(DIR) Return Create A Forum - Home --------------------------------------------------------- Lionel Trains (HTM) https://lioneltrains.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Beginners Q & A ***************************************************** #Post#: 1249-------------------------------------------------- Newbie interior lighting problem By: jastewart Date: January 13, 2016, 1:47 pm --------------------------------------------------------- I jus got a starter set, Penn Flyer 6-30233, and have a basic question. I tried several forum searches with no results. The caboose is supposed to be illuminated--the interior, I assume. It doesn't light up. The manual suggests checking the bulb but doesn't say how to do that. Do I just unscrew the small Phillips screws in the base and take it apart? I'm afraid I'll screw something up. Thanks for any help. #Post#: 1280-------------------------------------------------- Re: Newbie interior lighting problem By: pjdog350 Date: March 20, 2016, 12:01 pm --------------------------------------------------------- I had a light go out in one of my passenger cars. It has two bulbs but one had failed. I did what you said. I removed the phillips screws at each end of the car and the top came off. The car took a special light bulb that I was able to find on EBay. Good luck! jack *****************************************************