(DIR) Return Create A Forum - Home
       ---------------------------------------------------------
       Jason Moyle Racing
 (HTM) https://jasonmoyleracing.createaforum.com
       ---------------------------------------------------------
       *****************************************************
 (DIR) Return to: ROLLING ROAD & ENGINE DYNO RESULTS
       *****************************************************
       #Post#: 1286--------------------------------------------------
       sparrow's 9A 16v turbo plots
       By: sparrow Date: November 11, 2013, 8:25 am
       ---------------------------------------------------------
       From nearly 5 years ago, before I redesigned the front end on
       some armco at the Ring:
       [IMG]
 (HTM) http://i65.photobucket.com/albums/h230/sparrowdclxvi/Blue%20Mk2/16VTurbo-Torque.jpg[/img]
       [IMG]
 (HTM) http://i65.photobucket.com/albums/h230/sparrowdclxvi/Blue%20Mk2/16VTurbo-Power.jpg[/img]
       Max boost around 1.3 bar.
       Been slowly rebuilding the car over the last couple of years,
       around two babies and a new business. Should be out again in the
       car next year.
       #Post#: 1291--------------------------------------------------
       Re: sparrow's 9A 16v turbo plots
       By: JMR Date: November 11, 2013, 12:16 pm
       ---------------------------------------------------------
       Cool!....was this the white MK2?
       #Post#: 1292--------------------------------------------------
       Re: sparrow's 9A 16v turbo plots
       By: sparrow Date: November 11, 2013, 2:06 pm
       ---------------------------------------------------------
       No, it was blue before the crash, now yellow.
       Before:
       [IMG]
 (HTM) http://i65.photobucket.com/albums/h230/sparrowdclxvi/Blue%20Mk2/IMG_2187.jpg[/img]
       Current:
       [IMG]
 (HTM) http://i65.photobucket.com/albums/h230/sparrowdclxvi/Blue%20Mk2/IMAG01731_zpse766cad5.jpg[/img]
       #Post#: 1404--------------------------------------------------
       Re: sparrow's 9A 16v turbo plots
       By: Smudge Date: December 9, 2013, 4:37 pm
       ---------------------------------------------------------
       Look forward to seeing this on track, I have never seen it out
       before.
       #Post#: 1433--------------------------------------------------
       Re: sparrow's 9A 16v turbo plots
       By: GollumFreeZone Date: December 13, 2013, 1:54 pm
       ---------------------------------------------------------
       Looks great. What's left to do on it?
       #Post#: 1443--------------------------------------------------
       Re: sparrow's 9A 16v turbo plots
       By: sparrow Date: December 16, 2013, 3:12 pm
       ---------------------------------------------------------
       Thanks.
       As of today, I need to do the following:
       [list]
       [li]Fit drive shafts.[/li]
       [li]Solder the broken horn wire.[/li]
       [li]Fit front strut brace.[/li]
       [li]Tidy engine bay wiring and fit scuttle cover[/li]
       [li]Fix fresh air blower. Suspect dodgy switch, but could be
       because I've butchered the loom[/li]
       [li]Fit old front brake pads[/li]
       [li]Order rear calipers, and fit.[/li]
       [li]Bleed brakes.[/li]
       [/list]
       I'll pick up the rear calipers this week, and finish the list
       above over the Christmas holidays.
       Nice to at some point list:
       [list]
       [li]Sort fuel level gauge/sender.[/li]
       [li]Fit solid steering rack mount.[/li]
       [li]Swap rear beam[/li]
       [li]Order and fit front brake pads. Discs are nearly new.[/li]
       [li]Add eye for new 5 point harness on drivers side.[/li]
       [li]Sort out electric cut out switch wiring[/li]
       [li]Fix dent from where wheel fell on the car, as well as a few
       other nicks. I may have tried to fit the car in the garage with
       a door open.[/li]
       [li]Create new cover for fuel pumps/lines where they are in the
       car. I'm not a fan of having those exposed when I'm in the
       car.[/li]
       [li]Move oil cooler from in front of radiator. Coolant temp is
       too high, oil temp is fine. Fortunately I've found the original
       pipes from when it was behind the rad. Gives me some
       options.[/li]
       [li]Replace fuel fillers. The current ones are for fast fill
       jerry cans used in endurance racing. PITA at petrol
       stations.[/li]
       [li]Redo the in car fuel lines in teflon fuel hose. Should
       lessen the fuel smell, as they are supposedly better than the
       rubber hoses I have now. Plus I keep stabbing myself on mine as
       they're old and frayed.[/li][/list]
       #Post#: 1457--------------------------------------------------
       Re: sparrow's 9A 16v turbo plots
       By: GollumFreeZone Date: December 18, 2013, 1:54 pm
       ---------------------------------------------------------
       Sounds like a good target - better than watching Xmas TV too :D
       *****************************************************