(DIR) Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
 (HTM) https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
 (DIR) Return to: Dolmar  Makita
       *****************************************************
       #Post#: 80601--------------------------------------------------
       Dolmar info
       By: Chainsawrepair Date: December 28, 2017, 10:04 am
       ---------------------------------------------------------
       Just saving some dolmar chainsaw info posted by cutting edge
       cuttinscott
       117,119,120 3.7 cu. in. 117 point ignition, 119 elec. ign, 120
       was a 119 with better carb.
       120super was a 4.1 cubic inch based off the 120 chassis
       116si 3.7 cubic inch with beefed up chassis, Injection start
       carb, and heavier duty chain brake band also improved ignition
       assy.
       120si 4.15 cubic inch shared chassis with 116si
       PS6000 replaced 116si with eco friendly oil pump improved chain
       brake and better fitting air filter cover
       PS6800 replaced 120si with shared chassis with PS6000
       123 was the same era as the 119/120 and was built from the 133
       chassis was soon replaced in the line up when the 120 super was
       introduced
       Today the PS6400-PS7900 have replaced these models
       The bar mount for the 112-PS6800 was the Windsor CJL / Oregon
       Z095,A095,K095
       The Bar Mount for the 123-166 was the Windsor / DM Oregon D033
       Todays PS6400-PS9010 use the Windsor EM / Oregon D009
       The PS9000 used the D033 mount
       Hope this helps with the History
       Scott
       
       #Post#: 80602--------------------------------------------------
       Re: Dolmar info
       By: 660magnum Date: December 28, 2017, 11:01 am
       ---------------------------------------------------------
       At one time Dolmar sold replacement bar studs that fit the
       PS6000/6800 with different shoulder diameters on them that fit
       K095, D009, and S25 bar mount types. So it is possible to come
       across a saw that fit one of these other bar mount types? Though
       the stud to stud spacing was for the K095!
       #Post#: 80603--------------------------------------------------
       Re: Dolmar info
       By: Chainsawrepair Date: December 28, 2017, 12:17 pm
       ---------------------------------------------------------
       Like that 9000 I had got in. We saw it had 2 different bar
       mounts on it too. One was D009
       *****************************************************