Subj : Sio2K.sys To : Bob Juge From : Peter Santiago Date : Sun Jul 01 2001 01:41 am Bob Juge wrote in a message to Peter Santiago: PS> Anybody here using sio2k.sys? Having a bit of a problem. With PS> sio.sys (version 1), Binkley can answer the modem, however with PS> sio2k.sys. Both Binkley and Maximus WFC refuses to answer calls. PS> Furthermore, the usual RING modem result code doesn't appear. And PS> it's taking quite a while to initialize the port. BJ> Please provide your SIO2K lines from CONFIG.SYS. PS> Another question is if I'm going to let people telnet into my BBS PS> via VMODEM and I would want to provide ten virtual modem ports for PS> them to connect over the Internet, does that mean I have no choice PS> but to buy a 16 port version of the SIO.sys package? BJ> I'm pretty sure that Ray will sell you a 10 port or 12 port version BJ> of SIO 1.60d (remember real hardware ports _and_ Vmodem ports count BJ> toward the total). Telnet to gwinn.com and see for sure. However, BJ> SIO2K supports up to 255 ports, and is currently in beta and free. BJ> - Bob BJ> Internet : bob@juge.com BJ> Telnet, Vmodem, WWW or FTP to juge.com Bob, These are the lines that invoke sio2k.sys in my config.sys: DEVICE=C:\SIO2K\UART.SYS LOGFILE=C:\SIO2K\SIO2K.LOG DEVICE=C:\SIO2K\VSIO2K.SYS LOGFILE=C:\SIO2K\VSIO2K.LOG DEVICE=C:\SIO2K\SIO2K.SYS LOGFILE=C:\SIO2K\SIO2K.LOG Attached to com2 is an external modem while com3 is an internal PnP ISA modem with IRQ 10 set by the PnP BIOS. (COM2 and COM3 initializes w/o any problems with sio160d package...) I have tried running logger.exe (included with the sio2k package) as advised in the faq, then running modes com2:115200,n,8,1. :( Still won't work properly. How I would wish to be able to buy a 10/12 port version of sio.sys... But it's going to be too bloddy expensive for me... (In fact, I have been mulling over migrating to Linux... too bad Maximus software is not yet ported to Linux.) BTW, I have been visiting your site at www.juge.com. A very handy site it is. =) Thanks. Regards, Peter --- timEd/2 1.10.y2k+ * Origin: PSInergy BBS * Ermita, Manila * Philippines (6:750/101) .