(DIR) Return Create A Forum - Home --------------------------------------------------------- Chainsaw Repair (HTM) https://chainsawrepair.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Homelite ***************************************************** #Post#: 60976-------------------------------------------------- Homelite 240 By: pete Date: August 27, 2015, 7:09 am --------------------------------------------------------- scored a 240 last weekend at a swap for a fiver with no starter cord as I have never dug into a homey (have a few of the smaller ones on a shelf with a 150) do these 240s have the carb boot that I see mentioned so often cheers #Post#: 60978-------------------------------------------------- Re: Homelite 240 By: Chainsawrepair Date: August 27, 2015, 9:05 am --------------------------------------------------------- homelite 240 IPL (HTM) http://www.barrettsmallengine.com/partslist/Homelite240-2.pdf Looks like a intake block #22. Choose by your UT number if needed. (HTM) http://www.barrettsmallengine.com/homelite/240chainsaw.html #Post#: 61002-------------------------------------------------- Re: Homelite 240 By: Eccentric Date: August 27, 2015, 7:18 pm --------------------------------------------------------- Yep. That model has a block that the carb mounts to. No boot. It's sort of an outgrowth of the XL/XL2/Super2 saws. Same basic design. Uses some of the same parts. More displacement. Carb's in a different location. Two bar studs/nuts rather than a single. Other minor differences. #Post#: 61009-------------------------------------------------- Re: Homelite 240 By: pete Date: August 28, 2015, 5:53 am --------------------------------------------------------- Thanks guys will have a look at this one now I know I am not hunting for parts cheers *****************************************************