Subj : RE: WSMTP TLS 10060 Timeout
To   : All
From : CRAIG STRUTT
Date : Thu Jan 31 2019 07:12 pm

Date: Wed, 17 Jun 2015 21:11:46 -0400
From: CRAIG STRUTT
To: ALL
Subject: RE: WSMTP TLS 10060 Timeout
Newsgroups: win.server.program
Message-ID: <1434589906.32.1434558367@winserver.com>
References:  <1434558367.32.0@winserver.com>
X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
Lines: 67

Additional information.   The timeouts occur exactly 3 minutes after 
the SSL connection is made.   I've checked the ini file for WCSSL and 
wcsmtp has a 5 minute default timeout.   I've moved it up to 10 
minutes.   I'm wondering where else there is a 3 minute or 180 second 
timeout that can be increased.  I can't seem to find one.

On 6/17/2015 12:26 PM, CRAIG STRUTT wrote to ALL:

-> Ever since I turned on SSL/TLS I have begun to have timeout errors 
on 
-> receiving messages from some sources.   Here is the log from one.
-> ****************************************************
-> Wildcat! SMTP Server v6.2.452.2
-> SMTP log started at Tue, 16 Jun 2015  21:58:40
-> Connection Time: 20150616 21:58:40  cid: 00000DFE
-> SSL Enabled: YES
-> Client IP: 108.174.3.194 (unknown)
-> 21:58:40 S: 220 icsbbs.com Wildcat! ESMTP Server v6.2.452.2 ready
-> 21:58:40 C: EHLO maile-ab.linkedin.com
-> 21:58:40 S: 250-icsbbs.com, Pleased to meet you.
-> 21:58:40 S: 250-SUBMITTER
-> 21:58:40 S: 250-ETRN
-> 21:58:40 S: 250-AUTH CRAM-MD5 LOGIN PLAIN PLAIN-MD5 SHA-1
-> 21:58:40 S: 250-AUTH=LOGIN
-> 21:58:40 S: 250-HELP
-> 21:58:40 S: 250 STARTTLS
-> 21:58:41 C: STARTTLS
-> 21:58:41 S: 220 Ready to start TLS
-> 21:58:41 ** Begin SSL negotiation
-> 21:58:41 ** SSL negotiation successful
-> 21:58:41 C: EHLO maile-ab.linkedin.com
-> 21:58:41 S: 250-icsbbs.com, Pleased to meet you.
-> 21:58:41 S: 250-SUBMITTER
-> 21:58:41 S: 250-ETRN
-> 21:58:41 S: 250-AUTH CRAM-MD5 LOGIN PLAIN PLAIN-MD5 SHA-1
-> 21:58:41 S: 250-AUTH=LOGIN
-> 21:58:41 S: 250 HELP
-> 21:58:41 C: MAIL FROM:<s-
-> 
2h842osvhoqemo2jjgianlrqvp0aqmerrpajn7oj586ty3xezrbvbsqf@bounce.linkedi
-> n.com>
-> 21:58:41 S: 250 <s-
-> 
2h842osvhoqemo2jjgianlrqvp0aqmerrpajn7oj586ty3xezrbvbsqf@bounce.linkedi
-> n.com>... Sender validation pending. Continue.
-> 21:58:41 C: RCPT TO:<manager@oldmanriverbrewery.com>
-> 21:58:42 ** WCX Process: wcsap  ret: -1
-> 21:58:42 S: 250 <********@*********.com>... Recipient ok
-> 21:58:42 C: DATA
-> 21:58:42 S: 354 Start mail input; end with <CRLF>.<CRLF>
-> 22:06:43 S: 421 Idle Timeout - Server closing transmission channel.
-> 22:06:43 ** Completed
-> ******************************************************************
-> And in the non-verbose log I get things like this:
-> ******************************************************************
-> 20150617 10:45:15 (1478) error 10060 : connection timeout receiving 
-> data from remote . total received: 24560
-> ******************************************************************
-> 
-> Does my processor not have enough power, or is there something else 
-> going on?   I obviously would like to leave encryption on, but I 
need 
-> to be sure that all mail can come in. 
-> 
-> Spam influx has been terrible lately.
->  
 
--- Platinum Xpress/Win/WINServer v3.1
 * Origin: Prison Board BBS Mesquite Tx  //telnet.RDFIG.NET www. (1:124/5013)

.