(DIR) Return Create A Forum - Home --------------------------------------------------------- Chainsaw Repair (HTM) https://chainsawrepair.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Solo ***************************************************** #Post#: 69664-------------------------------------------------- Solo 640 Later model By: kafka 66 Date: February 21, 2016, 6:57 am --------------------------------------------------------- I have a solo 640 that needs new fuel pipes and the carburretor rebuilding what size pipes do i need and what kit to get for the Carburretor THanks #Post#: 69666-------------------------------------------------- Re: solo 640 By: Chainsawrepair Date: February 21, 2016, 8:43 am --------------------------------------------------------- Have you pulled carb to check for you make and model? Have you checked your fuel lines and measured them or looked for markings? Have you looked at the solo 640 IPL? #Post#: 69667-------------------------------------------------- Re: solo 640 By: Chainsawrepair Date: February 21, 2016, 8:46 am --------------------------------------------------------- Here is a solo 640 IPL for you to use for part numbers. (HTM) http://s30387.gridserver.com/partsDiagrams/Solo%20640.pdf Shows 2 different make of carb and about 4 models. #Post#: 90639-------------------------------------------------- Re: Solo 640 Later model By: Chainsawrepair Date: May 25, 2024, 8:23 am --------------------------------------------------------- Solo 640 later model. They also used same model number on a early older metal one. Bet it make a nice light rear handle trim saw. I had the solo 637 NE one with same cc in top handle. Really liked the saw but seen the writing on the wall when solo was leaving US for parts supply. *****************************************************