(DIR) Return Create A Forum - Home
---------------------------------------------------------
Malaysia GSM Forum
(HTM) https://malaysiagsmforum.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: BB5 Easy Service Tool (BEST) Nokia Dongle
*****************************************************
#Post#: 216--------------------------------------------------
UPDATES and NEWS
By: Nizda Mobile Date: November 28, 2011, 7:33 am
---------------------------------------------------------
BEST Ver. 1.08.1 uploaded on support area.
- USB flashing improoved [list]
[li]Fixed bug in S60 usb flashing (like E71) [/li]
[li]Fixed bug in old S40 usb flashing (like 6085) [/li]
[/list]- INI file updated (adeded new model)
BEST Ver. 1.08 uploaded on support area.
- USB flashing improoved [list]
[li]Updated flashloaders [/li]
[li]Improoved RAPUYAMA/Rap3gV4/Broadcomm flashing [/li]
[li]Improoved N96 flashing [/li]
[li]Improoved S60 RAPIDO flashing [/li]
[li]Improoved old S40 boot/flashing [/li]
[li]Improoved S40 dead mode cntent writing especialy for old
models [/li]
[li]Improoved AfterFlash operations [/li]
[li]Added Certificate (NPC/CCC/HWC) backup in USB normal/Dead
flashing [/li]
[li]Some cosmetic changes and bugfixes [/li]
[/list]- UFS support added [list]
[li]All service operations are supported [/li]
[li]All user data operations are supported [/li]
[/list]- RPL read added for new BB5 [list]
[li]Also can be used for dead-to-test mode without need select
flash-files [/li]
[/list]- User Data operations improoved [list]
[li]S60 Symbian 9.3/9.4 phonebook write activated for some
special cases [/li]
[li]DCT4+ gallery/SMS read improoved [/li]
[/list]- Service operations improoved [list]
[li]E-series code reading improoved [/li]
[li]FunLabel improoved [/li]
[li]SelfTest improoved (especialy for new phones) [/li]
[li]Improoved and rebuilded connection for DCT4+/Infineon/WD2
phones [/li]
[/list]
#Post#: 217--------------------------------------------------
Re: UPDATES and NEWS
By: Nizda Mobile Date: November 28, 2011, 7:34 am
---------------------------------------------------------
BEST Ver. 1.08.1 uploaded on support area.
- USB flashing improoved [list]
[li]Fixed bug in S60 usb flashing (like E71) [/li]
[li]Fixed bug in old S40 usb flashing (like 6085) [/li]
[/list]- INI file updated (adeded new model)
#Post#: 218--------------------------------------------------
Re: UPDATES and NEWS
By: Nizda Mobile Date: November 28, 2011, 7:34 am
---------------------------------------------------------
BEST Ver. 1.09
[list]
[li]USB flashing iproved [list]
[li]Certificate Write/Erase added for RAPUYAMA, BroadComm,
RAP3Gv4 [/li]
[li]Blank pmm write activated via USB [/li]
[li]Some bugfixes [/li]
[li]Loaders updated [/li]
[/list] [/li]
[li]UFS support [list]
[li]UFS communication improved [/li]
[li]"Check" option added [/li]
[li]Flashing added (CMT/APE) Old Protocol [/li]
[li]Cert Write/Read/Erase added [/li]
[/list] [/li]
[li]User Data operations improved [list]
[li]MMC password reading improved [/li]
[li]WD2 PhoneBook operations improved [/li]
[li]Read "To Do", "Notes" For S40 added [/li]
[li]Read Calendar / Write Calendar - Select "evpkg" instead
"event" [/li]
[li]Added Write PhoneBook support for RAPUYAMA, BroadComm,
RAP3Gv4 Series 40 phones [/li]
[li]Fbus gallery reading improved [/li]
[/list] [/li]
[li]Repair options [list]
[li]Camera configuration read/repair (USB) [/li]
[li]Read RPL now collect Certs and Flex keys [/li]
[li]Erase Flash - S40 special - erase FS (USB/UFS) [/li]
[li]RPL write improved ( NMP/Plain type support ) [/li]
[li]WD2 connection improved, Added "Force D2 mode" [/li]
[/list][/li]
[/list]
#Post#: 219--------------------------------------------------
Re: UPDATES and NEWS
By: Nizda Mobile Date: November 28, 2011, 7:35 am
---------------------------------------------------------
BEST v1.10.1 uploaded to Support Area.
What new :
v1.10 [list]
[li]USB flashing improved [/li]
[li]- Loaders Updated [/li]
[li]- CNT write for 7500 fixed [/li]
[li]- Some bugFixes [/li]
[li]UFS support improved [/li]
[li]- Flashing improved [/li]
[li]- Cert read/Write improved [/li]
[li]- Content Write improved [/li]
[li]- some bugfixes and stability improvements [/li]
[li]User Data operation Improved [/li]
[li]- SMS reading improved via Fbus [/li]
[li]- Gallery backup improved via Fbus [/li]
[li]Unlock/Repair [/li]
[li]- SL1/SL2 Unlock Added ( Rap3Gv3, Rap3Gv2 and old RAPIDO
hashes now) [/li]
[li]Other [/li]
[li]- Language Package Description added for S40 [/li]
[li]No need any ini-files or something else [/li]
[li]Work for all current and upcoming s40 models [/li]
[li]- Product Code write allow write "Word" Product codes [/li]
[li]- Flash Settings added [/li]
[li]Alow by "one select" configuring flashing options [/li]
[li]Modes : Safe flash, Full Flash, PPm only, Dead-Test, Manual
[/li]
[li]- CERT operations, Low Format via USB - no need more check
"Dead mode" [/li]
[li]- AfterFlash - Product Code update added [/li]
[li]- S40 Low Format - Added 2700c (RM-561), 7500 (RM-249)
[/li]
[li]- some bugfixes and cosmetic changes from previous version
[/li]
[/list]
v1.10.1
[list]
[li]UFS flashing improved [/li]
[li]S40 PhoneBook reading improved [/li]
[li]Log reading added (allow use logs via usb too for future
purposes ) [/li]
[li]FlashSetting improved [/li]
[li]Ini updated [/li]
[li]Some minor bugfixes [/li]
[/list]
#Post#: 220--------------------------------------------------
Re: UPDATES and NEWS
By: Nizda Mobile Date: November 28, 2011, 7:35 am
---------------------------------------------------------
BEST v1.12 uploaded to Support Area.
What new : [list]
[li]Unlock/Repair [/li]
[li]- adedd stendalone SDD Repair [/li]
[li]- adedd stendalone SX4 Auth [/li]
[li]Other [/li]
[li]Some minor bugfixes [/li]
[/list]
Happy NEW YEAR !!!
#Post#: 221--------------------------------------------------
Re: UPDATES and NEWS
By: Nizda Mobile Date: November 28, 2011, 7:36 am
---------------------------------------------------------
BB5 Easy Service Tool [BEST] v1.13 released:
- SL3 unlock codes calculation released in FREE, UNLIMITED,
STANDALONE method (use your own PC for calculation)
* FREE, UNLIMITED, STANDALONE for all Infinity BB5 Easy Service
Tool [BEST] users
* You must have PC with required hardware for calculation, see
hardware requirements below
- Nokia Infineon CPU based (X-Gold 102/110) models supported
* SP-Unlock (Network/Provider unlock) via FREE, UNLIMITED,
STANDALONE unlock method (use your own PC for calculation) 1-st
In Word
-- FREE, UNLIMITED, STANDALONE for all Infinity BB5 Easy Service
Tool [BEST] users
-- 1280, 1616, 1800 models was tested and unlocked well
-- You must have PC with required hardware for calculation, see
hardware requirements below
* UFS interface supported
* Flashing: dead mode, normal mode, upgrade and/or downgrade
firmware
* Service functions: factory defaults, pm read/write, self-test
- User Data operations improved
* S40 PhoneBook operation improved, read operation improved
* CSV read operation improved, minor bugs fixed
* S40v6 phonebook reading improved
* S60 CSV/VCF operation improved
- Support area improvements
* Support area mirror servers selection released, new support
mirror servers will be started soon
- UFS flasing improved
* minor bugs fixed
- Other improvements
* DCT4+ and Infineon based models: reset user code operation
fixed
* New Camera Configuration supported
-- NI00CS0000040C213402
-- NI00CS00000401022E05
* RPL read operations improved, especially for dead-to-test mode
* Ini files updated, new models added
* minor bugs fixed
- Hardware requirements for unlock calculation:
* ATI Radeon HD 5xxx or Nvidia CUDA graphic card
#Post#: 222--------------------------------------------------
Re: UPDATES and NEWS
By: Nizda Mobile Date: November 28, 2011, 7:36 am
---------------------------------------------------------
BEST
Ver. 1.14
- Added standalone Sl1/Sl2 simlock repair
- Improved Infineon Unlock ( C1-00 supported/tested )
- Added S40 (all generations : 2,3,5,6) SMS/MMS
reading/Restoring !!! Unique
SMS/MMS can be readed as text, or a backup package and restored
after flash/reset/erase
Supported USB for now only, in next versions will be added FBUS
support too
- Fixed some model detection/operation select bugs for BB5
(repair/unlock not enabled)
- USB flashing fixed
- UFS support improved
- fixed sw version check
- other small bugfixes
- Nokia Infineon support improved
- Infineon flashing improved
- Infineon "check" improved
- After flash options added (chk/read, FactorySet)
- Some improvements in phone connection/detection
- Added some hints for flashing/booting/unlocking problems
- "Check" option improved for BB5 (USB/FBUS)
- Some cosmetic changes
#Post#: 223--------------------------------------------------
Re: UPDATES and NEWS
By: Nizda Mobile Date: November 28, 2011, 7:37 am
---------------------------------------------------------
BEST v 1.14.1
- Improved Infineon support
- Added COM port flashing support (dead/normal)
- Added Info Read option Infineon/Dct4
- Some improvements
- USB Flash Loaders updated
- Some internal bugfixes
- Ini updated - revised and added new models
- LBF log reading for SL3 fixed
#Post#: 224--------------------------------------------------
Re: UPDATES and NEWS
By: Nizda Mobile Date: November 28, 2011, 7:37 am
---------------------------------------------------------
BEST v1.15
- Added Infineon XG213 support c1-01, c1-02 and same [list]
[li]USB flashing (Dead/Normal)
Allow Custom flashing too (only mcu, only ppm, only cnt) [/li]
[li]Dead To Test [/li]
[li]Service operations (all, except rpl read/write, ask
reading) [/li]
[li]UserData operations [list]
[li]PhoneBook Read/Write (cross-support for all S40) [/li]
[li]Calendar Read/Write [/li]
[li]SMS Read/Write [/li]
[li]Gallery read [/li]
[li]MMC Pass read [/li]
[/list] [/li]
[li]Other [list]
[li]FunLabel supported too [/li]
[li]LifeTimer supported too [/li]
[/list][/li]
[/list]- USB flashing Improved [list]
[li]CNT check fixed (8800arte bug) [/li]
[li]CNT check in dead mode improved
no more errors with 3110/6300 and same [/li]
[li]some improvements in flashing at all [/li]
[/list]- UFS flashing improved [list]
[li]Fixed MMC CNT flashing(6500c/7900/8800) [/li]
[li]Improved stability [/li]
[/list]- Service operations improved [list]
[li]Camera Configuration read/write also supported new
CamTypes (x3-02 and same)
New camconfigs added [/li]
[li]LifeTimer operations improved [/li]
[li]Some improvements at all [/li]
[/list]- UserData operations improved [list]
[li]Added PhoneBook Read/Write support for S40 T&T
(X3-02,C3-01...) [/li]
[li]Fixed PhoneBook reading for some s40 (c3 and same) [/li]
[li]Improved Gallery backup for new S40 (Infineon213 & s40 T&T)
[/li]
[/list]- Ini Updated (added and fixed some models)
- Loaders updated (Fbus/Usb)
- Added CNT check option (for on/off Content check in Dead USB
flashing)
- Some cosmethic changes
Some important info:
Infineon 213 [list]
[li]MCU+PPM flashing doesn't kill user data [/li]
[li]For dead (full state) - flashing, if device is not
recognized (unknow device in Windows) - need reinsert battery,
when cable inserted [/li]
[li]For dead-to-test need select Dead-to-test (In FlashSettings
tab) [/li]
[li]Flashing tested on C1-01 and C1-02 (RM-607, RM-643) [/li]
[li]Cross-Flashing from models - Kill Imei and Locks. Reflash
back fix it [/li]
[/list]
#Post#: 225--------------------------------------------------
Re: UPDATES and NEWS
By: Nizda Mobile Date: November 28, 2011, 7:37 am
---------------------------------------------------------
BEST v1.16
- RPL writing rebuilded [list]
[li]Added PA_SL30 Simlock Writing (Under TEST)
Support Factory RPL and BEST RPL backup [/li]
[li]some bug fixes and improvements [/li]
[/list]- DCT4 support improved [list]
[li]Added Standalone DCT4+ ASIC11 Unlock/Relock/Simlock repair
[/li]
[/list]- Other [list]
[li]Unlock counter reset added [/li]
[li]UFS flashing stability improved [/li]
[/list]- Some improvements at all
- Ini updated and corrected for some models
- Some cosmetic changes
Discussion thread is here: BEST v1.16 Standalone
Unlock/Relock/SimLock Repair for DCT4+ ASIC11
(HTM) http://forum.gsmhosting.com/vbb/f641/best-v1-16-standalone-unlock-relock-simlock-repair-dct4-asic11-1209115/
*****************************************************
(DIR) Next Page