(DIR) Return Create A Forum - Home --------------------------------------------------------- Office of Steam Forum for Model &amp ;amp;amp;amp;amp;amp; Toy Steam Gas &amp ;amp;amp;amp;amp;amp;amp; Hot Air Engines (HTM) https://officeofsteamforum.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Restorations ***************************************************** #Post#: 60165-------------------------------------------------- Re: New Project By: AirSpyder Date: February 7, 2024, 4:58 pm --------------------------------------------------------- Thanks Bruce, thanks Charlie. I intend to keep updating but my progress will likely be pretty slow. Cheers Bill #Post#: 60166-------------------------------------------------- Re: New Project By: Nick Date: February 7, 2024, 5:46 pm --------------------------------------------------------- Slow progress is still better than a lot of my progress 😂 thanks for the update Bill! Always good to hear from you. #Post#: 60168-------------------------------------------------- Re: New Project By: RedRyder Date: February 7, 2024, 6:44 pm --------------------------------------------------------- Hi Bill, It's great to see you posting again and this is a great project! Gil #Post#: 60169-------------------------------------------------- Re: New Project By: Stoker Date: February 7, 2024, 6:48 pm --------------------------------------------------------- Nice one Bill ...... a multitool like that would be the cat's meow in most any hobbyist's workshop! Glad you are bringing this little wonder back to life for us all to enjoy!!! #Post#: 60239-------------------------------------------------- Re: New Project By: AirSpyder Date: February 10, 2024, 2:26 pm --------------------------------------------------------- Hi all My second cam works pretty well, I've made a couple of test cuts with the scroll saw, a 1/8" thick piece of hard pine salvaged from a 100+ year old piano, cut pretty well. although a bit slow going as the big pulley turns the spindle at a rather low speed. [attachimg=1] My next steps will be to set up my de-rusting station, clean up the scroll saw and do a little painting. Here are a few of the other major attachments that still need some work. Disc sander [attachimg=2] Picture is out of order but here is the cam I made [attachimg=3] and the milling attachment [attachimg=4] This is the drum sander [attachimg=5] Cheers Bill #Post#: 60240-------------------------------------------------- Re: New Project By: txlabman Date: February 10, 2024, 2:38 pm --------------------------------------------------------- Great Progress Bill. What's left to do? #Post#: 60241-------------------------------------------------- Re: New Project By: Paula Date: February 10, 2024, 2:41 pm --------------------------------------------------------- Bill, that machine is so cool! [attachimg=1] Such a rare item, and you're doing a beautiful job with it. There was a time in my life when I would have given anything to have a machine like that. (Who am I kidding? I still want one!) Paula #Post#: 60253-------------------------------------------------- Re: New Project By: St Paul Steam Date: February 10, 2024, 8:36 pm --------------------------------------------------------- I love it Bill, just keeps getting better. #Post#: 60298-------------------------------------------------- Re: New Project By: AirSpyder Date: February 12, 2024, 5:09 pm --------------------------------------------------------- Thanks for the comments Nick, Gil, Charlie Bruce and Paula. I've cleaned up some of the rust and grime from the steel parts. [attachimg=1] [attachimg=2] And started painting the casting, [attachimg=3] got to hit the other side again and I'll reassemble. There are still plenty more parts to clean and paint but I'm whittling it down. Cheers. Bill #Post#: 60318-------------------------------------------------- Re: New Project By: txlabman Date: February 13, 2024, 11:28 am --------------------------------------------------------- More progress! Thanks for the update Bill. Looking forward to seeing your progress. ***************************************************** (DIR) Previous Page (DIR) Next Page