(DIR) Return Create A Forum - Home --------------------------------------------------------- Office of Steam Forum for Model &amp ;amp;amp;amp;amp;amp; Toy Steam Gas &amp ;amp;amp;amp;amp;amp;amp; Hot Air Engines (HTM) https://officeofsteamforum.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: General Discussion - Dynamos, Generators, Alternato... ***************************************************** #Post#: 51174-------------------------------------------------- Jin's FD5 Dynamo Review By: crazydoug Date: April 27, 2022, 1:14 pm --------------------------------------------------------- This came the other day, and I thought I would do a review and do some testing to see if it met the specs advertised. Sadly, it didn't even come close. It is rated up to 1 amp at 12 volts, and although it easily attained the 12 volts at about 2000 rpm, it would only light one 200 milliamp incandescent bulb. I started with four bulbs in parallel at 200 milliamps each and it would not light them at all, and then went down, one step at a time, until there was only one bulb left, which it did light. However, if you intend to use this generator in a model display with incandescent lighting, you'll be disappointed. However, it will operate a number of smaller LED lamps. 250 milliamps seems to be the extent of the load it can carry. Still, I'm very happy with the generator. It has a nice look, is a nice size for model engine displays, and has a price that can't be beat. (HTM) https://youtu.be/E0Jh1e1kJAE #Post#: 51184-------------------------------------------------- Re: Jin's FD5 Dynamo Review By: smokey1961 Date: April 27, 2022, 6:13 pm --------------------------------------------------------- Thank you for posting,,good info to know...thanks again.. #Post#: 51201-------------------------------------------------- Re: Jin's FD5 Dynamo Review By: Jim Date: April 27, 2022, 10:27 pm --------------------------------------------------------- Thanks Doug, enjoyed watching the vid mate. #Post#: 51210-------------------------------------------------- Re: Jin's FD5 Dynamo Review By: Steamloco Date: April 28, 2022, 10:47 am --------------------------------------------------------- PM Research has one that is rated at 10 VDC @ 1A. Nice industrial look to it. Needs a large engine to power it to its max. #Post#: 51220-------------------------------------------------- Re: Jin's FD5 Dynamo Review By: txlabman Date: April 28, 2022, 1:48 pm --------------------------------------------------------- Thanks for the review Doug! #Post#: 51232-------------------------------------------------- Re: Jin's FD5 Dynamo Review By: crazydoug Date: April 28, 2022, 6:39 pm --------------------------------------------------------- [quote author=Steamloco link=topic=5611.msg51210#msg51210 date=1651160863] PM Research has one that is rated at 10 VDC @ 1A. Nice industrial look to it. Needs a large engine to power it to its max. [/quote] I have 2 of those. I machined the first one and decided it was worth the extra $$ to buy the next one ready to run. They work well, but I have never really done a load test. Crazydoug *****************************************************