(DIR) Return Create A Forum - Home --------------------------------------------------------- Chainsaw Repair (HTM) https://chainsawrepair.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Partner ***************************************************** #Post#: 66284-------------------------------------------------- clutch sprocket By: The Ripper Date: December 13, 2015, 5:13 am --------------------------------------------------------- Anyone know where I can find a 8 tooth sprocket for my R16? It’s what came on the saw, also what method could one use to remove the clutch,this one dosen’t have a nut on the outside for removal. #Post#: 66293-------------------------------------------------- Re: clutch sprocket By: Chainsawrepair Date: December 13, 2015, 9:19 am --------------------------------------------------------- Looks like a older version of the 550 I had. I dont remember any thing different to removing the clutch on them. Lot of saws dont have built in nuts. Looks at the poulan and echo clutch tools to see if they fit. Then if not punch and hammer. (HTM) http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/4cbe316e73fff12588256afd00198a83?OpenDocument partner r16 ipl in the above link too. #Post#: 66294-------------------------------------------------- Re: clutch sprocket By: Chainsawrepair Date: December 13, 2015, 9:22 am --------------------------------------------------------- If you have the rim sprockets just buy a $3-$5 rim in 8T. If spur drum you need the whole thing. Showing this so you know what to look for. (HTM) http://store.chainsawr.com/products/partner-p70-p55-f55-f65-r16-chainsaw-clutch-rim-sprocket-drum-and-bearing (HTM) http://store.chainsawr.com/products/partner-r16-r17-chainsaw-rim-drum-clutch-assembly-type-1 #Post#: 66318-------------------------------------------------- Re: clutch sprocket By: The Ripper Date: December 13, 2015, 6:11 pm --------------------------------------------------------- no rims sprocket set up,may have to convert over for 8. will any of the rims 7 or 8 tooth fit the center drive? #Post#: 66320-------------------------------------------------- Re: clutch sprocket By: Chainsawrepair Date: December 13, 2015, 6:55 pm --------------------------------------------------------- yes #Post#: 66336-------------------------------------------------- Re: clutch sprocket By: The Ripper Date: December 14, 2015, 3:59 am --------------------------------------------------------- Thanks! found some 8’s *****************************************************