(DIR) Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
 (HTM) https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
 (DIR) Return to: Chainsaw Collection Pics - Signs - Whats on your be...
       *****************************************************
       #Post#: 63733--------------------------------------------------
       Re: Whats on your bench today
       By: Al Smith Date: October 22, 2015, 7:53 pm
       ---------------------------------------------------------
       I wish I'd have known about the last one .I'll have about 12-14
       bucks in the P70 filter .With either one I'm going to have to do
       some modifications .
       They look like they bolt up like a Stihl on studs with nuts that
       hold the carb .This thing has long screws and I doubt I have
       enough room to slip the carb over the left hand lower stud if I
       go that route .
       There's a lot of things the designers could have done to make
       this thing more user friendly but they didn't .
       #Post#: 63734--------------------------------------------------
       Re: Whats on your bench today
       By: Chainsawrepair Date: October 22, 2015, 7:59 pm
       ---------------------------------------------------------
       [quote author=Al Smith link=topic=1732.msg63733#msg63733
       date=1445561623]
       I wish I'd have known about the last one .I'll have about 12-14
       bucks in the P70 filter .With either one I'm going to have to do
       some modifications .
       They look like they bolt up like a Stihl on studs with nuts that
       hold the carb .This thing has long screws and I doubt I have
       enough room to slip the carb over the left hand lower stud if I
       go that route .
       There's a lot of things the designers could have done to make
       this thing more user friendly but they didn't .
       [/quote]
       Link to the last one sent in PM.
       #Post#: 64141--------------------------------------------------
       Re: Re: Whats on your bench today
       By: Chainsawrepair Date: October 31, 2015, 8:42 pm
       ---------------------------------------------------------
       Just had 2 guys in dropping off a stihl 029 super and husqvarna
       350.  9:30pm at night after deer hunting.
       Dont get that service at the local dealer. ;)
       #Post#: 64531--------------------------------------------------
       Re: Whats on your bench today
       By: dannyupsolate Date: November 6, 2015, 1:16 pm
       ---------------------------------------------------------
       poulan 3314 owner said it won't oil.  found melted chainbrake
       melted oiler most of it fused to saw body. putting his motor in
       another body now.
       #Post#: 64533--------------------------------------------------
       Re: Whats on your bench today
       By: 3000 FPS Date: November 6, 2015, 1:40 pm
       ---------------------------------------------------------
       Sound like it was ran with the chainbrake on.
       #Post#: 64534--------------------------------------------------
       Re: Whats on your bench today
       By: dannyupsolate Date: November 6, 2015, 1:45 pm
       ---------------------------------------------------------
       seen that before but not to total meltdown like this one :o
       #Post#: 64536--------------------------------------------------
       Re: Whats on your bench today
       By: 3000 FPS Date: November 6, 2015, 1:49 pm
       ---------------------------------------------------------
       [quote author=dannyupsolate link=topic=1732.msg64534#msg64534
       date=1446839127]
       seen that before but not to total meltdown like this one :o
       [/quote]
       That is because the owner of the saw is usually smart enouph to
       figure out what is going on, but once in awhile you get one that
       is just alittle slow on what that smell is.  Oh well.
       #Post#: 64538--------------------------------------------------
       Re: Whats on your bench today
       By: dannyupsolate Date: November 6, 2015, 2:13 pm
       ---------------------------------------------------------
       ;D had to put it new body old body melted so bad new oil pump
       would not fit in ;D
       #Post#: 64540--------------------------------------------------
       Re: Whats on your bench today
       By: 3000 FPS Date: November 6, 2015, 2:56 pm
       ---------------------------------------------------------
       I got the ole Poulan 405 out the other day and no start.   Order
       a carb kit and put it in and back to running like a champ.  I
       did some noodling with it and that thing just makes me smile
       with the torque it has.  Plus it clears those long noodles like
       no body's business.
       #Post#: 64541--------------------------------------------------
       Re: Whats on your bench today
       By: dannyupsolate Date: November 6, 2015, 3:08 pm
       ---------------------------------------------------------
       be glad when I know enough to work on the quality saws. trying
       to make all my dumb mistakes on the cheap saws.
       *****************************************************
 (DIR) Previous Page
 (DIR) Next Page