(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Jonsered
*****************************************************
#Post#: 33753--------------------------------------------------
Jonsered 525 etc CRANKSHAFT SEAL 504146204
By: tassin85 Date: February 8, 2014, 9:26 am
---------------------------------------------------------
hello,
im looking for this seal for my 525 but now obsolete... is
there a replacement part or a shop where I could find one?
thanks for your help.
PS: I'm french linving in France.
#Post#: 33754--------------------------------------------------
Re: CRANKSHAFT SEAL 504146204
By: 660magnum Date: February 8, 2014, 9:29 am
---------------------------------------------------------
If you knew the size of the seal, you could get one at the local
bearing supply business?
Seal pocket size?
Crankshaft size?
#Post#: 33759--------------------------------------------------
Re: CRANKSHAFT SEAL 504146204
By: tassin85 Date: February 8, 2014, 9:43 am
---------------------------------------------------------
the seal is still in place, I'm afraid to remove it. is there a
special tool or a tip?
is build in caoutchouc and metal.
thanks magnum
#Post#: 33763--------------------------------------------------
Re: CRANKSHAFT SEAL 504146204
By: Cut4fun Date: February 8, 2014, 10:02 am
---------------------------------------------------------
More models with the seal number you listed. JONSERED 450 455
510 520 525 535 CRANKSHAFT SEAL 504146204
#Post#: 33767--------------------------------------------------
Re: CRANKSHAFT SEAL 504146204
By: Cut4fun Date: February 8, 2014, 10:14 am
---------------------------------------------------------
sold out now but a member had them.
(HTM) http://www.sawagain.com/jonsered-450-455-510-520-525-535-crankshaft-seal-504146204/
Looking at that seal a drywall screw and pliers to pull screw
redneck method would work.
#Post#: 33824--------------------------------------------------
Re: CRANKSHAFT SEAL 504146204
By: tassin85 Date: February 8, 2014, 3:57 pm
---------------------------------------------------------
thanks for all but what is the redneck method?
do I have to drill and screw the drywall screw into the seal and
use pliers to remove it pulling the screw?
#Post#: 33825--------------------------------------------------
Re: CRANKSHAFT SEAL 504146204
By: Chainsawrepair Date: February 8, 2014, 4:05 pm
---------------------------------------------------------
I use small now to poke hole screw in drywall screw and then
jerk out with pliers. Can be tough at times and need to pull
several times, some do pop right out. Some times might need to
make 2nd hole.
Yep all above equals Redneck Method IMO.
#Post#: 33827--------------------------------------------------
Re: CRANKSHAFT SEAL 504146204
By: tassin85 Date: February 8, 2014, 4:13 pm
---------------------------------------------------------
and you think I could find a similar in a chainsaw shop?
thanks for the method I will try tomorrow.
#Post#: 33829--------------------------------------------------
Re: CRANKSHAFT SEAL 504146204
By: Chainsawrepair Date: February 8, 2014, 5:35 pm
---------------------------------------------------------
If you can find NOS New Old Stock. Dont cost nothing to ask or
call around. Good Luck.
#Post#: 33876--------------------------------------------------
Re: CRANKSHAFT SEAL 504146204
By: tassin85 Date: February 9, 2014, 10:46 am
---------------------------------------------------------
seal removed with redneck method!
now I have to find a new one.......
*****************************************************
(DIR) Next Page