(DIR) Return Create A Forum - Home --------------------------------------------------------- Chainsaw Repair (HTM) https://chainsawrepair.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: IPL and Service Manuals ***************************************************** #Post#: 20396-------------------------------------------------- Need Workshop Manual for Husky 42 By: farmboy Date: June 10, 2013, 8:57 pm --------------------------------------------------------- My link to gardening-tools-direct.co.uk doesn't work anymore. Need WS manual for Husky 42. Got the case split bearings in case. Probably should have heated the case flywheel side so the bearing would have come out on crank. Don't know how to get the flywheel side out. Shep #Post#: 20397-------------------------------------------------- Re: Need Workshop Manual for Husky 42 By: 660magnum Date: June 10, 2013, 9:12 pm --------------------------------------------------------- Look in your Email . . . I sent you one there??? #Post#: 20398-------------------------------------------------- Re: Need Workshop Manual for Husky 42 By: 660magnum Date: June 10, 2013, 9:15 pm --------------------------------------------------------- If the bearing is in a blind pocket, you can heat the case up to about 300F in the oven and bang the parting line of the case half against a board and it will shake out. #Post#: 20400-------------------------------------------------- Re: Need Workshop Manual for Husky 42 By: farmboy Date: June 11, 2013, 8:17 am --------------------------------------------------------- [quote author=660magnum link=topic=1945.msg20397#msg20397 date=1370916773] Look in your Email . . . I sent you one there??? [/quote] Thanks [quote author=660magnum link=topic=1945.msg20398#msg20398 date=1370916916] If the bearing is in a blind pocket, you can heat the case up to about 300F in the oven and bang the parting line of the case half against a board and it will shake out. It is in a blind pocket. This is exactly what I needed to know. Thank you very much. Shep #Post#: 20952-------------------------------------------------- Re: Need Workshop Manual for Husky 42 By: SawTroll Date: July 4, 2013, 3:52 pm --------------------------------------------------------- The manual is a too large file, so I can't attach it - sorry. :( *****************************************************