(DIR) Return Create A Forum - Home --------------------------------------------------------- Chainsaw Repair (HTM) https://chainsawrepair.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Homelite ***************************************************** #Post#: 42971-------------------------------------------------- fuel to air settings By: circe Date: July 16, 2014, 10:55 am --------------------------------------------------------- hi do anybody have the tuning settings on the homelite super 2. it develop a little flu after 17 years of hard work. when it is cold it works like a dream, but after about 2 minutes it just cut out and wont start. when it has cooled down it start with 1 pull. i cleaned and replaced all filters and feul lines. i also cleaned the carb. thanks frikkie #Post#: 42973-------------------------------------------------- Re: feul to air settings By: 660magnum Date: July 16, 2014, 11:03 am --------------------------------------------------------- Two turns on each needle - it should run and you can adjust from there. #Post#: 43011-------------------------------------------------- Re: fuel to air settings By: circe Date: July 17, 2014, 1:55 pm --------------------------------------------------------- hi thanks. i got it running today and made a truckload of firewood. frikkie *****************************************************