(DIR) Return Create A Forum - Home --------------------------------------------------------- Lionel Trains (HTM) https://lioneltrains.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Lionel Maintenance & Repair ***************************************************** #Post#: 2278-------------------------------------------------- Coupler attachment to baseplate By: njjrjohn Date: January 2, 2020, 5:47 pm --------------------------------------------------------- Is it possible to reattach a coupler to the baseplate? What type of pin would be used to do this? #Post#: 2279-------------------------------------------------- Re: Coupler attachment to baseplate By: TrainLarry Date: January 2, 2020, 6:08 pm --------------------------------------------------------- Once a coupler assembly comes loose from the baseplate, it needs to be replaced. The new coupler assembly has a nib on the bottom which gets peened over to keep it in place. The easiest thing to do is to replace the complete baseplate assembly. What is the stock number of the rolling stock in question? Larry #Post#: 2280-------------------------------------------------- Re: Coupler attachment to baseplate By: njjrjohn Date: January 2, 2020, 7:05 pm --------------------------------------------------------- Thanks Larry! Th3e stock number for the car is 36621; milk car. #Post#: 2281-------------------------------------------------- Re: Coupler attachment to baseplate By: njjrjohn Date: January 2, 2020, 7:13 pm --------------------------------------------------------- Hi, Also, I have a Breakman's Riviter set with a Knuckle Coupler Riviting Tip, a Shoe/Armature Spring Tip and a BR-1 Marking Tip. Would any of that be usable for penning in a new rivet? #Post#: 2282-------------------------------------------------- Re: Coupler attachment to baseplate By: TrainLarry Date: January 2, 2020, 7:53 pm --------------------------------------------------------- The tool set you have should do the job, but it would be easier to just replace the entire baseplate assembly. (HTM) https://store.justtrains.com/483-2-Base-Plate-Coupler-Slide-Shoe_p_1603.html Larry *****************************************************