- - - - - --------------------------------------------- - - - - - 
                              C I R C U M L U N A R
                            T R A N S M I S S I O N S
       Issue One                                                  May 2021
       
       Printer Spreads
       ^^^^^^^^^^^^^^^
       
       For this issue, a print-ready A5 Booklet is available:
       
 (DOC) A5 Booklet (short-side printing)
 (DOC) A5 Booklet (long-side printing)
       
       For standard home printers, the short-side version should be
       appropriate. If you are printing using an office printer/copier,
       then you should likely use the long-side version.
       
       All that is needed to print and bind this booklet (besides a
       printer) is:
       
             8 Sheets of standard weight paper (~60-80g)
             A stapler 
             A piece of corrugated cardboard or something similar
       
       After printing, ensure that the pages are properly collated, then
       simply fold them in half. Crease it as hard as possible. Reopen the
       booklet and lay it flat over a piece of cardboard on a hard surface
       (the cover page should be facing up). Staple two or three times
       along the "spine." The ends of the staples should penetrate the
       cardboard. Turn the booklet over, and using a blunt object, bend
       the ends of the staples inward along the spine. And that's it!
       
       The source LaTeX and PDF files are also available:
       
 (TXT) ct-001.latex
 (DOC) ct-001.pdf
       
        - - - - - --------------------------------------------- - - - - - 
       ___________________________________________________________________
                      Gophered by Gophernicus/3.1.1 on Debian/8.11 x86_64