(DIR) Return Create A Forum - Home --------------------------------------------------------- Office of Steam Forum for Model &amp ;amp;amp;amp;amp;amp; Toy Steam Gas &amp ;amp;amp;amp;amp;amp;amp; Hot Air Engines (HTM) https://officeofsteamforum.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: General Discussion - Dynamos, Generators, Alternato... ***************************************************** #Post#: 17711-------------------------------------------------- Re: Austria Generator By: Nick Date: November 30, 2019, 6:28 pm --------------------------------------------------------- [quote author=classixs link=topic=1811.msg17607#msg17607 date=1575016319] Works very well Carl, thanks for sharing ! Only downside to the lamppost version (at least on my old one here), is that the bulb isn´t screwed in there as on a Jensen 15, but soldered directly onto the wires, which makes it a bit more complicated to change it. From own experience, i´d say that one would be well advised, to consider current rpm before engaging the generator 8) [/quote] I had thought mine was screwed in... tried unscrewing it, which I was able to do, to an extent... then it became hard to turn and felt like wires binding/twisting up inside. Was it soldered onto the wires and then screwed in? #Post#: 19012-------------------------------------------------- Re: Austria Generator By: SteamerJ Date: December 30, 2019, 11:10 am --------------------------------------------------------- I bought two of those a few years ago and I’m very happy with them. I forgot about the bulb being soldered to the wires. If I recall I think I modified mine to take a screw-in. I tend to crank them up and go through a lot of bulbs. ***************************************************** (DIR) Previous Page (DIR) Next Page