(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Stihl
*****************************************************
#Post#: 53662--------------------------------------------------
Re: Stihl info
By: splitter2784 Date: February 3, 2015, 8:24 pm
---------------------------------------------------------
Where does the ms290 fit in on this chart?
#Post#: 53672--------------------------------------------------
Re: Stihl info
By: 660magnum Date: February 4, 2015, 12:14 am
---------------------------------------------------------
1127 .......................029, 039
............................... 1992-2000
............................... 2000-2012
............................... 2000-2009
The 029 became the MS 290, it is a model 1127
#Post#: 54570--------------------------------------------------
Re: Stihl info
By: Cut4fun Date: February 20, 2015, 3:29 pm
---------------------------------------------------------
Came across this. Might help someone.
5910 007 2205 AS crankshaft tool (clutch side
removal/installation)
5910 007 2200 ZS crankshaft tool (ignition side
removal/installation)
0000 890 1711 Testing Pressure/Vacuum kit (has a couple small
pieces missing, like the two small tubes)
5910 890 4400 Oil Seal Puller with 3 sets of jaws
1111 890 6400 Ignition air gap gauge
1110 890 4500 small flywheel puller for most saws up to 046 and
old style 066
1106 890 4501 large flywheel puller for the larger saws like new
066, 084 088 076 etc
0000 893 2600 piston ring clamp
0000 893 5903 piston stop
1108 893 4800 wood install block
Torx screw T handle wrench
Exhaust block/gasket for 026-046 saws
old style clutch wrench
Oil Seal Installation Tools
1115 893 4600 for 046, 045 056 and more
1118 893 2401 for 028, 024 , 026, 034, 036, 044
1124 893 2400 for 084 and 088
1127 893 2400 for 038, 084, 088, 064, 066, 029, 039 (used to be
1119 893 2401 but was renumbered)
1121 893 2400 for 024, 026, 034, 036
1128 890 3900 for 044, 064 066
Also 4 sleeves that fit against crankshaft under these on the
clutch side
Bearing removal/install tools
1124 893 7200 for 084 088
1118 893 7200 for 028 024 026 034 036 044 046
1122 893 7200 for 064 066
1120 893 7200 for 044 046 009 010 011 012
1119 893 7200 for 038 066 064
#Post#: 54572--------------------------------------------------
Re: Stihl info
By: aclarke Date: February 20, 2015, 4:22 pm
---------------------------------------------------------
Good deal. Thk
#Post#: 58770--------------------------------------------------
Re: Stihl info
By: 1955cj5 Date: June 15, 2015, 3:01 pm
---------------------------------------------------------
[quote author=Cut4fun . link=topic=291.msg16272#msg16272
date=1359989549]
I cant remember the stihl 460 rescue handle D ring starter
handle part number. Anyone so we can help the guy with the
dolmar.
Found it 1128-195-3401 for the stihl 460 rescue handles. $4 to
$7 depending on dealer.
[IMG]
(HTM) http://i59.photobucket.com/albums/g289/doemaster789/Copyof066D-ring003-1.jpg[/img]
[/quote]
Ok I gots to get me one of those pull handles for my 034, I
should be able to walk into my local dealer with the part number
right? No reason I couldn't use that on any saw I wanted???
#Post#: 58771--------------------------------------------------
Re: Stihl info
By: Chainsawrepair Date: June 15, 2015, 3:16 pm
---------------------------------------------------------
[quote author=1955cj5 link=topic=291.msg58770#msg58770
date=1434398465]
[quote author=Cut4fun . link=topic=291.msg16272#msg16272
date=1359989549]
I cant remember the stihl 460 rescue handle D ring starter
handle part number. Anyone so we can help the guy with the
dolmar.
Found it 1128-195-3401 for the stihl 460 rescue handles. $4 to
$7 depending on dealer.
[IMG]
(HTM) http://i59.photobucket.com/albums/g289/doemaster789/Copyof066D-ring003-1.jpg[/img]
[/quote]
Ok I gots to get me one of those pull handles for my 034, I
should be able to walk into my local dealer with the part number
right? No reason I couldn't use that on any saw I wanted???
[/quote]
Yep should be able to at any dealer worth their salt.
By the way welcome to the site and enjoy. ;)
#Post#: 58773--------------------------------------------------
Re: Stihl info
By: 1955cj5 Date: June 15, 2015, 3:53 pm
---------------------------------------------------------
Thanks man, glad to be here lots of knowledge.
#Post#: 58774--------------------------------------------------
Re: Stihl info
By: Chainsawrepair Date: June 15, 2015, 4:38 pm
---------------------------------------------------------
[quote author=1955cj5 link=topic=291.msg58773#msg58773
date=1434401609]
Thanks man, glad to be here lots of knowledge.
[/quote]
Any saw you need. I put one on my dads poulan 3300 that was
starting to hurt his hands with the 2 finger T handle they used.
I even added a rubber hose to extend them for cold start racing.
Stihl 460 rescue handle big d ring grip 11281953401
(HTM) http://i59.photobucket.com/albums/g289/doemaster789/Copyofblack7900003.jpg
[img width=600
height=329]
(HTM) http://i59.photobucket.com/albums/g289/doemaster789/5000/Copyofmoreonsaws007.jpg[/img]
#Post#: 58780--------------------------------------------------
Re: Stihl info
By: jmester Date: June 15, 2015, 7:47 pm
---------------------------------------------------------
[quote author=Cut4fun link=topic=291.msg54570#msg54570
date=1424467788]
Bearing removal/install tools
1124 893 7200 for 084 088
1118 893 7200 for 028 024 026 034 036 044 046
1122 893 7200 for 064 066
1120 893 7200 for 044 046 009 010 011 012
1119 893 7200 for 038 066 064
[/quote]
These will also work on most of the pro husky saws as well. Used
the 1119 893 7200 to put the crank bearings in my 394 case. Not
as press mandrel like they are made but just as a holder for the
bearing so I don't burn my fingers on the case. They are also
fairly inexpensive.
#Post#: 75051--------------------------------------------------
Re: Stihl info
By: Chainsawrepair Date: December 24, 2016, 9:01 am
---------------------------------------------------------
Just copy and pasting info to save.
The year of the Stihl saws
In doubt you can ask with Stihl with the serial number and try
to give an answer.
Sometimes you can read the sticker on the brake lever with
"newer" saws.
Then, on the motorcycle and on plastic components at Stihl,
so-called date clocks can be seen. In which year were they
introduced? Outside the numbers on the watch from 1 to 12
describe the month of manufacture. The year of production is
coded by letter:
Year of construction
1984
1985
...
1999
2000
2001
*****************************************************
(DIR) Previous Page
(DIR) Next Page