone is interested in talking guns :-) Recently I bought a Ruger Wrangler. While I was at the store, my wife saw a Ruger AR-556 pistol that she liked. That was a Saturday. After we got home she kept talking about it. Sunday, she still talked about it, but we had church and then Monday we had some stuff to do, so Tuesday we made the drive back to the store and brought it home. :-) About a month goes by and our youngest son brought his new gun out to shoot - a Keltec Sub 2000 9mm Glock version. She shot it and looked at me and smiled, so guess what was the next thing I started hunting down. LOL So we started calling around and hunting one down - hard to find! Called a store in Dickson last Saturday and they had one, but it was almost closing time and it was black - she thought she wanted a Bronze one, but then as the weekend went on she decided she'd rather have a black one than have to wait - LOL - she's not very patient. :-) Plus she looked online at the black versus the bronze and other colors and decided she liked the look of the black one anyway, so... They were closed Monday for Memorial Day, so Tuesday FIRST THING I called and the owner answered. "No, no SUB 2000 right now - haven't had on in a while" so he took my number. Five minutes later he called back. Turns out they DID have one in the system - that's what the guy was going by Saturday - but it wasn't on the shelf. They found it in the back, still in the box. Been there since March and they agreed to hold it for us. Wife took her mom to the doctor, then we made the two hour ONE WAY drive to get it. :-) Next day, she shot it and likes it, but the charging handle is WAY heavy and hard for her to pull! I started doing some looking around online and found that MCARBO makes a TWO FINGER one, as well as a trigger kit and other things. I ordred the two finger charging pull for her and did some other looking around on their site... We both have S&W M&P Shield .40's for our carry guns. MCARBO makes a 'trigger kit' for the SUB 2000, but it's over $100. I'm sure it's worth it, but my wife is not concerned about the trigger pull on the rifle, and that's a lot to spend on a brand new gun that's not even broken in but the trigger kit for the Shield is only $20! They have a polishing kit for less than $15 that has three Dremel polishing bits, their 'compound,' a pair of gloves and a microfiber cloth. I need to finish polishing my Browning Belgium SA-22's feed ramp, but I'll get into that below... Anyway, the trigger kit for the Shield comes with a little silicon carbide sandpaper to help clean stuff, and I bought a 10 pack of those for .99. When it's all said and done I will have new springs for the trigger and the material and such to polish all the internal parts! The places where the springs touch and the trigger transfer bar, the sear, etc. Supposedly polishing it all will help get and leftover burrs, etc. from the machining process and help things move smoother! There are a few reasons I decided to do this... First, it can't hurt. :-) I feel like it's similar to blueprinting an engine. That is, taking it apart and making sure everything is clean and goes back together with the correct torque and tolarences, etc. I think when I do this and put it back together that it will everything in its place and make sure all is well! The third reason? Cause I like to learn how things work so tearing it down all the way will give me a chance to see how it all goes together and how it works. :-) And I'll not only POLISH but I'll also get it all cleaned better than it has been so far. :-) I have been working on my Browning rifle, and I think having the compound, the silicon carbide paper and the polishing bits will help me with that too... I have had it since I was seven years old - a gift from my dad. It was stolen and recovered and the barrel was pitted and it was in not so good shape when I got it back. Made me sick to look at it and I had planned to re-blue it at some point - even bought a bluing kit from Wal-Mart, but again it made me sick to look at it so I just never got around to messing with it. For Christmas, my wonderful wife had it cerakoted! WOW! Not only is there no more pitting, but now I don't have to worry about it either! Great finish - very smooth - very clean looking! I LOVE IT! With all the shooting we've done recently, I've really been enjoying it! But now it's having trouble feeding. I took it apart and talked to my son that had his 1911 cerakoted and he said he had the same issue. There's always some over spray, and once that starts to 'wear' and 'burn off' it can groove, which makes it not feed smooth. He said he had to use some VERY fine steel wool on it and work with it and it was better, so I started doing that on my rifle. Made a HUGE difference, but still not 'fixed.' Of course it's a slow go, cause I don't want to take off any material, but once I saw that polishing kit and watched the video on it... Well... Let's just say I put the rifle up until all that stuff comes in. Not only will I be doing some 'work' on the feed ramp, but I'll also polish the chamber block and such. Hopefully that will make it all better. :-) Well, that's it! I started to break this up into multiple posts so if there's some part you want to reply to, feel free to break out just that of course. :-) .... This line is intentionally NOT blank. --- MultiMail/Mac v0.52 þ wcQWK 8.0 ÷ Omicron Theta * Memphis, TN * winserver.org .