(DIR) Return Create A Forum - Home
       ---------------------------------------------------------
       Lionel Trains
 (HTM) https://lioneltrains.createaforum.com
       ---------------------------------------------------------
       *****************************************************
 (DIR) Return to: Lionel Maintenance & Repair
       *****************************************************
       #Post#: 1005--------------------------------------------------
       Electric Generator Car 3530
       By: steina01 Date: February 6, 2015, 12:38 pm
       ---------------------------------------------------------
       Hi,
       I am restoring a Lionel 3530 Electric Generator car.  There is a
       short at the roller pickup which I can't find.  I wonder if a
       piece of insulation is missing or if the roller assembly is too
       loose.
       Can someone who had a working example of this car send me a good
       photo of the roller area?
       Thanks,
       Alan
       alansteinfeld@verizon.net
       #Post#: 1006--------------------------------------------------
       Re: Electric Generator Car 3530
       By: TrainLarry Date: February 6, 2015, 7:41 pm
       ---------------------------------------------------------
       Welcome to the forum!
       Make sure the solder tab and wire on the roller assembly does
       not touch the top of the truck frame when the roller is
       depressed. There is very little clearance in this area when the
       roller is depressed, and it is easy for the wire to short to the
       frame. Put a piece of electrical tape on the truck frame above
       the roller pickup assembly if in doubt.
       If this does not solve the problem, disconnect the power wire
       from the roller where it connects to the mechanism inside the
       car, to isolate the roller from the mechanism. If the short
       remains, there is a problem with the roller and wiring as stated
       above. If the short is now gone, the problem may be a short in
       the mechanism somewhere. Visually trace the wiring, and replace
       any old, cracked wire.
       If you have any other powered car, whether lighted or operating,
       the roller pickup assemblies on similar type trucks are pretty
       much the same.
       Larry
       #Post#: 1008--------------------------------------------------
       Re: Electric Generator Car 3530
       By: steina01 Date: February 7, 2015, 6:37 am
       ---------------------------------------------------------
       Thanks for the help Larry.  I will give it a try.
       Alan
       *****************************************************