(DIR) Return Create A Forum - Home --------------------------------------------------------- Lionel Trains (HTM) https://lioneltrains.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Lionel Maintenance & Repair ***************************************************** #Post#: 1549-------------------------------------------------- Lionel ZW transformer works great except one of the lights By: mtfrizzell Date: April 23, 2017, 7:24 pm --------------------------------------------------------- I am refurbishing a used ZW transformer. It had a bad cord, one bad ground terminal and no light bulbs. I replaced all the bad components and tested the functionality. All throttle and voltage controls work as expected including whistle and direction. The only issue is that the red bulb (left side) does not light. Swapping the bulbs proves both bulbs are good. I do not see any bare, shorted or open wires. Does anyone have suggestions as to what might be amiss. Thanks, Mike [IMG] (HTM) https://uploads.tapatalk-cdn.com/20170424/d854ea9e017793faf72d1e8ec26bbccf.jpg[/img][IMG]https://uploads.tapatalk-cdn.com/20170424/0d2563825a422cd8e10356c9b6f70c36.jpg[/img][IMG]https://uploads.tapatalk-cdn.com/20170424/2e9f08639c3b685d863e67518f43c509.jpg[/img][IMG]https://uploads.tapatalk-cdn.com/20170424/d854ea9e017793faf72d1e8ec26bbccf.jpg[/img][IMG]https://uploads.tapatalk-cdn.com/20170424/0d2563825a422cd8e10356c9b6f70c36.jpg[/img] Sent from my iPad using Tapatalk #Post#: 1550-------------------------------------------------- Re: Lionel ZW transformer works great except one of the lights By: sllove1947@hotmail.com Date: April 24, 2017, 12:57 pm --------------------------------------------------------- The red light should be off, it's the circuit breaker light. If it does light you have a short circuit on your layout, possible train off the the track or something laying on the track. Steve (HTM) https://sllove1947.wixsite.com/stevestrainrepair #Post#: 1553-------------------------------------------------- Re: Lionel ZW transformer works great except one of the lights By: mtfrizzell Date: April 24, 2017, 2:03 pm --------------------------------------------------------- [quote author=sllove1947@hotmail.com link=topic=651.msg1550#msg1550 date=1493056653] The red light should be off, it's the circuit breaker light. If it does light you have a short circuit on your layout, possible train off the the track or something laying on the track. Steve (HTM) https://sllove1947.wixsite.com/stevestrainrepair [/quote] Interesting as nothing is joked up to the terminals. Sent from my iPhone using Tapatalk #Post#: 1556-------------------------------------------------- Re: Lionel ZW transformer works great except one of the lights By: mtfrizzell Date: April 27, 2017, 6:10 pm --------------------------------------------------------- When I deliberately short a terminal to ground the red light does not come on. Concerned. Sent from my iPhone using Tapatalk #Post#: 1559-------------------------------------------------- Re: Lionel ZW transformer works great except one of the lights By: TrainLarry Date: May 1, 2017, 1:40 pm --------------------------------------------------------- The red light will not come on until the circuit breaker trips. If the breaker trips and the lamp does not light, then you probably have a wiring issue. Larry #Post#: 1695-------------------------------------------------- Re: Lionel ZW transformer works great except one of the lights By: 70gtvert Date: November 21, 2017, 1:27 pm --------------------------------------------------------- If you have not found your problem, I may have. I have (had) the same issue. I thought it was the circuit breaker, I have a new one on order. But in the mean time I found this: (HTM) http://www.agtta.com/Tech-Tips/Tech-tip-ZW-repairs3.pdf Check out page 3. It talks about a bad resister wire. I did what they suggested, swapping out a 14 volt (I had no 18v bulbs) and running a jumper wire where the resister wire is at. All of a sudden my red light worked when I shorted out the system. I'm still putting in the modern circuit breaker when it gets here as I felt it took a little long before it tripped, but it did trip and it did light up the red light. Now I have to find 18v lights with the little globe as the ones I have are too big to fit in the red light dome. #Post#: 1698-------------------------------------------------- Re: Lionel ZW transformer works great except one of the lights By: TrainLarry Date: November 21, 2017, 9:21 pm --------------------------------------------------------- The 18 volt bulbs with the small globe (G3-1/2) are #1445 and available from The Train Tender. (HTM) http://www.ttender.com/partslist.html (HTM) http://www.ttender.com/partslist.html Larry *****************************************************