Subj : Re: using StereoPlayer V10.3 with Super CPU issue
To   : traym...@gmail.com
From : traymond160@gmail.com
Date : Wed Nov 11 2020 12:56 pm

On Friday, September 25, 2020 at 12:02:37 PM UTC-6, traym...@gmail.com wrote:
> Hi I have come across an issue with the Super CPU running the older 
> CGSC STEREOPLAYERV10.3 
> 
> I have come across an issue running on either a C64C or a 128DCR: 
> 
> Setup as follows: 
> 
> C64C or C128DCR(running in 64 mode) 
> Using either a V1 SUPER CPU or V2 SUPER CPU 
> Accessing Sid files etc using: UIEC2SD 
> STEREO PLAYER V10.3 
> 
> The computer can be on for at least 3 hours loading and playing SID music 
> ( the CGSC SIDS) so then at least AT 3 hours then just the IEC serial port seems to lockup, then when I try to load a Sid file the drive wont even 
> load anything. 
> 
> So then I did some hardware swapping: 
> I removed my UIEC2SD and tried a floppy drive, same thing the IEC serial port just seems to hang (or something else). 
> I plugged my IEC2SD back in, removed my Super CPU, tried loading a Sid file again, walla then any Sid files will then load okay. 
> 
> I tried this also on my 128DCR with the UIEC etc and the same 
> IEC lockup occurs, again remove the Super CPU and then lockup dissapears. 
> 
> On my V2 C64 Super CPU I removed the main cover (years ago) and the 
> cooling issue is easy. And NO I am very careful not to drop anything metal into the SCPU main board. :) 
> My V2 SCPU I installed a small 486 Cooling fan into the main case, I mainly use this SCPU with my 128DCR's, I tapped into the 12V side of the power source to power the cooling fan, ( with the SCPU cover installed) and running the Wave Browser to really 
run the Super Ram hard, the Fan does spin faster and never did overheat.. 
> 
> I dont think this is a cooling issue beause the computer doesnt lockup and the Super Ram doesnt lock the system up either. 
> This only occurs after 3 to 4 hours of operation and then I cant 
> load any Sid files, the IEC serial port seems to be locked up and the 
> Disk drive wont even respond. 
> 
> Any suggestions of what this might be, any possible fixes?

NEW UPDATE ON THIS ISSUE:
I had this happen again and yes this does lock the computer up.
It finally occured to me that maybe the STEREOPLAYERV10.3  system files may be corrupted.
I recopied those and then so far this problem has no come up again but I think this was the issue
and so it may not be the SUPER CPU causing the problem.

--- SoupGate-Win32 v1.05
 * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)

.