(DIR) Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
 (HTM) https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
 (DIR) Return to: Dolmar  Makita
       *****************************************************
       #Post#: 75331--------------------------------------------------
       Sachs Dolmar Identification
       By: Giles Date: January 5, 2017, 10:45 am
       ---------------------------------------------------------
       I have a SD on bench that I am rebuilding. The ID plate was all
       but destroyed by jumped chain and is unreadable.
       It is a 44mm bore (Closed Port) with two piston rings.
       How can I determine if it is a 111 or a 115?
       #Post#: 75333--------------------------------------------------
       Re: Sachs Dolmar Identification
       By: HolmenTree Date: January 5, 2017, 11:55 am
       ---------------------------------------------------------
       111 is 44mm bore. But your saw looks like a totally redesigned
       111 from the old one I'm looking at.
       #Post#: 75753--------------------------------------------------
       Re: Sachs Dolmar Identification
       By: 166 Date: January 27, 2017, 5:51 pm
       ---------------------------------------------------------
       Should be a 115 if closed port and 2 ring piston.
       *****************************************************