(DIR) Return Create A Forum - Home --------------------------------------------------------- Chainsaw Repair (HTM) https://chainsawrepair.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Chain - Bars - Grinders - Filing ***************************************************** #Post#: 89941-------------------------------------------------- Oregon NOS old bars By: Cut4fun Date: March 29, 2023, 6:51 am --------------------------------------------------------- Anyone have info on these old NIB bars? 4 of them NIB. Trying to help a guy that found them on my CR group FB. I'd never seen such before or what mount etc they are. #Post#: 89942-------------------------------------------------- Re: Oregin NOS old bars By: ray benson Date: March 29, 2023, 8:40 am --------------------------------------------------------- I don't have an old catalog to track down the number. Only have 1969 and 1982 catalogs. Believe it is an early 1970's bar. Found this on ebay "This is a 15" Oregon 3/8 Chain Saw Guide bar . It is HARD stamped with Oregon Part Numbers 23469- 3/8 23471-404 1558 1888SC. It is a brand new bar . Somebody has wrote on it "158RND H010 3/8-.058"" #Post#: 89943-------------------------------------------------- Re: Oregin NOS old bars By: Chainsawrepair Date: March 29, 2023, 8:52 am --------------------------------------------------------- [quote author=ray benson link=topic=7952.msg89942#msg89942 date=1680097226] I don't have an old catalog to track down the number. Only have 1969 and 1982 catalogs. Believe it is an early 1970's bar. Found this on ebay "This is a 15" Oregon 3/8 Chain Saw Guide bar . It is HARD stamped with Oregon Part Numbers 23469- 3/8 23471-404 1558 1888SC. It is a brand new bar . Somebody has wrote on it "158RND H010 3/8-.058"" [/quote] Thanks for researching. 8) Bars isnt something I can figure out most times on the older stuff. #Post#: 89944-------------------------------------------------- Re: Oregin NOS old bars By: ray benson Date: March 29, 2023, 9:16 am --------------------------------------------------------- Would be nice to find a mid 1970's oregon bar application guide. #Post#: 90400-------------------------------------------------- Re: Oregon NOS old bars By: old 040 Date: December 30, 2023, 8:05 am --------------------------------------------------------- I know this old, but I found that bar number listed in my 1979 Oregon application guide. It's shows that bar fitting the Partner R16 through R35 and being a 15" bar, .058 gauge, and 3/8 pitch. *****************************************************