(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Partner
*****************************************************
#Post#: 67254--------------------------------------------------
INTERNAL RECOIL PLASTIC CUP AND SPRING PARTNER 5000
By: jeff.lary Date: December 27, 2015, 3:08 pm
---------------------------------------------------------
Hi I hope you all had a nice Christmas we did here in Maine. It
was 50* here and kids were playing outside in shorts .We had a
nice family day my son his wife and 3 children cam over to open
gifts and that was great it was very nice I hope you all had
something similar as well.
I bought a well used 5000+ from a dealer a while back ( June
?) and took her to the bench today. I basically took the saw
down to the point that I could change the recoil side crank
seal. I had a new one for the pto side as well but I have no way
to get the worm gear off, so for now I will hope she only needed
the one I could change.
I had heard the saw run before I bought it but it would not
stay running it revved and died and so on. The owner did not
want to mess any further with it so today I did the seal. I took
the jug off too and looked it all over cleaned the fins and put
that all back together as well as Gas Line, Carb Cleaning, gaped
the plug and tried her out.
After a few pulls I got it to run I think some tuning and it
will be fine but when it was running there was a tic and a snap
and I shut it off I could feel stray things going on inside the
recoil. I took the recoil off and it had broken 2 pieces of the
cup "edges" off where the spring goes.
I was wondering if some other saw uses the same cup / spring
assembly? Like a Husky 55 uses the same clutch sort of thing. I
may have some spare parts and be just fine but I don't have more
than one if I have any so I thought I might try to maybe by 2 or
3 new ones just in case. Jeff
#Post#: 67257--------------------------------------------------
Re: INTERNAL RECOIL PLASTIC CUP AND SPRING PARTNER 5000
By: Chainsawrepair Date: December 27, 2015, 3:21 pm
---------------------------------------------------------
500 5000 490 590 325 5500
[img width=600
height=450]
(HTM) http://cdn2.bigcommerce.com/server2000/52363/products/1167/images/5041/DSC08904__71331.1362772750.1280.1280.JPG?c=2[/img]
#Post#: 67258--------------------------------------------------
Re: INTERNAL RECOIL PLASTIC CUP AND SPRING PARTNER 5000
By: Chainsawrepair Date: December 27, 2015, 3:29 pm
---------------------------------------------------------
These folks are a member here
(HTM) http://www.sawagain.com/jonsered-490-590-recoil-starter-spring-505295126/
#Post#: 67265--------------------------------------------------
Re: INTERNAL RECOIL PLASTIC CUP AND SPRING PARTNER 5000
By: jeff.lary Date: December 27, 2015, 4:50 pm
---------------------------------------------------------
Thanks I was hoping you might see my post, I don't think mine
has the loops on it but it does have the small rectangle shape
on the outside like mine does. Maybe you just put it in and the
" loops" don't interfere with anything?
#Post#: 67267--------------------------------------------------
Re: INTERNAL RECOIL PLASTIC CUP AND SPRING PARTNER 5000
By: Chainsawrepair Date: December 27, 2015, 4:52 pm
---------------------------------------------------------
I dont remember been out of that series for a long time. I know
I ran both in mine. Maybe one was the update, I dont know.
#Post#: 67271--------------------------------------------------
Re: INTERNAL RECOIL PLASTIC CUP AND SPRING PARTNER 5000
By: jeff.lary Date: December 27, 2015, 4:56 pm
---------------------------------------------------------
Thanks I will write this info down and have it if I need it. I
will look through my parts and see if I have anything in better
shape.
#Post#: 67272--------------------------------------------------
Re: INTERNAL RECOIL PLASTIC CUP AND SPRING PARTNER 5000
By: Chainsawrepair Date: December 27, 2015, 5:13 pm
---------------------------------------------------------
There was 3 bolt and 4 bolt recoil covers. So it may be just a
newer update deal. Like I said. Just guessing.
#Post#: 67279--------------------------------------------------
Re: INTERNAL RECOIL PLASTIC CUP AND SPRING PARTNER 5000
By: jeff.lary Date: December 27, 2015, 7:13 pm
---------------------------------------------------------
well its a good thought
*****************************************************