(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Chainsaw Collection Pics - Signs - Whats on your be...
*****************************************************
#Post#: 38726--------------------------------------------------
Re: Whats on your bench today
By: dutchsawdoctor Date: April 17, 2014, 3:40 am
---------------------------------------------------------
DOLPIMA PS90
[img width=700 height=525]
(HTM) http://up.picr.de/17988030zd.jpg[/img]
[img width=700 height=525]
(HTM) http://up.picr.de/17988031rg.jpg[/img]
[img width=700 height=525]
(HTM) http://up.picr.de/17988032vi.jpg[/img]
[img width=700 height=525]
(HTM) http://up.picr.de/17988033pb.jpg[/img]
[img width=700 height=525]
(HTM) http://up.picr.de/17988034hr.jpg[/img]
[img width=700 height=525]
(HTM) http://up.picr.de/17988035ep.jpg[/img]
[img width=700 height=525]
(HTM) http://up.picr.de/17988036cv.jpg[/img]
[img width=700 height=525]
(HTM) http://up.picr.de/17988037rf.jpg[/img]
[img width=700 height=525]
(HTM) http://up.picr.de/17988039ci.jpg[/img]
[img width=700 height=525]
(HTM) http://up.picr.de/17988041rt.jpg[/img]
[img width=700 height=525]
(HTM) http://up.picr.de/17988043eb.jpg[/img]
[img width=700 height=525]
(HTM) http://up.picr.de/17988045ct.jpg[/img]
[img width=700 height=525]
(HTM) http://up.picr.de/17988046jt.jpg[/img]
#Post#: 38729--------------------------------------------------
Re: Whats on your bench today
By: super44 Date: April 17, 2014, 9:06 am
---------------------------------------------------------
A McCulloch 125 for a resurrection. Having some trouble getting
the side plate off so the crank can slide out. I think I have
all the screws loose but it seems determind to stay right where
it is. Any suggestions??
#Post#: 38975--------------------------------------------------
Re: Whats on your bench today
By: KilliansRedLeo Date: April 22, 2014, 8:15 am
---------------------------------------------------------
A Husqvarna 362XP that is going to get a top end, MM, and
whatever else it needs. Got it off feebay so it is not complete
but looks to be in decent shape. May even split the cases for
new bearings and seals.
#Post#: 38994--------------------------------------------------
Re: Whats on your bench today
By: 1manband Date: April 22, 2014, 4:38 pm
---------------------------------------------------------
painted the legs on the lathe. one coat, primer, 2 coats of
ford tractor light grey enamel. still have not put it together
yet. will need more help for that.
tweaked the air filter pipe to carb; and the carb itself, on the
echo. got waaaaay too carried away with the carb. has great
acceleration, and midrange transition. problem is now, will
have to tone it down, idle is now unsteady. too bad, because
other than at idle, its awesome. oh well.
---------------------------------------
dutch......... what is that photo of, that resembles a crank
bearing half?
tim..... there is a resonable $ HVA 576 out my way....... maybe
of interest.
-joe
#Post#: 38997--------------------------------------------------
Re: Whats on your bench today
By: 660magnum Date: April 22, 2014, 5:08 pm
---------------------------------------------------------
My primary concern has been yard work since early April. I've
picked up fallen dead limbs until I'm blue in the face - was a
bad weather year. I've got to burn them but when the moisture
is right, the wind is not. I have mowed the yard twice already.
The ditch by the highway is too wet as it is like a small
stream. I caught the usual wet areas of the yard as being dry
yesterday and mowed them, no problem.
#Post#: 39021--------------------------------------------------
Re: Whats on your bench today
By: dutchsawdoctor Date: April 22, 2014, 10:12 pm
---------------------------------------------------------
Joe... do you mean that clutch part of the dolpina ?
#Post#: 39103--------------------------------------------------
Re: Whats on your bench today
By: 1manband Date: April 23, 2014, 7:46 pm
---------------------------------------------------------
[quote author=dutchsawdoctor link=topic=1732.msg39021#msg39021
date=1398222755]
Joe... do you mean that clutch part of the dolpina ?
[/quote]
if you say it is, dutch.... i have never seen any clutch parts
of a dolpina before. hahaha. that's why i asked. looks like
fun.
-joe
#Post#: 39121--------------------------------------------------
Re: Whats on your bench today
By: dutchsawdoctor Date: April 23, 2014, 11:55 pm
---------------------------------------------------------
[quote author=1manband link=topic=1732.msg39103#msg39103
date=1398300407]
[quote author=dutchsawdoctor link=topic=1732.msg39021#msg39021
date=1398222755]
Joe... do you mean that clutch part of the dolpina ?
[/quote]
if you say it is, dutch.... i have never seen any clutch parts
of a dolpina before. hahaha. that's why i asked. looks like
fun.
-joe
[/quote]
o ya for shoure a lot of fun i have here Joe ;D
#Post#: 39505--------------------------------------------------
Re: Whats on your bench today
By: Cut4fun Date: April 30, 2014, 7:17 pm
---------------------------------------------------------
Had a 353 and 268 on the bench today. In/Out fixes.
#Post#: 39699--------------------------------------------------
Re: Whats on your bench today
By: dutchsawdoctor Date: May 3, 2014, 3:49 pm
---------------------------------------------------------
First type Dolmar CC, first test run
this one has the small clutch "only two schoe's"
(HTM) http://youtu.be/ilkljXyd1_0
*****************************************************
(DIR) Previous Page
(DIR) Next Page