(DIR) Return Create A Forum - Home --------------------------------------------------------- Office of Steam Forum for Model &amp ;amp;amp;amp;amp;amp; Toy Steam Gas &amp ;amp;amp;amp;amp;amp;amp; Hot Air Engines (HTM) https://officeofsteamforum.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Restorations ***************************************************** #Post#: 49004-------------------------------------------------- Carette 105/5 "Lokomobile" (Overtype) By: Oberlok Date: February 3, 2022, 6:36 am --------------------------------------------------------- Not quite sure if I have shown this engine her before. Bought it a year ago (paid too much...). Only to find that it was not just used and sooty, but had suffered a severe burning and repainting and scratching and other forms of mistreatment... [attachimg=1] [attachimg=2] [attachimg=3] ...and that the cylinder end cap had come off: [attachimg=4] I decided, in a fit of mild craziness, to a) get her running again, b) retain as much of the old substance as possible. Took me some weeks, this is what she looks now like: [attachimg=5] [attachimg=6] [attachimg=7] Looks a bit blotchy, but I am astonished about how much of the old blueing is still there. Sadly missing a chimney, water gauge cover and the "door" for the fire box (a shield cum handle attached to the original burner, which I am desoldering at the moment) Here the first test run - mind, the steam pipe has not been re-soldered yet: (HTM) https://youtu.be/z-iHaKCZBQE (HTM) https://youtu.be/z-iHaKCZBQE And her with the governor in place: (HTM) https://youtu.be/Cs2SmhL4RIA (HTM) https://youtu.be/Cs2SmhL4RIA Tank you for your attention Thomas #Post#: 49011-------------------------------------------------- Re: Carette 105/5 "Lokomobile" (Overtype) By: Woe is me Date: February 3, 2022, 9:05 am --------------------------------------------------------- Hey Thomas, That didn't turn out too bad. I have the same one here and it's missing a few original things. The stack, front boiler support leg, and the burner are not factory issued. Like most of them out there mine is missing the catwalk supports, your lucky there, you have yours. One other thing I noticed different was the boiler endcap and the positioning of the site glass holes. Yours run straight up and down where mine run on a 45 degree angle that puts the drain cock in the bottom center. Now I wonder if someone took the endcap off and moved it on mine. They're good running engines. Thanks for showing it. #Post#: 49012-------------------------------------------------- Re: Carette 105/5 "Lokomobile" (Overtype) By: txlabman Date: February 3, 2022, 10:56 am --------------------------------------------------------- Nice job Thomas! 👏👏👏👏 #Post#: 49013-------------------------------------------------- Re: Carette 105/5 "Lokomobile" (Overtype) By: tenniV11 Date: February 3, 2022, 11:38 am --------------------------------------------------------- Thomas - it looks much better than before and I hope you will find the chimney. The other missing parts are not so important - on the other hand the small lever must still be mounted. Still worth the efforts to save a mistreated steam engine... Greetings over the lake, Arnold :D #Post#: 49014-------------------------------------------------- Re: Carette 105/5 "Lokomobile" (Overtype) By: skeptic49 Date: February 3, 2022, 12:33 pm --------------------------------------------------------- Congratulations, a remarkable restoration. #Post#: 49022-------------------------------------------------- Re: Carette 105/5 "Lokomobile" (Overtype) By: RedRyder Date: February 3, 2022, 5:49 pm --------------------------------------------------------- The difference speaks for itself, Thomas. You have performed a super nice restoration. Very well done..!! Gil #Post#: 49024-------------------------------------------------- Re: Carette 105/5 "Lokomobile" (Overtype) By: Oberlok Date: February 4, 2022, 5:47 am --------------------------------------------------------- [quote author=Woe is me link=topic=5320.msg49011#msg49011 date=1643900726] Hey Thomas, That didn't turn out too bad. I have the same one here and it's missing a few original things. The stack, front boiler support leg, and the burner are not factory issued. Like most of them out there mine is missing the catwalk supports, your lucky there, you have yours. One other thing I noticed different was the boiler endcap and the positioning of the site glass holes. Yours run straight up and down where mine run on a 45 degree angle that puts the drain cock in the bottom center. Now I wonder if someone took the endcap off and moved it on mine. They're good running engines. Thanks for showing it. [/quote] Tommy, I have seen quite a few Carette engines which have the angled sight-glass layout. Perhaps a matter of the size (boiler diameter) they came in? The boiler support pillar is partly melted away in the burning the engine must have suffered. I still would like to get a fitting chimney... Enjoy the steam videos now posted! #Post#: 49025-------------------------------------------------- Re: Carette 105/5 "Lokomobile" (Overtype) By: Oberlok Date: February 4, 2022, 5:49 am --------------------------------------------------------- Thank you all for your kind comments. I am quite pleased with the result myself. I have just posted videos of the first steam test in the video section! Thank you Thomas #Post#: 49038-------------------------------------------------- Re: Carette 105/5 "Lokomobile" (Overtype) By: Woe is me Date: February 4, 2022, 9:13 pm --------------------------------------------------------- Hey Thomas, I'm going to throw a couple pics in here for you, hope you don't mind. First pic is the front pillar, not as nice as your original one. Found a stack on German eBay that someone is making and was close, kind of. It's a little lose fitting so I folded some black heavy paper for both sides to shim it, works great. The last two pics show the site glass angle and the replacement burner,(not original) that it came with. Hope the stack thing helps you out where your at. [attach=1][attach=2][attach=3][attach=4][attach=5] #Post#: 49047-------------------------------------------------- Re: Carette 105/5 "Lokomobile" (Overtype) By: Oberlok Date: February 5, 2022, 3:13 am --------------------------------------------------------- Hi Tommy, thanks for the interesting pictures! The chimney looks good on this engines - the "crown" with the long vents is more of the Doll type (I believe the Carette ones had small round vents), but it definitely looks much better with such a fitting (that is: straight) chimney than without one... The front support serves its function - the (original) one on my engine is half eaten away by the fire... Perhaps it was not Carette's best idea to pint the burner vent directly at these supports. Regarding the end cap: a) so nice to see it with the water gauge cover! b) I do agree: it looks as if sb has rotated the whole end cap... But perhaps sb else has another photo for comparison. All the best Thomas ***************************************************** (DIR) Next Page