(DIR) Return Create A Forum - Home --------------------------------------------------------- Office of Steam Forum for Model &amp ;amp;amp;amp;amp;amp; Toy Steam Gas &amp ;amp;amp;amp;amp;amp;amp; Hot Air Engines (HTM) https://officeofsteamforum.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Metal & Wood Construction - Erector Sets - Mecc... ***************************************************** #Post#: 4296-------------------------------------------------- Gilbert Erector thread sizes By: CBWho Date: March 28, 2019, 10:27 pm --------------------------------------------------------- I bought a bunch of pulleys cheap (a set of two)... But I need set screws. Any idea on the thread size? #Post#: 4298-------------------------------------------------- Re: Gilbert Erector thread sizes By: Nick Date: March 28, 2019, 10:43 pm --------------------------------------------------------- Set Screws are part #S11 - 6-32 x 3/16" From 1933-52 nickel plated steel From 1951-62 cadmium plated steel #Post#: 4562-------------------------------------------------- Re: Gilbert Erector thread sizes By: Nick Date: March 30, 2019, 10:49 pm --------------------------------------------------------- Chris, you may find this helpful [attachimg=1] N21 Nut [attachimg=2] #Post#: 4593-------------------------------------------------- Re: Gilbert Erector thread sizes By: CBWho Date: March 31, 2019, 8:48 am --------------------------------------------------------- Thanks a bunch. The 50s Erectors come with motors and gear boxes. In the cheapo 2 sets I got (only $5 a piece not including shipping) there are 3 gear boxes 2 with motors attached and 1 without. (The without will become a steam powered gearbox.) Anyhow from the factory I noticed they used pan head set screws but they sometimes interfere with the gears. A dum dum design. I went to the hardware store and got #6 grub screws and it's much better. The gear box gears should be beveled for better engaging... #Post#: 4595-------------------------------------------------- Re: Gilbert Erector thread sizes By: CBWho Date: March 31, 2019, 8:52 am --------------------------------------------------------- Nick... From your chart, I have very early 50s sets. ;) *****************************************************