(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Partner
*****************************************************
#Post#: 31264--------------------------------------------------
44mm aftermarket 5000 plus and 490 pistons
By: Chainsawrepair Date: January 8, 2014, 12:32 pm
---------------------------------------------------------
Finally someone is making them. 44mm aftermarket Partner 5000
plus and Jonsered 490 piston kit
(HTM) http://store.chainsawr.com/products/jonsered-490-chainsaw-44mm-windowed-piston-kit-503-10-02-01-new
#Post#: 31266--------------------------------------------------
Re: 44mm aftermarket partner 5000 plus and Jonsered 490 piston k
it
By: KilliansRedLeo Date: January 8, 2014, 1:13 pm
---------------------------------------------------------
Yeah, but the dreaded two ear pin clips.
#Post#: 31267--------------------------------------------------
Re: 44mm aftermarket partner 5000 plus and Jonsered 490 piston k
it
By: Chainsawrepair Date: January 8, 2014, 1:17 pm
---------------------------------------------------------
Thats a easy fix. I have many oem ones left over. If they fit.
But I have sold out of all the 500 5000 490 stuff already
anyways. Still cool to see a aftermarket piston though.
NOS OEM kits was bringing 100-130. I sold them for what I had
in them to friends when I got out of the series.
#Post#: 44963--------------------------------------------------
Re: 44mm aftermarket 5000 plus and 490 pistons
By: aclarke Date: August 18, 2014, 10:16 pm
---------------------------------------------------------
Did husky use the closed port 44mm jug on any saws? Have a
couple clean 5000s with badly scored jugs I'd like to restore
#Post#: 45086--------------------------------------------------
Re: 44mm aftermarket 5000 plus and 490 pistons
By: Chainsawrepair Date: August 21, 2014, 11:29 am
---------------------------------------------------------
[quote author=aclarke link=topic=2865.msg44963#msg44963
date=1408418174]
Did husky use the closed port 44mm jug on any saws? Have a
couple clean 5000s with badly scored jugs I'd like to restore
[/quote]
Only one I know of that fits in 44mm was the open port 50 in
husky. No closed port in 44mm I can think of, maybe I am
forgetting one?
#Post#: 45092--------------------------------------------------
Re: 44mm aftermarket 5000 plus and 490 pistons
By: aclarke Date: August 21, 2014, 1:21 pm
---------------------------------------------------------
There's been mention of the closed port 44mm on other husky
motors but I've never heard any definitive responses to that.
#Post#: 45725--------------------------------------------------
Re: 44mm aftermarket 5000 plus and 490 pistons
By: SawTroll Date: September 3, 2014, 6:50 am
---------------------------------------------------------
[quote author=Cut4fun_ link=topic=2865.msg45086#msg45086
date=1408638575]
[quote author=aclarke link=topic=2865.msg44963#msg44963
date=1408418174]
Did husky use the closed port 44mm jug on any saws? Have a
couple clean 5000s with badly scored jugs I'd like to restore
[/quote]
Only one I know of that fits in 44mm was the open port 50 in
husky. No closed port in 44mm I can think of, maybe I am
forgetting one?
[/quote]
I am not sure if the early 44mm 51 EPA saws used an open or a
closed port one? It hardly is availiable anyway though, if it
was a "special" for that version, as the concept of smaller bore
EPA versions was short lived....
#Post#: 45727--------------------------------------------------
Re: 44mm aftermarket 5000 plus and 490 pistons
By: aclarke Date: September 3, 2014, 11:21 am
---------------------------------------------------------
Ordered the meteor piston/cylinder kit for the partner, I'll
post a few pics when it arrives. Just picked up a clean 51 with
45mm open port cyl. Piston us lightly scored on exhaust side,
cleaned up the cylinder and checked seals, all good. Maybe
overheated with dull chain? Intake side was perfect, scored
width of exhaust but ring wasn't stuck. Kinda odd.
#Post#: 45729--------------------------------------------------
Re: 44mm aftermarket 5000 plus and 490 pistons
By: aclarke Date: September 3, 2014, 11:43 am
---------------------------------------------------------
Found some "slab side" 45mm oem pistons that might work well
with the open transfers. Anyone know the original application
for p/n 502 128 002 was?
Adam
#Post#: 45733--------------------------------------------------
Re: 44mm aftermarket 5000 plus and 490 pistons
By: Chainsawrepair Date: September 3, 2014, 12:25 pm
---------------------------------------------------------
Coming back to Jonsered RS52 RS51 502128002 PISTON CPL 45 MM
oem $87 ( I havent a clue on what saw that is). I see that part
number for husky too, but cant figure out in which saw.
Jred looks like a clearing saw?
(HTM) http://www.jonsered.com/ddoc/JONI/JONI2002_AAaa/JONI2002_AAaa_106274262.pdf
*****************************************************
(DIR) Next Page