(DIR) Return Create A Forum - Home --------------------------------------------------------- Chainsaw Repair (HTM) https://chainsawrepair.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Welding Shop ***************************************************** #Post#: 27855-------------------------------------------------- Dual port muffler mods, various. By: alsled Date: November 20, 2013, 6:42 pm --------------------------------------------------------- 390 xp, doner parts from a old 350 #Post#: 27856-------------------------------------------------- Re: Dual port muffler mods, various. By: alsled Date: November 20, 2013, 6:43 pm --------------------------------------------------------- 390xp #Post#: 27857-------------------------------------------------- Re: Dual port muffler mods, various. By: alsled Date: November 20, 2013, 6:45 pm --------------------------------------------------------- 365 special muffler, getting it ready for a Hyway BB kit. #Post#: 27858-------------------------------------------------- Re: Dual port muffler mods, various. By: alsled Date: November 20, 2013, 6:46 pm --------------------------------------------------------- Lets go square on a 394 #Post#: 27859-------------------------------------------------- Re: Dual port muffler mods, various. By: Chainsawrepair Date: November 20, 2013, 6:47 pm --------------------------------------------------------- Nice #Post#: 27861-------------------------------------------------- Re: Dual port muffler mods, various. By: 3000 FPS Date: November 20, 2013, 6:56 pm --------------------------------------------------------- Alright alsled that is what I like seeing. Some good ole mods using the Mig. Here is one I did. I took two round pieces of pipe and cut a section out of both of them and then welded them together where they were cut. Then I welded them to the muffler. I have a small Hobart mig welder that I used for this. #Post#: 27864-------------------------------------------------- Re: Dual port muffler mods, various. By: alsled Date: November 20, 2013, 7:03 pm --------------------------------------------------------- Nice work 3000 fps, The 390 muffler I did with a oxy acy torch, I was to lazy to take the .035 wire out of the mig and put .023 in. The only concern I would have with your mod is, burying the outlet in a bunch of sawdust if cutting low to the ground, maybe restrict it? #Post#: 27868-------------------------------------------------- Re: Dual port muffler mods, various. By: 3000 FPS Date: November 20, 2013, 7:18 pm --------------------------------------------------------- [quote author=alsled link=topic=2587.msg27864#msg27864 date=1384995816] Nice work 3000 fps, The 390 muffler I did with a oxy acy torch, I was to lazy to take the .035 wire out of the mig and put .023 in. The only concern I would have with your mod is, burying the outlet in a bunch of sawdust if cutting low to the ground, maybe restrict it? [/quote] That is true but I doubt that I would ever use this saw for cutting a stump flush. I have fallen a few trees with it but I was high enough that it did not present a problem. #Post#: 27870-------------------------------------------------- Re: Dual port muffler mods, various. By: alsled Date: November 20, 2013, 7:27 pm --------------------------------------------------------- Understood, I don't fall many trees, but it was just in the back of my mind when doing mine. #Post#: 27871-------------------------------------------------- Re: Dual port muffler mods, various. By: 3000 FPS Date: November 20, 2013, 7:31 pm --------------------------------------------------------- I will go out with the brother in law to cut fire wood and we will fall about 15 trees every year. We only do 5 at time and do it in different trips. ***************************************************** (DIR) Next Page