Subj : Satellites And Packet
To   : All
From : Daryl Stout
Date : Mon May 27 2019 12:13 am

NOTE: The N0KFQ BBS is no more, due to the deaths of the Sysop, K.O. Higgs
(N0KFQ)(SK), and his wife, Billie (KB0WSA)(SK).

However, the basic format noted below should work with any amateur radio
satellite. Just substitute the callsigns and hierarchial addresses, as
noted.

Daryl, WX4QZ

***

            How To Send Packet Messages By Satellite
            ========================================

From        : N0KFQ
To          : USERS
Type/status : BN
Date/time   : 13-Sep 09:46
BID (MID)   : 27233_N0KFQ
Message #   : 27233
Title       : +Messages by Satellite

(This message has been read 1   times today.)

The W0SL satellite gateway has been set up specifically to provide a fast
means of sending personal mail on foreign routes via the packet satellites.
No bulletins and no foreign NTS traffic will be forwarded.

You will need to format the message you wish to send in a particular way.
As an example, you want to send a message to Jim, 4X1AB, whose Home BBS is
4X1YZ. At your BBS prompt send your message to;

 SP REQSAT @ W0SL                 [REQuest SATellite at W0SL]
 Rig problems.                    [Enter the subject as normal]
 SP 4X1AB @ 4X1YZ.ISR.MDLE        [Enter the REAL address as the FIRST
 Hi Jim the rig has been....      [line of the message. A SPACE must exist
 text text etc.....               [between SP and the first callsign.
 /ex

Add the FULL HIERARCHICAL ADDRESS, as shown above, it is REQUIRED for the 
correct routing of your message.  Don't forget the "SP".

So to sum up, at your BBS prompt enter;

     SP REQSAT @ W0SL

when asked for the subject enter whatever you like, such as;

     TNC problems again!!!

When asked for the Message the VERY FIRST LINE must contain the REAL
address, including the HIERARCHICAL ADDRESS, such as;

     SP 4X1AB @ 4X1YZ.ISR.MDLE

Don't forget the "SP".  Do not put anything else on this first line!
Then on the following line, enter the rest of the message as you would
normally, ending with the usual;

     /EX

When the message arrives at W0SL it will be automatically re-addressed
according to the first line of the message.  The subject you entered will
be the same and ALL the headers will remain, so anyone doing a SR reply
will have the reply sent back to the BBS you entered the message on.

N0KFQ  July 16, 2000

=== End of messsage #27233 to USERS from N0KFQ ---
--- SBBSecho 3.07-Win32
 * Origin: RadioWxNet: The Thunderbolt BBS  tbolt.synchro.net (801:1/2)
 þ Synchronet þ Temple of Doom BBS - tod.eothnet.com

.