Subj : (Possibly) Ignorant Question
To   : Daniel Torrey
From : mark lewis
Date : Mon Dec 24 2012 09:50 pm


 DT> @REPLY: 1:116/901.0 0d7a4410
 DT> @MSGID: 1:132/505 50d856e4
 DT> @PID: GED+386 1.1.4.7
 DT> @CHRS: IBMPC 2

 DT> Squish thinks that ASCII 95 is the correct character to use in the
 DT> tear, that would explain why it's adding one even if there's a
 DT> previous (ASCII 45) tear in the message, added buy GOldED+ - if
 DT> Squish is looking for three 95 chars and what's there is 3 45
 DT> chars.

FWIW: here's all your control lines above and below so you can see exactly what 
is getting out here to the rest of the network ;)

 DT> There's no GoldED+ tear in the messages I'm sending out because
 DT> I've configured GoldED+ to not add one - I don't want to end up
 DT> with two, which is what was happening when I was testing.

two tearlines, while not "pretty" is not bad, either... but your GoldED is 
using the PID since you've turned off the tearline stuff... PIDs and tearlines 
with text are a nono according to the PID/TID spec...

 DT> Thanks for your help, I'll see what I can figure out.

might need the squish sources and apply some code fixing so it'll either 
recognize the PID and add an empty tearline or it'll use the TIP instead and 
have an empty tearline... then one might also add the option to specify 
stripping the tearline since they are not required by the spec ;)

 DT> Daniel

 DT> ... Vermont USA: 18th-century charm, 19th-century conveniences 

 DT> ___ Squish/386 v1.11
 DT>  - Origin: • Almost At The Top Of The Hill • Newfane, VT USA •
 DT> (1:132/505) 

the above modified automatically when quoted... the tearline is now three 
underscores instead of dashes... the asterisk in the origin line is now a 
single dash... my editor, TimED, does this automatically so that brain dead 
tossers don't get confused...

 DT> @EEN-BY: 10/1 11/201 331 18/0 19/33 34/999 103/105 109/500 112/0 
 DT> 114/487
 DT> @EEN-BY: 116/18 116 901 123/0 52 57 140 500 789 880 1025 128/2 187
 DT> @EEN-BY: 132/174 505 135/364 137/10 140/1 154/10 222/2 226/0 600 229/426
 DT> @EEN-BY: 230/150 249/303 250/100 306 261/38 100 1406 1466 266/420
 DT> @EEN-BY: 266/1413 267/155 280/1027 292/908 298/5 311/2 320/101 119
 DT> @EEN-BY: 320/219 322/320 759 340/400 387/22 396/45 633/260 712/848
 DT> @EEN-BY: 801/161 189 2320/105 303 3634/12 22 50 5030/1256
 DT> @ATH: 132/505 174 320/119 261/38 123/500 3634/12

)\/(ark

--- 
 * Origin:  (1:3634/12.42)

.