(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: IPL and Service Manuals
*****************************************************
#Post#: 69693--------------------------------------------------
Husqvarna 335 XPT & 435-440 Workshop Manuals
By: farmboy Date: February 22, 2016, 5:10 pm
---------------------------------------------------------
Husky has totally revamped website. All I could find was Owners
Manual. Need both 335XPT & 435/440 WS manual. Replacing fuel
line in 335XPT. Do you have to take engine out of case ?? This
one has me stumped. Don't want to totally disassemble if I
don't have to.
Shep
#Post#: 69695--------------------------------------------------
Re: Husqvarna 335 XPT & 435-440 Workshop Manuals
By: Chainsawrepair Date: February 22, 2016, 5:50 pm
---------------------------------------------------------
Check email for 335XPT SM
I cant remember on lines on my 338's. :-[
#Post#: 69698--------------------------------------------------
Re: Husqvarna 335 XPT & 435-440 Workshop Manuals
By: 660magnum Date: February 22, 2016, 6:53 pm
---------------------------------------------------------
Look in email for 435/440 WSM
#Post#: 69699--------------------------------------------------
Re: Husqvarna 335 XPT & 435-440 Workshop Manuals
By: 660magnum Date: February 22, 2016, 7:11 pm
---------------------------------------------------------
The 435/440 are clamshell type strato charged engines
I have the IPL too if needed
#Post#: 69700--------------------------------------------------
Re: Husqvarna 335 XPT & 435-440 Workshop Manuals
By: 660magnum Date: February 22, 2016, 7:46 pm
---------------------------------------------------------
The Husqvarna USA website is somewhat confusing.
In spite of the label in the support section (Downloads) saying
"owners manuals", when you click on it, the IPL lists come up.
Workshop Manuals have to be found elsewhere.
#Post#: 69701--------------------------------------------------
Re: Husqvarna 335 XPT & 435-440 Workshop Manuals
By: farmboy Date: February 22, 2016, 8:51 pm
---------------------------------------------------------
Thanks guys. On the 335 it's what I was afraid of you have to
dang near dismantle it to change the fuel line. Thanks Jim I
have 435/440 IPL. The 435 is the one I posted about low comp.
93 psi. Nothing wrong w/piston, cyl. or ring. cyl. to case
screws were loose and missing.
Shep
Got ticked off and quit. For some reason It wouldn't load the
owners manual page. Will try it again Thank you.
#Post#: 69702--------------------------------------------------
Re: Husqvarna 335 XPT & 435-440 Workshop Manuals
By: 660magnum Date: February 22, 2016, 8:57 pm
---------------------------------------------------------
LMK if you want me to re-send it?
I can put it in a cloud and you can download from there if your
Email set up is flakey?
#Post#: 69703--------------------------------------------------
Re: Husqvarna 335 XPT & 435-440 Workshop Manuals
By: 660magnum Date: February 22, 2016, 9:03 pm
---------------------------------------------------------
Being as you work on two strokes all the time . . .
I may have already posted this?
Cut was working on a 272 that wouldn't run right but had good
static compression. It ran like low compression.
The ring had rounded edges at the PTO side transfer because of a
aftermarket cylinder.
*****************************************************