Subj : Synology Bonding
To   : poindexter FORTRAN
From : Tracker1
Date : Mon May 08 2023 12:14 am

 PF> I have a Synology DS1010+ in my homelab. I did some cleaning up this
 PF> week, re-routing cables here and there, dusting out old fans, cleaning
 PF> up unused cables, and so forth.

 PF> I set up bonding on my NAS, and have 2 gig ports showing up as a single
 PF> bonded pair. I was streaming video from the NAS while cleaning up, and I
 PF> was able to pull the second ethernet cable without affecting the stream.
 PF> When I pulled the first cable, playback stopped for about 30 seconds.
 PF> Odd.

 PF> My original plan was to have the NAS dual homed into two separate
 PF> switches in my office. One's in a router I use as an AP, the other is a
 PF> desktop switch. I have 2 ethernets running downstairs from my office to
 PF> my cable modem and had thought about building some redundancy between
 PF> the two, but I'm using the second ethernet for an office phone line now.

Bonded mode only works correctly, from what I understand, with a managed switches set to bonded on the other side. So would maybe double check you're even getting the throughput you expect.
  
   
--    
Michael J. Ryan    
+o roughneckbbs.com   
tracker1@roughneckbbs.com
--- SBBSecho 3.15-Linux
 * Origin: Roughneck BBS - roughneckbbs.com (21:3/149)

.