(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Chainsaw Collection Pics - Signs - Whats on your be...
*****************************************************
#Post#: 70215--------------------------------------------------
Re: Whats on your bench today
By: dutchsawdoctor Date: March 12, 2016, 2:40 am
---------------------------------------------------------
here mine drawing of one of the repairs on the Solo
twin
(HTM) http://up.picr.de/21143432zc.gif
(HTM) http://up.picr.de/24844732ei.png
#Post#: 70348--------------------------------------------------
Re: Whats on your bench today
By: Chainsawrepair Date: March 16, 2016, 6:34 pm
---------------------------------------------------------
[quote author=Cut4fun . link=topic=1732.msg69771#msg69771
date=1456430324]
[quote author=dutchsawdoctor link=topic=1732.msg69662#msg69662
date=1456043745]
Hahaha :D :D me to, but a bar is not in mine possesion :'( :'(
will ask one in semtember at a show ;D
saul
[/quote]
I think it is to high IMHO. Butttttttt here you go. $150 and
ship.
[img]
(HTM) https://scontent-iad3-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/q84/s720x720/12642735_563202897182379_3449027062584793799_n.jpg?oh=a92ff08de7277a84461b1a6d4deddd6f&oe=5759F2A4[/img]
[img]
(HTM) https://scontent-iad3-1.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/s720x720/12644713_563202923849043_523485422627093828_n.jpg?oh=b6c3c1ec3557d40e6d4a55f8996b70f0&oe=57555D2B[/img]
[img]
(HTM) https://scontent-iad3-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/q82/s720x720/12654254_563202910515711_6662181572451216938_n.jpg?oh=cf72b3670977a614d79717c3c6d2b9c3&oe=57589184[/img]
[/quote]
Seems to be a misunderstanding I do not have or sell bow bars.
Jim has a few he has showed here for his own use.
This bow bar was for sale by another party. Not by me. I only
find them and let folks looking know about them. I will not buy
one without given a OK and $ in a PM. As I have no use for them
and wont buy just to have on my shelf.
I have no problem getting them if given the OK and $.
#Post#: 70361--------------------------------------------------
Re: Whats on your bench today
By: 3000 FPS Date: March 16, 2016, 8:42 pm
---------------------------------------------------------
I worked on a Husky 240 today that I swear had a fuel problem.
But through a process of elimination and scratching my head a
lot I decided to replace the coil. Bingo the coil was the
culprit. The saw would start and run for about 15 seconds and
shut off. You could pull the rope right away and it would do
the same thing. Never seen a coil do that before. I put on a
new coil and it ran great afterwards.
#Post#: 70364--------------------------------------------------
Re: Whats on your bench today
By: Chainsawrepair Date: March 17, 2016, 11:21 am
---------------------------------------------------------
[quote author=3000 FPS link=topic=1732.msg70361#msg70361
date=1458178958]
I worked on a Husky 240 today that I swear had a fuel problem.
But through a process of elimination and scratching my head a
lot I decided to replace the coil. Bingo the coil was the
culprit. The saw would start and run for about 15 seconds and
shut off. You could pull the rope right away and it would do
the same thing. Never seen a coil do that before. I put on a
new coil and it ran great afterwards.
[/quote]
That would be a good one to have in the brand section under
husqvarna 240 coil. I never heard of one that way either.
#Post#: 70373--------------------------------------------------
Re: Whats on your bench today
By: 3000 FPS Date: March 17, 2016, 2:49 pm
---------------------------------------------------------
Ok I will copy it and move it over there under Husqvarna.
#Post#: 70423--------------------------------------------------
Re: Whats on your bench today
By: 3000 FPS Date: March 19, 2016, 3:33 pm
---------------------------------------------------------
I installed new crank seals in my recent Stihl MS460 that I got.
So far I have replaced the brake handle, crank seals, clutch
drum and bearing, new rim, new air filter, air filter cover, and
new springs in the clutch. I will still need a new piston and
rings and maybe the cylinder. I still have to pull the cylinder
off and see how bad it is.
#Post#: 70434--------------------------------------------------
Re: Whats on your bench today
By: dutchsawdoctor Date: March 20, 2016, 3:42 pm
---------------------------------------------------------
;D ;D ;D
(HTM) http://up.picr.de/24926507pf.jpg
(HTM) http://up.picr.de/24926506oj.jpg
(HTM) http://up.picr.de/24926508hl.jpg
(HTM) http://up.picr.de/24926509fo.jpg
(HTM) http://up.picr.de/24926517kw.jpg
(HTM) http://up.picr.de/24926518tj.jpg
(HTM) http://up.picr.de/24926519bl.jpg
(HTM) http://up.picr.de/24926521xd.jpg
(HTM) http://up.picr.de/24935739wp.jpg
(HTM) http://up.picr.de/24935740kt.jpg
(HTM) http://up.picr.de/24935742ty.jpg
(HTM) http://up.picr.de/24935748pw.jpg
#Post#: 70840--------------------------------------------------
Re: Whats on your bench today
By: 3000 FPS Date: April 2, 2016, 8:06 pm
---------------------------------------------------------
Nice Saul. You must have a nice collection of old saws now.
#Post#: 70847--------------------------------------------------
Re: Whats on your bench today
By: dutchsawdoctor Date: April 3, 2016, 1:51 am
---------------------------------------------------------
Thanks ser, yes i have some nice
saws
(HTM) http://up.picr.de/21143425sz.gif
saul
#Post#: 70863--------------------------------------------------
Re: Whats on your bench today
By: 3000 FPS Date: April 3, 2016, 1:23 pm
---------------------------------------------------------
Finished the Husqvarna K960 and will sharpen a few chains today.
A pic of part of my shop and a few of the saws.
*****************************************************
(DIR) Previous Page
(DIR) Next Page