(DIR) Return Create A Forum - Home
       ---------------------------------------------------------
       Lionel Trains
 (HTM) https://lioneltrains.createaforum.com
       ---------------------------------------------------------
       *****************************************************
 (DIR) Return to: Beginners Q & A
       *****************************************************
       #Post#: 509--------------------------------------------------
       Attaching Fastrack to layout table
       By: bdeditch Date: January 10, 2014, 12:51 pm
       ---------------------------------------------------------
       Newbie as well, I am going to be building a table but I cannot
       find anything that shows or explains how to attach the track to
       wood. I see the small holes, but are nails only suppose to be
       used? I have also seen some articles on using foam to lay under
       the track to dampen the noise. Any and all help would be great.
       #Post#: 510--------------------------------------------------
       Re: Attaching Fastrack to layout table
       By: djacobsen Date: January 10, 2014, 5:09 pm
       ---------------------------------------------------------
       bdeditch,
       Hello & Welcome to the Forum!
       You can use either a small nail or a #4 screw to attach your
       track to your layout, using the holes that are pre-drilled in
       the track.
       Pink or blue extruded foam has been used on layouts to deaden
       the fastrack noise, but some other form of fastening must be
       used.
       I have heard of folks using clear silicone sealant/caulking to
       attach the track to the foam.
       Lay out with a pen/marker where the track will be placed, lay
       down a line or two of silicone, then pin the track in place
       until the silicone sets.
       After the silicone sets,  remove the pins.
       Happy Rails.
       Dave
       *****************************************************