(DIR) Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
 (HTM) https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
 (DIR) Return to: IPL and Service Manuals
       *****************************************************
       #Post#: 32749--------------------------------------------------
       Partner/Husqvarna K700 Cutoff Saw IPL and SM Needed
       By: Eccentric Date: January 25, 2014, 7:16 pm
       ---------------------------------------------------------
       Hello gents,
       I need an IPL and Workshop Manual for a Partner K700 demo saw.
       On Barrett's site I found an IPL for the Husqvarna branded K650,
       but not the 700 (and no mention of Partner........although I
       understand that these machines are actually Husqvarnas, and were
       just branded as Partners here in the US).
       From what I've gathered from ebay listings (which aren't always
       correct), the P/C for the 650 and 700 are the same.  Don't know
       for sure however.
       I'll most likely be putting an aftermarket P/C on this machine
       and either keeping it or sending it on down the road.  Thanks in
       advance!
       #Post#: 32759--------------------------------------------------
       Re: Partner/Husqvarna K700 Cutoff Saw IPL and SM Needed
       By: 660magnum Date: January 25, 2014, 9:31 pm
       ---------------------------------------------------------
       Look in your SBC Global
       #Post#: 32760--------------------------------------------------
       Re: Partner/Husqvarna K700 Cutoff Saw IPL and SM Needed
       By: 660magnum Date: January 25, 2014, 9:36 pm
       ---------------------------------------------------------
       I think the cut-off saw is timed for a lower rpm than the
       chainsaw versions to keep from blowing up the blade?
       #Post#: 32765--------------------------------------------------
       Re: Partner/Husqvarna K700 Cutoff Saw IPL and SM Needed
       By: Eccentric Date: January 25, 2014, 10:18 pm
       ---------------------------------------------------------
       [quote author=660magnum link=topic=2975.msg32760#msg32760
       date=1390707415]
       I think the cut-off saw is timed for a lower rpm than the
       chainsaw versions to keep from blowing up the blade?
       [/quote]
       You're correct.  Most of these types of machines have some sort
       of governor.  The saws built over the last 30 years or so
       usually have limited ignitions.  Earlier machines (such as a
       Homelite XL-98 or Poulan 5.2/14) have governed carburetors.
       #Post#: 32766--------------------------------------------------
       Re: Partner/Husqvarna K700 Cutoff Saw IPL and SM Needed
       By: Eccentric Date: January 25, 2014, 10:18 pm
       ---------------------------------------------------------
       [quote author=660magnum link=topic=2975.msg32759#msg32759
       date=1390707102]
       Look in your SBC Global
       [/quote]
       Got it!  Thanks Jim.  Looking at the SM.........it seems this
       model has a governed carb (like older machines) while the larger
       K950 and K1250 machines have the limited ignition.  That's
       interesting, as my machine has a green coil..........and I
       always thought those were limited.  Could be that this machine
       has a limited coil too.....
       *****************************************************