(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Partner
*****************************************************
#Post#: 61802--------------------------------------------------
Source for Partner 500 / 5000 crankshaft seals?
By: jeff.lary Date: September 21, 2015, 7:37 am
---------------------------------------------------------
Hi guys I am still having issues with the 500 starting hard . It
is either the Metering lever set too high now,... or maybe
seals. I know they should present two different running
problems( Carb = flooding / seals = revving) but I am thinking
out loud here.
If the lever is too high and it may well be well that's an
easy fix. I set it with a Walbro tool so it should be ok but the
saw started hard this last weekend maybe 10 pulls again? Then
when I got her running I was waiting for it to warm up so I
could check the adjustment made to the carb but when I picked
the saw up and it tilted it immediately changed idle pitch. It
stalled out really so when I re-started it I tried turning it
left right and upside down and the running changed a little I
think? Although I may be just imagining problems as I am maybe
over thinking this some?
Now about 2 weeks ago I bought a 5000 that needs seals I know
that for sure that is why the guy sold it, and I was going to do
them this winter,.. most likely I still will. I was thinking I
should get 2 sets of seals while I am at it . The last time I
bought seals I got them from my old partner dealer. I was doing
bearings too at that time but now I am looking at just seals .
I am wondering if there is a source for seals elsewhere as well
as maybe a seal part number? Just incase I need to look
someplace else.
One other thing I have a road kill screwdriver I found and I
want to turn it into a homemade seal puller. Does anyone have a
picture of one they have made so I can see what I need to make
for a grove in the tip? Thanks for your help / advice Jeff
#Post#: 61812--------------------------------------------------
Re: Source for Partner 500 / 5000 crankshaft seals?
By: Chainsawrepair Date: September 21, 2015, 12:01 pm
---------------------------------------------------------
Should be common seal and bearings. I cant remember off hand.
But do remember they were common.
#Post#: 61814--------------------------------------------------
Re: Source for Partner 500 / 5000 crankshaft seals?
By: Chainsawrepair Date: September 21, 2015, 12:10 pm
---------------------------------------------------------
738220225 Crankshaft main bearing for Husqvarna chainsaws.
Husqvarna 39, 40, 45, 49, 50, 51, 55, 61, 66, 140 B, 143 B,
145BT, 153 R , 154, 155B, 155BT, 165, 254, 257, 261, 262, 266,
268, 272, 357, 359, 362, 365, 371, 372, 480, 575
Jonsered 2041, 2045, 2050, 2051, 2054, 2055, 2063, 2065,
2071, CS2171
Wasnt it a 6202?
seal 505275719 HUSQVARNA 357 359 346XP 362XP 365 . check I
cant remember but thinking took same seal both sides on 500
5000.
#Post#: 61816--------------------------------------------------
Re: Source for Partner 500 / 5000 crankshaft seals?
By: Chainsawrepair Date: September 21, 2015, 12:12 pm
---------------------------------------------------------
Go to Jacks small engines online. Run the poulan pro 325 for
parts. They will usually be cheaper under poulan name.
I forgot link
(HTM) http://www.jackssmallengines.com/
#Post#: 61824--------------------------------------------------
Re: Source for Partner 500 / 5000 crankshaft seals?
By: jeff.lary Date: September 21, 2015, 1:15 pm
---------------------------------------------------------
Ok I will thanks
*****************************************************