(DIR) Return Create A Forum - Home --------------------------------------------------------- Chainsaw Repair (HTM) https://chainsawrepair.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Chainsaws not listed - Gas OPE ***************************************************** #Post#: 86760-------------------------------------------------- Husqvarna 555FX clearing saw By: Cut4fun Date: June 9, 2020, 7:21 am --------------------------------------------------------- Dropped in for a quick tune. Husqvarna 555 FX. Not for weak or older folks for sure. I was amazed. He sold the stihl 450 I had just done and got this. (HTM) https://www.husqvarna.com/us/products/clearing-saws/555fx/966629102/?fbclid=IwAR2fJEiNbQ4R_Ixrzoyg9VG9PcndZQKIduDHSYLctgEhVJ80vUom-iyWuFc #Post#: 90696-------------------------------------------------- Re: Husqvarna 555FX clearing saw By: Chainsawrepair Date: July 2, 2024, 6:06 am --------------------------------------------------------- Only 2nd one of these across bench. This 2019 is acting weird after quick check over and dump old smelly mix. Put in some fresh E-free of mine to start. Even came in with carb kit. Hoping right one. #Post#: 90697-------------------------------------------------- Re: Husqvarna 555FX clearing saw By: Chainsawrepair Date: July 3, 2024, 1:00 pm --------------------------------------------------------- Carb rebuilt and checked. Still same zooming happening. Told owner I didnt think it was carb kit issue from get go. But carb diaphragms were getting iffy. Plus got to put in a tan over that blue oem one on check side. After troubleshooting came back to the cable on engine side to carb. Dealer said he just replaces the whole cable as common issue he sees. I was able to remove rubber boot and lube inside best I could put boot back on and work it some and got it working. So good to go and even tested out in some weeds. OEM walbro kit and they punched pump side diaphragm wrong. Luckily dont matter on this one and will still work. Also the OEM Walbro carb made in China. Told folks for years they had a plant there too. ;) #Post#: 90698-------------------------------------------------- Re: Husqvarna 555FX clearing saw By: Chainsawrepair Date: July 5, 2024, 7:48 am --------------------------------------------------------- Throttle cable and wiring harness if ever needed later. Has to all be installed together. ::) *****************************************************