(DIR) Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
 (HTM) https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
 (DIR) Return to: Homelite
       *****************************************************
       #Post#: 68411--------------------------------------------------
       Homelite 290 and 340 - 47 54 in Canada
       By: leec Date: January 19, 2016, 10:32 am
       ---------------------------------------------------------
       These saws are Solo inspired if not made. The 290 is 47cc and
       340 is 54cc .  I've had a 47 for a couple of years not used it
       much but always starts easily runs a .325 chain on a 13-14" bar.
       I've acquired 3 54 over the past year or so but not really
       spent much time with them.  Oddly it has the same carb as the
       smaller saw and probably would benefit from a larger one. These
       have different drive sprockets both spur and rim.  These would
       be very similar to the Solo 647 and 654, all have chain brakes
       and some part may still be available from Solo.
       #Post#: 68420--------------------------------------------------
       Re: Homelite 290 and 340 - 47 54 in Canada
       By: RoyM Date: January 19, 2016, 12:53 pm
       ---------------------------------------------------------
       They were in fact made by Solo. We had high hopes for the more
       modern design but they never really went anywhere which was
       probably a good thing because parts were difficult at best to
       obtain.
       #Post#: 68514--------------------------------------------------
       Re: Homelite 290 and 340 - 47 54 in Canada
       By: leec Date: January 24, 2016, 9:47 am
       ---------------------------------------------------------
       I have a couple of 54 which are 54cc saw but they have the same
       carb as the smaller 47 saw which look too small even for it.
       The carb off my Titan 57 (57cc) look to be twice the size in the
       venturi.  I'm wonding if that's why people seem not to like
       these 54 or 340 in the US.  Solo saws seem pretty good with
       these exceptions.
       *****************************************************