(DIR) Return Create A Forum - Home --------------------------------------------------------- Office of Steam Forum for Model &amp ;amp;amp;amp;amp;amp; Toy Steam Gas &amp ;amp;amp;amp;amp;amp;amp; Hot Air Engines (HTM) https://officeofsteamforum.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Boats, Pond Yachts ***************************************************** #Post#: 3187-------------------------------------------------- BOWMAN AEROBOAT 1 By: Tony Bird Date: March 20, 2019, 7:37 am --------------------------------------------------------- Hi, A friend has recently bought a Bowman Aeroboar 1 which is a rubber powered launch 32" long and I am going to try and make a copy of it. First a drawing was made from templates taken from the hull. [attachimg=2] After the hull sides were cut they were bent to shape using weights (bricks) after having been steamed. [attachimg=3] The frame spacer and transom were made. [attachimg=4] I am not very good with computers so this is a bit of a try-out for me using a new system. If I have got things correct I will continue later. Regards Tony. #Post#: 3188-------------------------------------------------- Re: BOWMAN AEROBOAT 1 By: Tony Bird Date: March 20, 2019, 7:38 am --------------------------------------------------------- Hi, I will have to do a bit of work on attachments. Bear with me. Regards Tony. #Post#: 3216-------------------------------------------------- Re: BOWMAN AEROBOAT 1 By: Tony Bird Date: March 20, 2019, 11:07 am --------------------------------------------------------- Hi, Try Again! After cutting the sides to size they were steamed and bent to shape with weights (bricks). [attachimg=2] The frame spacer and transom were cut to size. [attachimg=3] And contruction began. [attachimg=4] [attachimg=5] [attachimg=6] [attachimg=7] [attachimg=8] [attachimg=9] [attachimg=10] [attachimg=11] Well I hope this works! Regards Tony. #Post#: 3219-------------------------------------------------- Re: BOWMAN AEROBOAT 1 By: Hero Date: March 20, 2019, 11:30 am --------------------------------------------------------- [quote author=Tony Bird link=topic=400.msg3188#msg3188 date=1553085535] Hi, Bare with me. Regards Tony. [/quote] I will not! I'm a modest guy. #Post#: 3226-------------------------------------------------- Re: BOWMAN AEROBOAT 1 By: Tony Bird Date: March 20, 2019, 11:47 am --------------------------------------------------------- Hi Bob, Thanks, senior moment! Take care. Tony. #Post#: 3230-------------------------------------------------- Re: BOWMAN AEROBOAT 1 By: Stoker Date: March 20, 2019, 11:52 am --------------------------------------------------------- Very excited to see you putting up a build thread here Tony ... GREAT!!! #Post#: 3238-------------------------------------------------- Re: BOWMAN AEROBOAT 1 By: Swift Fox Date: March 20, 2019, 12:54 pm --------------------------------------------------------- Great to see you on here Tony! I know how good your Eagle replica was so this will be another stunning boat build. [emoji108] #Post#: 3254-------------------------------------------------- Re: BOWMAN AEROBOAT 1 By: jkbixby Date: March 20, 2019, 2:03 pm --------------------------------------------------------- A great project Tony that's already showing your skill - will be following this closely! #Post#: 3261-------------------------------------------------- Re: BOWMAN AEROBOAT 1 By: classixs Date: March 20, 2019, 2:38 pm --------------------------------------------------------- Ditto ! :) #Post#: 3328-------------------------------------------------- Re: BOWMAN AEROBOAT 1 By: Hero Date: March 21, 2019, 8:39 am --------------------------------------------------------- I like your way of bending the sides. I started a Polly Wog a while back, and the sides didn't bend evenly, so I have to start over, and this time I'll use your brick trick. ***************************************************** (DIR) Next Page