diff -x .deps -x autom4te.cache -ur mtr-0.72/aclocal.m4 mtr-0.73/aclocal.m4
--- mtr-0.72/aclocal.m4	2006-09-29 21:34:06.000000000 +0200
+++ mtr-0.73/aclocal.m4	2008-04-07 18:32:46.000000000 +0200
@@ -1,4 +1,4 @@
-# generated automatically by aclocal 1.9.5 -*- Autoconf -*-
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
 # 2005  Free Software Foundation, Inc.
@@ -208,201 +208,6 @@
   rm -f conf.gtktest
 ])
 
-# Configure paths for GTK+
-# Owen Taylor     97-11-3
-
-dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
-dnl
-AC_DEFUN(AM_PATH_GTK,
-[dnl 
-dnl Get the cflags and libraries from the gtk-config script
-dnl
-AC_ARG_WITH(gtk-prefix,[  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)],
-            gtk_config_prefix="$withval", gtk_config_prefix="")
-AC_ARG_WITH(gtk-exec-prefix,[  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
-            gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
-AC_ARG_ENABLE(gtktest, [  --disable-gtktest       Do not try to compile and run a test GTK program],
-		    , enable_gtktest=yes)
-
-  for module in . $4
-  do
-      case "$module" in
-         gthread) 
-             gtk_config_args="$gtk_config_args gthread"
-         ;;
-      esac
-  done
-
-  if test x$gtk_config_exec_prefix != x ; then
-     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
-     if test x${GTK_CONFIG+set} != xset ; then
-        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
-     fi
-  fi
-  if test x$gtk_config_prefix != x ; then
-     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
-     if test x${GTK_CONFIG+set} != xset ; then
-        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
-     fi
-  fi
-
-  AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
-  min_gtk_version=ifelse([$1], ,0.99.7,$1)
-  AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
-  no_gtk=""
-  if test "$GTK_CONFIG" = "no" ; then
-    no_gtk=yes
-  else
-    GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
-    GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
-    gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_gtktest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $GTK_CFLAGS"
-      LIBS="$GTK_LIBS $LIBS"
-dnl
-dnl Now check if the installed GTK is sufficiently new. (Also sanity
-dnl checks the results of gtk-config to some extent
-dnl
-      rm -f conf.gtktest
-      AC_TRY_RUN([
-#include <gtk/gtk.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int 
-main ()
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  system ("touch conf.gtktest");
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = g_strdup("$min_gtk_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_gtk_version");
-     exit(1);
-   }
-
-  if ((gtk_major_version != $gtk_config_major_version) ||
-      (gtk_minor_version != $gtk_config_minor_version) ||
-      (gtk_micro_version != $gtk_config_micro_version))
-    {
-      printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
-             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
-             gtk_major_version, gtk_minor_version, gtk_micro_version);
-      printf ("*** was found! If gtk-config was correct, then it is best\n");
-      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
-      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-      printf("*** required on your system.\n");
-      printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
-      printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
-      printf("*** before re-running configure\n");
-    } 
-#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
-  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
-	   (gtk_minor_version != GTK_MINOR_VERSION) ||
-           (gtk_micro_version != GTK_MICRO_VERSION))
-    {
-      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
-	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
-      printf("*** library (version %d.%d.%d)\n",
-	     gtk_major_version, gtk_minor_version, gtk_micro_version);
-    }
-#endif /* defined (GTK_MAJOR_VERSION) ... */
-  else
-    {
-      if ((gtk_major_version > major) ||
-        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
-        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
-      {
-        return 0;
-       }
-     else
-      {
-        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
-               gtk_major_version, gtk_minor_version, gtk_micro_version);
-        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
-	       major, minor, micro);
-        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
-        printf("***\n");
-        printf("*** If you have already installed a sufficiently new version, this error\n");
-        printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
-        printf("*** being found. The easiest way to fix this is to remove the old version\n");
-        printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
-        printf("*** correct copy of gtk-config. (In this case, you will have to\n");
-        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-        printf("*** so that the correct libraries are found at run-time))\n");
-      }
-    }
-  return 1;
-}
-],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_gtk" = x ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$GTK_CONFIG" = "no" ; then
-       echo "*** The gtk-config script installed by GTK could not be found"
-       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the GTK_CONFIG environment variable to the"
-       echo "*** full path to gtk-config."
-     else
-       if test -f conf.gtktest ; then
-        :
-       else
-          echo "*** Could not run GTK test program, checking why..."
-          CFLAGS="$CFLAGS $GTK_CFLAGS"
-          LIBS="$LIBS $GTK_LIBS"
-          AC_TRY_LINK([
-#include <gtk/gtk.h>
-#include <stdio.h>
-],      [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding GTK or finding the wrong"
-          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
-          echo "***"
-          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
-          echo "*** came with the system with the command"
-          echo "***"
-          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
-          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
-          echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     GTK_CFLAGS=""
-     GTK_LIBS=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(GTK_CFLAGS)
-  AC_SUBST(GTK_LIBS)
-  rm -f conf.gtktest
-])
-
 # Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
@@ -420,7 +225,7 @@
 # Call AM_AUTOMAKE_VERSION so it can be traced.
 # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.9.5])])
+	 [AM_AUTOMAKE_VERSION([1.9.6])])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
Only in mtr-0.73: config.h
diff -x .deps -x autom4te.cache -ur mtr-0.72/config.h.in mtr-0.73/config.h.in
--- mtr-0.72/config.h.in	2006-09-29 21:40:38.000000000 +0200
+++ mtr-0.73/config.h.in	2006-10-05 10:49:15.000000000 +0200
@@ -32,6 +32,10 @@
 /* Define to 1 if you have the <curses.h> header file. */
 #undef HAVE_CURSES_H
 
+/* Define to 1 if you have the declaration of `errno', and to 0 if you don't.
+   */
+#undef HAVE_DECL_ERRNO
+
 /* Define to 1 if you have the <inttypes.h> header file. */
 #undef HAVE_INTTYPES_H
 
@@ -74,6 +78,9 @@
 /* Define to 1 if you have the `seteuid' function. */
 #undef HAVE_SETEUID
 
+/* Define if your system has socklen_t */
+#undef HAVE_SOCKLEN_T
+
 /* Define to 1 if you have the <stdint.h> header file. */
 #undef HAVE_STDINT_H
 
@@ -86,6 +93,9 @@
 /* Define to 1 if you have the <string.h> header file. */
 #undef HAVE_STRING_H
 
+/* Define if you have struct in_addr */
+#undef HAVE_STRUCT_INADDR
+
 /* Define to 1 if you have the <sys/stat.h> header file. */
 #undef HAVE_SYS_STAT_H
 
Only in mtr-0.73: config.h.in~
Only in mtr-0.73: config.log
Only in mtr-0.73: config.status
diff -x .deps -x autom4te.cache -ur mtr-0.72/configure mtr-0.73/configure
--- mtr-0.72/configure	2006-09-29 21:41:56.000000000 +0200
+++ mtr-0.73/configure	2008-04-07 18:32:49.000000000 +0200
@@ -1,25 +1,54 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59.
+# Generated by GNU Autoconf 2.61.
 #
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -29,8 +58,43 @@
 fi
 
 
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
 # Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -44,18 +108,19 @@
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    $as_unset $as_var
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
   fi
 done
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -63,157 +128,388 @@
 
 
 # Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
+# CDPATH.
+$as_unset CDPATH
 
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+if test "x$CONFIG_SHELL" = x; then
+  if (eval ":") 2>/dev/null; then
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+
+  if test $as_have_required = yes && 	 (eval ":
+(as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
 fi
 
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
 
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=\$LINENO
+  as_lineno_2=\$LINENO
+  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+  :
+else
+  as_candidate_shells=
     as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
+  case $as_dir in
 	 /*)
-	   if ("$as_dir/$as_base" -c '
+	   for as_base in sh bash ksh sh5; do
+	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+	   done;;
+       esac
+done
+IFS=$as_save_IFS
+
+
+      for as_shell in $as_candidate_shells $SHELL; do
+	 # Try only shells that exist, to save several forks.
+	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		{ ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+  CONFIG_SHELL=$as_shell
+	       as_have_required=yes
+	       if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+  (exit $1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
   as_lineno_1=$LINENO
   as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+  break
+fi
+
+fi
+
+      done
+
+      if test "x$CONFIG_SHELL" != x; then
+  for as_var in BASH_ENV ENV
+        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+        done
+        export CONFIG_SHELL
+        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+    if test $as_have_required = no; then
+  echo This script requires a shell more modern than all the
+      echo shells that I found on your system.  Please install a
+      echo modern shell, or manually run the script under such a
+      echo shell if you do have one.
+      { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+  echo No shell found that supports shell functions.
+  echo Please tell autoconf@gnu.org about your system,
+  echo including any error possibly output before this
+  echo message
+}
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
 
   # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
   # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
   # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
+  chmod +x "$as_me.lineno" ||
     { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
 
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
 echo >conf$$.file
 if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
     as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
 elif ln conf$$.file conf$$ 2>/dev/null; then
   as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
@@ -222,7 +518,28 @@
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+        test -d "$1/.";
+      else
+	case $1 in
+        -*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -231,39 +548,27 @@
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
 
+exec 7<&0 </dev/null 6>&1
 
 # Name of the host.
 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
-exec 6>&1
-
 #
 # Initializations.
 #
 ac_default_prefix=/usr/local
+ac_clean_files=
 ac_config_libobj_dir=.
+LIBOBJS=
 cross_compiling=no
 subdirs=
 MFLAGS=
 MAKEFLAGS=
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
 # Identity of this package.
 PACKAGE_NAME=
 PACKAGE_TARNAME=
@@ -275,42 +580,134 @@
 # Factoring default headers for most tests.
 ac_includes_default="\
 #include <stdio.h>
-#if HAVE_SYS_TYPES_H
+#ifdef HAVE_SYS_TYPES_H
 # include <sys/types.h>
 #endif
-#if HAVE_SYS_STAT_H
+#ifdef HAVE_SYS_STAT_H
 # include <sys/stat.h>
 #endif
-#if STDC_HEADERS
+#ifdef STDC_HEADERS
 # include <stdlib.h>
 # include <stddef.h>
 #else
-# if HAVE_STDLIB_H
+# ifdef HAVE_STDLIB_H
 #  include <stdlib.h>
 # endif
 #endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
 #  include <memory.h>
 # endif
 # include <string.h>
 #endif
-#if HAVE_STRINGS_H
+#ifdef HAVE_STRINGS_H
 # include <strings.h>
 #endif
-#if HAVE_INTTYPES_H
+#ifdef HAVE_INTTYPES_H
 # include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-#  include <stdint.h>
-# endif
 #endif
-#if HAVE_UNISTD_H
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar GTK_OBJ CURSES_OBJ CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP EGREP PKG_CONFIG GTK_CFLAGS GTK_LIBS GTK_CONFIG LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+INSTALL_PROGRAM
+INSTALL_SCRIPT
+INSTALL_DATA
+CYGPATH_W
+PACKAGE
+VERSION
+ACLOCAL
+AUTOCONF
+AUTOMAKE
+AUTOHEADER
+MAKEINFO
+install_sh
+STRIP
+INSTALL_STRIP_PROGRAM
+mkdir_p
+AWK
+SET_MAKE
+am__leading_dot
+AMTAR
+am__tar
+am__untar
+GTK_OBJ
+CURSES_OBJ
+CC
+CFLAGS
+LDFLAGS
+CPPFLAGS
+ac_ct_CC
+EXEEXT
+OBJEXT
+DEPDIR
+am__include
+am__quote
+AMDEP_TRUE
+AMDEP_FALSE
+AMDEPBACKSLASH
+CCDEPMODE
+am__fastdepCC_TRUE
+am__fastdepCC_FALSE
+CPP
+GREP
+EGREP
+PKG_CONFIG
+GTK_CFLAGS
+GTK_LIBS
+LIBOBJS
+LTLIBOBJS'
 ac_subst_files=''
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
 
 # Initialize some variables set by options.
 ac_init_help=
@@ -337,34 +734,48 @@
 # and all the variables that are supposed to be based on exec_prefix
 # by default will actually change.
 # Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
 bindir='${exec_prefix}/bin'
 sbindir='${exec_prefix}/sbin'
 libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
 
 ac_prev=
+ac_dashdash=
 for ac_option
 do
   # If the previous option needs an argument, assign it.
   if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
+    eval $ac_prev=\$ac_option
     ac_prev=
     continue
   fi
 
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
+  esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
 
-  case $ac_option in
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
 
   -bindir | --bindir | --bindi | --bind | --bin | --bi)
     ac_prev=bindir ;;
@@ -386,33 +797,45 @@
   --config-cache | -C)
     cache_file=config.cache ;;
 
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+  -datadir | --datadir | --datadi | --datad)
     ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
     datadir=$ac_optarg ;;
 
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
   -disable-* | --disable-*)
     ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid feature name: $ac_feature" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+    eval enable_$ac_feature=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
     ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid feature name: $ac_feature" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+    eval enable_$ac_feature=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -439,6 +862,12 @@
   -host=* | --host=* | --hos=* | --ho=*)
     host_alias=$ac_optarg ;;
 
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
   -includedir | --includedir | --includedi | --included | --include \
   | --includ | --inclu | --incl | --inc)
     ac_prev=includedir ;;
@@ -463,13 +892,16 @@
   | --libexe=* | --libex=* | --libe=*)
     libexecdir=$ac_optarg ;;
 
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
   -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
+  | --localstate | --localstat | --localsta | --localst | --locals)
     ac_prev=localstatedir ;;
   -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
     localstatedir=$ac_optarg ;;
 
   -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -534,6 +966,16 @@
   | --progr-tra=* | --program-tr=* | --program-t=*)
     program_transform_name=$ac_optarg ;;
 
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
@@ -586,24 +1028,20 @@
   -with-* | --with-*)
     ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid package name: $ac_package" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_$ac_package='$ac_optarg'" ;;
+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+    eval with_$ac_package=\$ac_optarg ;;
 
   -without-* | --without-*)
     ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid package name: $ac_package" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+    eval with_$ac_package=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -634,8 +1072,7 @@
     expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
    { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
+    eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
@@ -655,27 +1092,19 @@
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-	      localstatedir libdir includedir oldincludedir infodir mandir
+# Be sure to have absolute directory names.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
 do
-  eval ac_val=$`echo $ac_var`
+  eval ac_val=\$$ac_var
   case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
+  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; }
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -702,74 +1131,76 @@
 test "$silent" = yes && exec 6>/dev/null
 
 
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  { echo "$as_me: error: Working directory cannot be determined" >&2
+   { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  { echo "$as_me: error: pwd does not report name of working directory" >&2
+   { (exit 1); exit 1; }; }
+
+
 # Find the source files, if location was not specified.
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$0" ||
 $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$0" : 'X\(//\)[^/]' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
+  if test ! -r "$srcdir/$ac_unique_file"; then
     srcdir=..
   fi
 else
   ac_srcdir_defaulted=no
 fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-   { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+   { (exit 1); exit 1; }; }
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
 
 #
 # Report the --help message.
@@ -798,9 +1229,6 @@
   -n, --no-create         do not create output files
       --srcdir=DIR        find the sources in DIR [configure dir or \`..']
 
-_ACEOF
-
-  cat <<_ACEOF
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
 			  [$ac_default_prefix]
@@ -818,15 +1246,22 @@
   --bindir=DIR           user executables [EPREFIX/bin]
   --sbindir=DIR          system admin executables [EPREFIX/sbin]
   --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
   --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
   --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
   --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
   --libdir=DIR           object code libraries [EPREFIX/lib]
   --includedir=DIR       C header files [PREFIX/include]
   --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
+  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR          info documentation [DATAROOTDIR/info]
+  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR           man documentation [DATAROOTDIR/man]
+  --docdir=DIR           documentation root [DATAROOTDIR/doc/PACKAGE]
+  --htmldir=DIR          html documentation [DOCDIR]
+  --dvidir=DIR           dvi documentation [DOCDIR]
+  --pdfdir=DIR           pdf documentation [DOCDIR]
+  --psdir=DIR            ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -850,140 +1285,106 @@
   --enable-gtk2           Compile against GTK2 instead of GTK+
   --disable-ipv6          Do not enable IPv6
   --disable-gtktest       do not try to compile and run a test GTK+ program
-  --disable-gtktest       Do not try to compile and run a test GTK program
 
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
   --without-gtk           Do not try to use GTK+ at all
-  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)
-  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)
 
 Some influential environment variables:
   CC          C compiler command
   CFLAGS      C compiler flags
   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
               nonstandard directory <lib dir>
-  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
-              headers in a nonstandard directory <include dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
   CPP         C preprocessor
 
 Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
 
 _ACEOF
+ac_status=$?
 fi
 
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
+    test -d "$ac_dir" || continue
     ac_builddir=.
 
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
   ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-	   test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
     else
       echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd "$ac_popdir"
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
   done
 fi
 
-test -n "$ac_init_help" && exit 0
+test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.61
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
-  exit 0
+  exit
 fi
-exec 5>config.log
-cat >&5 <<_ACEOF
+cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+generated by GNU Autoconf 2.61.  Invocation command line was
 
   $ $0 $@
 
 _ACEOF
+exec 5>>config.log
 {
 cat <<_ASUNAME
 ## --------- ##
@@ -1002,7 +1403,7 @@
 /bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
 /usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
 /bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
 /usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
 /bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
@@ -1016,6 +1417,7 @@
   test -z "$as_dir" && as_dir=.
   echo "PATH: $as_dir"
 done
+IFS=$as_save_IFS
 
 } >&5
 
@@ -1037,7 +1439,6 @@
 ac_configure_args=
 ac_configure_args0=
 ac_configure_args1=
-ac_sep=
 ac_must_keep_next=false
 for ac_pass in 1 2
 do
@@ -1048,7 +1449,7 @@
     -q | -quiet | --quiet | --quie | --qui | --qu | --q \
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+    *\'*)
       ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
@@ -1070,9 +1471,7 @@
 	  -* ) ac_must_keep_next=true ;;
 	esac
       fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
+      ac_configure_args="$ac_configure_args '$ac_arg'"
       ;;
     esac
   done
@@ -1083,8 +1482,8 @@
 # When interrupted or exit'd, cleanup temporary files, and complete
 # config.log.  We remove comments because anyway the quotes in there
 # would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
 trap 'exit_status=$?
   # Save into config.log some information that might help in debugging.
   {
@@ -1097,20 +1496,34 @@
 _ASBOX
     echo
     # The following way of writing the cache mishandles newlines in values,
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
   (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       sed -n \
-	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
     *)
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-}
+    esac |
+    sort
+)
     echo
 
     cat <<\_ASBOX
@@ -1121,22 +1534,28 @@
     echo
     for ac_var in $ac_subst_vars
     do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
     if test -n "$ac_subst_files"; then
       cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
 _ASBOX
       echo
       for ac_var in $ac_subst_files
       do
-	eval ac_val=$`echo $ac_var`
-	echo "$ac_var='"'"'$ac_val'"'"'"
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1148,26 +1567,24 @@
 ## ----------- ##
 _ASBOX
       echo
-      sed "/^$/d" confdefs.h | sort
+      cat confdefs.h
       echo
     fi
     test "$ac_signal" != 0 &&
       echo "$as_me: caught signal $ac_signal"
     echo "$as_me: exit $exit_status"
   } >&5
-  rm -f core *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
     exit $exit_status
-     ' 0
+' 0
 for ac_signal in 1 2 13 15; do
   trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
 done
 ac_signal=0
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
+rm -f -r conftest* confdefs.h
 
 # Predefined preprocessor variables.
 
@@ -1198,14 +1615,17 @@
 
 # Let the site file select an alternate cache file if it wants to.
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
+if test -n "$CONFIG_SITE"; then
+  set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+  set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+  set x "$ac_default_prefix/share/config.site" \
+	"$ac_default_prefix/etc/config.site"
 fi
-for ac_site_file in $CONFIG_SITE; do
+shift
+for ac_site_file
+do
   if test -r "$ac_site_file"; then
     { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
 echo "$as_me: loading site script $ac_site_file" >&6;}
@@ -1221,8 +1641,8 @@
     { echo "$as_me:$LINENO: loading cache $cache_file" >&5
 echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
     esac
   fi
 else
@@ -1234,12 +1654,11 @@
 # Check that the precious variables saved in the cache have kept the same
 # value.
 ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+for ac_var in $ac_precious_vars; do
   eval ac_old_set=\$ac_cv_env_${ac_var}_set
   eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
       { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
@@ -1264,8 +1683,7 @@
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
@@ -1282,12 +1700,6 @@
    { (exit 1); exit 1; }; }
 fi
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
 
 
 
@@ -1304,33 +1716,44 @@
 
 
 
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 am__api_version="1.9"
 ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+  if test -f "$ac_dir/install-sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
     break
-  elif test -f $ac_dir/install.sh; then
+  elif test -f "$ac_dir/install.sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install.sh -c"
     break
-  elif test -f $ac_dir/shtool; then
+  elif test -f "$ac_dir/shtool"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/shtool install -c"
     break
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
    { (exit 1); exit 1; }; }
 fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -1345,8 +1768,8 @@
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1368,7 +1791,7 @@
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -1387,21 +1810,22 @@
     ;;
 esac
 done
+IFS=$as_save_IFS
 
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
+    # removed, or if the value is a relative name.
     INSTALL=$ac_install_sh
   fi
 fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -1411,8 +1835,8 @@
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
@@ -1454,20 +1878,20 @@
 Check your system clock" >&2;}
    { (exit 1); exit 1; }; }
 fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,$program_prefix,;$program_transform_name"
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
 # Double any \ or $.  echo might interpret backslashes.
 # By default was `s,x,x', remove it if useless.
 cat <<\_ACEOF >conftest.sed
 s/[\\$]/&&/g;s/;s,x,x,$//
 _ACEOF
 program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
+rm -f conftest.sed
 
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
@@ -1519,8 +1943,8 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AWK+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1533,54 +1957,57 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
+  { echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$AWK" && break
 done
 
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
 all:
-	@echo 'ac_maketemp="$(MAKE)"'
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
 _ACEOF
 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
 rm -f conftest.make
 fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
   SET_MAKE=
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
@@ -1613,7 +2040,7 @@
 
 # Define the identity of the package.
  PACKAGE=mtr
- VERSION=0.72
+ VERSION=0.73
 
 
 cat >>confdefs.h <<_ACEOF
@@ -1651,8 +2078,8 @@
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1665,32 +2092,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
+  { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_STRIP"; then
   ac_ct_STRIP=$STRIP
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1703,27 +2132,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_STRIP="strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
 fi
 fi
 ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
 if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  STRIP=$ac_ct_STRIP
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
 else
   STRIP="$ac_cv_prog_STRIP"
 fi
@@ -1759,8 +2202,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1773,32 +2216,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_CC"; then
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1811,36 +2256,51 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 else
   CC="$ac_cv_prog_CC"
 fi
 
 if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1853,74 +2313,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
 
+  fi
 fi
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1934,7 +2354,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
@@ -1945,6 +2365,7 @@
   fi
 done
 done
+IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
   # We found a bogon in the path, so make sure we never use it.
@@ -1962,22 +2383,23 @@
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$CC"; then
   if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl
+  for ac_prog in cl.exe
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1990,36 +2412,38 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
     test -n "$CC" && break
   done
 fi
 if test -z "$CC"; then
   ac_ct_CC=$CC
-  for ac_prog in cl
+  for ac_prog in cl.exe
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2032,29 +2456,45 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$ac_ct_CC" && break
 done
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 fi
 
 fi
@@ -2067,21 +2507,35 @@
    { (exit 1); exit 1; }; }
 
 # Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C compiler version" >&5
+echo "$as_me:$LINENO: checking for C compiler version" >&5
 ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler --version >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -v >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -V >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
@@ -2106,47 +2560,77 @@
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-  (eval $ac_link_default) 2>&5
+#
+# List of possible output files, starting from the most likely.
+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
+# only as a last resort.  b.out is created by i960 compilers.
+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
+#
+# The IRIX 6 linker writes into existing files which may not be
+# executable, retaining their permissions.  Remove them first so a
+# subsequent execution test works.
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { (ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link_default") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
 do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-	;;
-    conftest.$ac_ext )
-	# This is the source file.
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
 	;;
     [ab].out )
 	# We found the default executable, but exeext='' is most
 	# certainly right.
 	break;;
     *.* )
-	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	# FIXME: I believe we export ac_cv_exeext for Libtool,
-	# but it would be cool to find out if it's true.  Does anybody
-	# maintain Libtool? --akim.
-	export ac_cv_exeext
+        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
 	break;;
     * )
 	break;;
   esac
 done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
 else
+  ac_file=''
+fi
+
+{ echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6; }
+if test -z "$ac_file"; then
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
@@ -2158,19 +2642,21 @@
 fi
 
 ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
 
-# Check the compiler produces executables we can run.  If not, either
+# Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
 # If not cross compiling, check that we can run a simple program.
 if test "$cross_compiling" != yes; then
   if { ac_try='./$ac_file'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -2189,22 +2675,27 @@
     fi
   fi
 fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 
 rm -f a.out a.exe conftest$ac_cv_exeext b.out
 ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run.  If not, either
+# Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6; }
+
+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
@@ -2215,9 +2706,8 @@
 for ac_file in conftest.exe conftest conftest.*; do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	  export ac_cv_exeext
 	  break;;
     * ) break;;
   esac
@@ -2231,14 +2721,14 @@
 fi
 
 rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6; }
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
 if test "${ac_cv_objext+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2258,14 +2748,20 @@
 }
 _ACEOF
 rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
        break;;
   esac
@@ -2283,12 +2779,12 @@
 
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6; }
 OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
 if test "${ac_cv_c_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2311,49 +2807,49 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_compiler_gnu=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_compiler_gnu=no
+	ac_compiler_gnu=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
 GCC=`test $ac_compiler_gnu = yes && echo yes`
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
 if test "${ac_cv_prog_cc_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2369,37 +2865,118 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	CFLAGS=""
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_prog_cc_g=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_prog_cc_g=no
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
@@ -2415,12 +2992,12 @@
     CFLAGS=
   fi
 fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_cv_prog_cc_stdc=no
+  ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -2454,12 +3031,17 @@
 /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
    function prototypes and stuff, but not '\xHH' hex character constants.
    These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std1 is added to get
+   as 'x'.  The following induces an error, until -std is added to get
    proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
    array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std1.  */
+   that's true only with -std.  */
 int osf4_cc_array ['\x00' == 0 ? 1 : -1];
 
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
 int test (int i, double x);
 struct s1 {int (*f) (int a);};
 struct s2 {int (*f) (double a);};
@@ -2474,201 +3056,57 @@
   return 0;
 }
 _ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX 10.20 and later	-Ae
-# HP-UX older versions	-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 do
   CC="$ac_save_CC $ac_arg"
   rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_stdc=$ac_arg
-break
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_cc_c89=$ac_arg
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext
+
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
 done
-rm -f conftest.$ac_ext conftest.$ac_objext
+rm -f conftest.$ac_ext
 CC=$ac_save_CC
 
 fi
-
-case "x$ac_cv_prog_cc_stdc" in
-  x|xno)
-    echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+  xno)
+    { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
   *)
-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-    CC="$CC $ac_cv_prog_cc_stdc" ;;
+    CC="$CC $ac_cv_prog_cc_c89"
+    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
 esac
 
-# Some people use a C++ compiler to compile C.  Since we use `exit',
-# in C++ we need to declare it.  In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
-  choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  for ac_declaration in \
-   '' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -2676,7 +3114,7 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 DEPDIR="${am__leading_dot}deps"
 
-          ac_config_commands="$ac_config_commands depfiles"
+ac_config_commands="$ac_config_commands depfiles"
 
 
 am_make=${MAKE-make}
@@ -2686,8 +3124,8 @@
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
 am__include="#"
 am__quote=
 _am_result=none
@@ -2714,15 +3152,15 @@
 fi
 
 
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
+{ echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6; }
 rm -f confinc confmf
 
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+# Check whether --enable-dependency-tracking was given.
 if test "${enable_dependency_tracking+set}" = set; then
-  enableval="$enable_dependency_tracking"
+  enableval=$enable_dependency_tracking;
+fi
 
-fi;
 if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
@@ -2742,8 +3180,8 @@
 
 depcc="$CC"   am_compiler_list=
 
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2832,8 +3270,8 @@
 fi
 
 fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
 
@@ -2856,8 +3294,8 @@
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -2891,24 +3329,22 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   :
 else
   echo "$as_me: failed program was:" >&5
@@ -2917,9 +3353,10 @@
   # Broken: fails on valid input.
 continue
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether non-existent headers
+  # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -2929,24 +3366,22 @@
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   # Broken: success on invalid input.
 continue
 else
@@ -2957,6 +3392,7 @@
 ac_preproc_ok=:
 break
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
 done
@@ -2974,8 +3410,8 @@
 else
   ac_cv_prog_CPP=$CPP
 fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
+{ echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6; }
 ac_preproc_ok=false
 for ac_c_preproc_warn_flag in '' yes
 do
@@ -2998,24 +3434,22 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   :
 else
   echo "$as_me: failed program was:" >&5
@@ -3024,9 +3458,10 @@
   # Broken: fails on valid input.
 continue
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether non-existent headers
+  # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -3036,24 +3471,22 @@
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   # Broken: success on invalid input.
 continue
 else
@@ -3064,6 +3497,7 @@
 ac_preproc_ok=:
 break
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
 done
@@ -3086,23 +3520,170 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # Extract the first word of "grep ggrep" to use in msg output
+if test -z "$GREP"; then
+set dummy grep ggrep; ac_prog_name=$2
+if test "${ac_cv_path_GREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_path_GREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in grep ggrep; do
+  for ac_exec_ext in '' $ac_executable_extensions; do
+    ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+    { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+    # Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+    $ac_path_GREP_found && break 3
+  done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+GREP="$ac_cv_path_GREP"
+if test -z "$GREP"; then
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     # Extract the first word of "egrep" to use in msg output
+if test -z "$EGREP"; then
+set dummy egrep; ac_prog_name=$2
+if test "${ac_cv_path_EGREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_path_EGREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in egrep; do
+  for ac_exec_ext in '' $ac_executable_extensions; do
+    ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+    { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+    # Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
     fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+    $ac_path_EGREP_found && break 3
+  done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+EGREP="$ac_cv_path_EGREP"
+if test -z "$EGREP"; then
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+
+   fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
 
 
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
 if test "${ac_cv_header_stdc+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3126,34 +3707,31 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_header_stdc=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_header_stdc=no
+	ac_cv_header_stdc=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
@@ -3209,6 +3787,7 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 #include <ctype.h>
+#include <stdlib.h>
 #if ((' ' & 0x0FF) == 0x020)
 # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
 # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
@@ -3228,18 +3807,27 @@
   for (i = 0; i < 256; i++)
     if (XOR (islower (i), ISLOWER (i))
 	|| toupper (i) != TOUPPER (i))
-      exit(2);
-  exit (0);
+      return 2;
+  return 0;
 }
 _ACEOF
 rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -3252,12 +3840,14 @@
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
+
+
 fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
 if test $ac_cv_header_stdc = yes; then
 
 cat >>confdefs.h <<\_ACEOF
@@ -3280,9 +3870,9 @@
 		  inttypes.h stdint.h unistd.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -3296,37 +3886,35 @@
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   eval "$as_ac_Header=yes"
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-eval "$as_ac_Header=no"
+	eval "$as_ac_Header=no"
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 if test `eval echo '${'$as_ac_Header'}'` = yes; then
   cat >>confdefs.h <<_ACEOF
 #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
@@ -3337,8 +3925,8 @@
 done
 
 
-echo "$as_me:$LINENO: checking for unsigned char" >&5
-echo $ECHO_N "checking for unsigned char... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for unsigned char" >&5
+echo $ECHO_N "checking for unsigned char... $ECHO_C" >&6; }
 if test "${ac_cv_type_unsigned_char+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3349,60 +3937,57 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+typedef unsigned char ac__type_new_;
 int
 main ()
 {
-if ((unsigned char *) 0)
+if ((ac__type_new_ *) 0)
   return 0;
-if (sizeof (unsigned char))
+if (sizeof (ac__type_new_))
   return 0;
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_type_unsigned_char=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_type_unsigned_char=no
+	ac_cv_type_unsigned_char=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_char" >&5
-echo "${ECHO_T}$ac_cv_type_unsigned_char" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_char" >&5
+echo "${ECHO_T}$ac_cv_type_unsigned_char" >&6; }
 
-echo "$as_me:$LINENO: checking size of unsigned char" >&5
-echo $ECHO_N "checking size of unsigned char... $ECHO_C" >&6
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ echo "$as_me:$LINENO: checking size of unsigned char" >&5
+echo $ECHO_N "checking size of unsigned char... $ECHO_C" >&6; }
 if test "${ac_cv_sizeof_unsigned_char+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if test "$ac_cv_type_unsigned_char" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
   if test "$cross_compiling" = yes; then
   # Depending upon the size, compute the lo and hi bounds.
 cat >conftest.$ac_ext <<_ACEOF
@@ -3412,10 +3997,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned char ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned char))) >= 0)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
 test_array [0] = 0
 
   ;
@@ -3423,26 +4009,22 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_lo=0 ac_mid=0
   while :; do
     cat >conftest.$ac_ext <<_ACEOF
@@ -3452,10 +4034,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned char ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned char))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
 test_array [0] = 0
 
   ;
@@ -3463,55 +4046,53 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_hi=$ac_mid; break
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_lo=`expr $ac_mid + 1`
-		    if test $ac_lo -le $ac_mid; then
-		      ac_lo= ac_hi=
-		      break
-		    fi
-		    ac_mid=`expr 2 '*' $ac_mid + 1`
+	ac_lo=`expr $ac_mid + 1`
+			if test $ac_lo -le $ac_mid; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			ac_mid=`expr 2 '*' $ac_mid + 1`
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   done
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-cat >conftest.$ac_ext <<_ACEOF
+	cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned char ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned char))) < 0)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
 test_array [0] = 0
 
   ;
@@ -3519,26 +4100,22 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_hi=-1 ac_mid=-1
   while :; do
     cat >conftest.$ac_ext <<_ACEOF
@@ -3548,10 +4125,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned char ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned char))) >= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
 test_array [0] = 0
 
   ;
@@ -3559,49 +4137,48 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_lo=$ac_mid; break
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_hi=`expr '(' $ac_mid ')' - 1`
-		       if test $ac_mid -le $ac_hi; then
-			 ac_lo= ac_hi=
-			 break
-		       fi
-		       ac_mid=`expr 2 '*' $ac_mid`
+	ac_hi=`expr '(' $ac_mid ')' - 1`
+			if test $ac_mid -le $ac_hi; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			ac_mid=`expr 2 '*' $ac_mid`
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   done
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_lo= ac_hi=
+	ac_lo= ac_hi=
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 # Binary search between lo and hi bounds.
 while test "x$ac_lo" != "x$ac_hi"; do
   ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
@@ -3612,10 +4189,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned char ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned char))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
 test_array [0] = 0
 
   ;
@@ -3623,49 +4201,45 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_hi=$ac_mid
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_lo=`expr '(' $ac_mid ')' + 1`
+	ac_lo=`expr '(' $ac_mid ')' + 1`
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 done
 case $ac_lo in
 ?*) ac_cv_sizeof_unsigned_char=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned char), 77
+'') if test "$ac_cv_type_unsigned_char" = yes; then
+     { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned char)
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (unsigned char), 77
+echo "$as_me: error: cannot compute sizeof (unsigned char)
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
+   { (exit 77); exit 77; }; }
+   else
+     ac_cv_sizeof_unsigned_char=0
+   fi ;;
 esac
 else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
-echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
-   { (exit 1); exit 1; }; }
-else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -3673,8 +4247,9 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
-long longval () { return (long) (sizeof (unsigned char)); }
-unsigned long ulongval () { return (long) (sizeof (unsigned char)); }
+   typedef unsigned char ac__type_sizeof_;
+static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
+static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
 #include <stdio.h>
 #include <stdlib.h>
 int
@@ -3683,35 +4258,44 @@
 
   FILE *f = fopen ("conftest.val", "w");
   if (! f)
-    exit (1);
-  if (((long) (sizeof (unsigned char))) < 0)
+    return 1;
+  if (((long int) (sizeof (ac__type_sizeof_))) < 0)
     {
-      long i = longval ();
-      if (i != ((long) (sizeof (unsigned char))))
-	exit (1);
+      long int i = longval ();
+      if (i != ((long int) (sizeof (ac__type_sizeof_))))
+	return 1;
       fprintf (f, "%ld\n", i);
     }
   else
     {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (unsigned char))))
-	exit (1);
+      unsigned long int i = ulongval ();
+      if (i != ((long int) (sizeof (ac__type_sizeof_))))
+	return 1;
       fprintf (f, "%lu\n", i);
     }
-  exit (ferror (f) || fclose (f) != 0);
+  return ferror (f) || fclose (f) != 0;
 
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -3722,29 +4306,32 @@
 sed 's/^/| /' conftest.$ac_ext >&5
 
 ( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned char), 77
+if test "$ac_cv_type_unsigned_char" = yes; then
+     { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned char)
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (unsigned char), 77
+echo "$as_me: error: cannot compute sizeof (unsigned char)
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+   { (exit 77); exit 77; }; }
+   else
+     ac_cv_sizeof_unsigned_char=0
+   fi
 fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 rm -f conftest.val
-else
-  ac_cv_sizeof_unsigned_char=0
-fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_char" >&5
-echo "${ECHO_T}$ac_cv_sizeof_unsigned_char" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_char" >&5
+echo "${ECHO_T}$ac_cv_sizeof_unsigned_char" >&6; }
+
+
+
 cat >>confdefs.h <<_ACEOF
 #define SIZEOF_UNSIGNED_CHAR $ac_cv_sizeof_unsigned_char
 _ACEOF
 
 
-echo "$as_me:$LINENO: checking for unsigned short" >&5
-echo $ECHO_N "checking for unsigned short... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for unsigned short" >&5
+echo $ECHO_N "checking for unsigned short... $ECHO_C" >&6; }
 if test "${ac_cv_type_unsigned_short+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3755,60 +4342,57 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+typedef unsigned short ac__type_new_;
 int
 main ()
 {
-if ((unsigned short *) 0)
+if ((ac__type_new_ *) 0)
   return 0;
-if (sizeof (unsigned short))
+if (sizeof (ac__type_new_))
   return 0;
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_type_unsigned_short=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_type_unsigned_short=no
+	ac_cv_type_unsigned_short=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_short" >&5
-echo "${ECHO_T}$ac_cv_type_unsigned_short" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_short" >&5
+echo "${ECHO_T}$ac_cv_type_unsigned_short" >&6; }
 
-echo "$as_me:$LINENO: checking size of unsigned short" >&5
-echo $ECHO_N "checking size of unsigned short... $ECHO_C" >&6
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ echo "$as_me:$LINENO: checking size of unsigned short" >&5
+echo $ECHO_N "checking size of unsigned short... $ECHO_C" >&6; }
 if test "${ac_cv_sizeof_unsigned_short+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if test "$ac_cv_type_unsigned_short" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
   if test "$cross_compiling" = yes; then
   # Depending upon the size, compute the lo and hi bounds.
 cat >conftest.$ac_ext <<_ACEOF
@@ -3818,10 +4402,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned short ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned short))) >= 0)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
 test_array [0] = 0
 
   ;
@@ -3829,26 +4414,22 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_lo=0 ac_mid=0
   while :; do
     cat >conftest.$ac_ext <<_ACEOF
@@ -3858,10 +4439,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned short ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned short))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
 test_array [0] = 0
 
   ;
@@ -3869,55 +4451,53 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_hi=$ac_mid; break
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_lo=`expr $ac_mid + 1`
-		    if test $ac_lo -le $ac_mid; then
-		      ac_lo= ac_hi=
-		      break
-		    fi
-		    ac_mid=`expr 2 '*' $ac_mid + 1`
+	ac_lo=`expr $ac_mid + 1`
+			if test $ac_lo -le $ac_mid; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			ac_mid=`expr 2 '*' $ac_mid + 1`
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   done
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-cat >conftest.$ac_ext <<_ACEOF
+	cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned short ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned short))) < 0)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
 test_array [0] = 0
 
   ;
@@ -3925,26 +4505,22 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_hi=-1 ac_mid=-1
   while :; do
     cat >conftest.$ac_ext <<_ACEOF
@@ -3954,10 +4530,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned short ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned short))) >= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
 test_array [0] = 0
 
   ;
@@ -3965,49 +4542,48 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_lo=$ac_mid; break
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_hi=`expr '(' $ac_mid ')' - 1`
-		       if test $ac_mid -le $ac_hi; then
-			 ac_lo= ac_hi=
-			 break
-		       fi
-		       ac_mid=`expr 2 '*' $ac_mid`
+	ac_hi=`expr '(' $ac_mid ')' - 1`
+			if test $ac_mid -le $ac_hi; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			ac_mid=`expr 2 '*' $ac_mid`
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   done
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_lo= ac_hi=
+	ac_lo= ac_hi=
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 # Binary search between lo and hi bounds.
 while test "x$ac_lo" != "x$ac_hi"; do
   ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
@@ -4018,10 +4594,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned short ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned short))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
 test_array [0] = 0
 
   ;
@@ -4029,49 +4606,45 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_hi=$ac_mid
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_lo=`expr '(' $ac_mid ')' + 1`
+	ac_lo=`expr '(' $ac_mid ')' + 1`
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 done
 case $ac_lo in
 ?*) ac_cv_sizeof_unsigned_short=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned short), 77
+'') if test "$ac_cv_type_unsigned_short" = yes; then
+     { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned short)
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (unsigned short), 77
+echo "$as_me: error: cannot compute sizeof (unsigned short)
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
+   { (exit 77); exit 77; }; }
+   else
+     ac_cv_sizeof_unsigned_short=0
+   fi ;;
 esac
 else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
-echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
-   { (exit 1); exit 1; }; }
-else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -4079,8 +4652,9 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
-long longval () { return (long) (sizeof (unsigned short)); }
-unsigned long ulongval () { return (long) (sizeof (unsigned short)); }
+   typedef unsigned short ac__type_sizeof_;
+static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
+static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
 #include <stdio.h>
 #include <stdlib.h>
 int
@@ -4089,35 +4663,44 @@
 
   FILE *f = fopen ("conftest.val", "w");
   if (! f)
-    exit (1);
-  if (((long) (sizeof (unsigned short))) < 0)
+    return 1;
+  if (((long int) (sizeof (ac__type_sizeof_))) < 0)
     {
-      long i = longval ();
-      if (i != ((long) (sizeof (unsigned short))))
-	exit (1);
+      long int i = longval ();
+      if (i != ((long int) (sizeof (ac__type_sizeof_))))
+	return 1;
       fprintf (f, "%ld\n", i);
     }
   else
     {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (unsigned short))))
-	exit (1);
+      unsigned long int i = ulongval ();
+      if (i != ((long int) (sizeof (ac__type_sizeof_))))
+	return 1;
       fprintf (f, "%lu\n", i);
     }
-  exit (ferror (f) || fclose (f) != 0);
+  return ferror (f) || fclose (f) != 0;
 
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4128,29 +4711,32 @@
 sed 's/^/| /' conftest.$ac_ext >&5
 
 ( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned short), 77
+if test "$ac_cv_type_unsigned_short" = yes; then
+     { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned short)
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (unsigned short), 77
+echo "$as_me: error: cannot compute sizeof (unsigned short)
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+   { (exit 77); exit 77; }; }
+   else
+     ac_cv_sizeof_unsigned_short=0
+   fi
 fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 rm -f conftest.val
-else
-  ac_cv_sizeof_unsigned_short=0
 fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_short" >&5
-echo "${ECHO_T}$ac_cv_sizeof_unsigned_short" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_short" >&5
+echo "${ECHO_T}$ac_cv_sizeof_unsigned_short" >&6; }
+
+
+
 cat >>confdefs.h <<_ACEOF
 #define SIZEOF_UNSIGNED_SHORT $ac_cv_sizeof_unsigned_short
 _ACEOF
 
 
-echo "$as_me:$LINENO: checking for unsigned int" >&5
-echo $ECHO_N "checking for unsigned int... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for unsigned int" >&5
+echo $ECHO_N "checking for unsigned int... $ECHO_C" >&6; }
 if test "${ac_cv_type_unsigned_int+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4161,60 +4747,57 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+typedef unsigned int ac__type_new_;
 int
 main ()
 {
-if ((unsigned int *) 0)
+if ((ac__type_new_ *) 0)
   return 0;
-if (sizeof (unsigned int))
+if (sizeof (ac__type_new_))
   return 0;
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_type_unsigned_int=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_type_unsigned_int=no
+	ac_cv_type_unsigned_int=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_int" >&5
-echo "${ECHO_T}$ac_cv_type_unsigned_int" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_int" >&5
+echo "${ECHO_T}$ac_cv_type_unsigned_int" >&6; }
 
-echo "$as_me:$LINENO: checking size of unsigned int" >&5
-echo $ECHO_N "checking size of unsigned int... $ECHO_C" >&6
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ echo "$as_me:$LINENO: checking size of unsigned int" >&5
+echo $ECHO_N "checking size of unsigned int... $ECHO_C" >&6; }
 if test "${ac_cv_sizeof_unsigned_int+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if test "$ac_cv_type_unsigned_int" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
   if test "$cross_compiling" = yes; then
   # Depending upon the size, compute the lo and hi bounds.
 cat >conftest.$ac_ext <<_ACEOF
@@ -4224,10 +4807,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned int ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned int))) >= 0)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
 test_array [0] = 0
 
   ;
@@ -4235,26 +4819,22 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_lo=0 ac_mid=0
   while :; do
     cat >conftest.$ac_ext <<_ACEOF
@@ -4264,10 +4844,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned int ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned int))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
 test_array [0] = 0
 
   ;
@@ -4275,55 +4856,53 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_hi=$ac_mid; break
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_lo=`expr $ac_mid + 1`
-		    if test $ac_lo -le $ac_mid; then
-		      ac_lo= ac_hi=
-		      break
-		    fi
-		    ac_mid=`expr 2 '*' $ac_mid + 1`
+	ac_lo=`expr $ac_mid + 1`
+			if test $ac_lo -le $ac_mid; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			ac_mid=`expr 2 '*' $ac_mid + 1`
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   done
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-cat >conftest.$ac_ext <<_ACEOF
+	cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned int ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned int))) < 0)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
 test_array [0] = 0
 
   ;
@@ -4331,26 +4910,22 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_hi=-1 ac_mid=-1
   while :; do
     cat >conftest.$ac_ext <<_ACEOF
@@ -4360,10 +4935,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned int ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned int))) >= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
 test_array [0] = 0
 
   ;
@@ -4371,49 +4947,48 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_lo=$ac_mid; break
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_hi=`expr '(' $ac_mid ')' - 1`
-		       if test $ac_mid -le $ac_hi; then
-			 ac_lo= ac_hi=
-			 break
-		       fi
-		       ac_mid=`expr 2 '*' $ac_mid`
+	ac_hi=`expr '(' $ac_mid ')' - 1`
+			if test $ac_mid -le $ac_hi; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			ac_mid=`expr 2 '*' $ac_mid`
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   done
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_lo= ac_hi=
+	ac_lo= ac_hi=
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 # Binary search between lo and hi bounds.
 while test "x$ac_lo" != "x$ac_hi"; do
   ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
@@ -4424,10 +4999,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned int ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned int))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
 test_array [0] = 0
 
   ;
@@ -4435,49 +5011,45 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_hi=$ac_mid
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_lo=`expr '(' $ac_mid ')' + 1`
+	ac_lo=`expr '(' $ac_mid ')' + 1`
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 done
 case $ac_lo in
 ?*) ac_cv_sizeof_unsigned_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned int), 77
+'') if test "$ac_cv_type_unsigned_int" = yes; then
+     { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned int)
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (unsigned int), 77
+echo "$as_me: error: cannot compute sizeof (unsigned int)
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
+   { (exit 77); exit 77; }; }
+   else
+     ac_cv_sizeof_unsigned_int=0
+   fi ;;
 esac
 else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
-echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
-   { (exit 1); exit 1; }; }
-else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -4485,8 +5057,9 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
-long longval () { return (long) (sizeof (unsigned int)); }
-unsigned long ulongval () { return (long) (sizeof (unsigned int)); }
+   typedef unsigned int ac__type_sizeof_;
+static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
+static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
 #include <stdio.h>
 #include <stdlib.h>
 int
@@ -4495,35 +5068,44 @@
 
   FILE *f = fopen ("conftest.val", "w");
   if (! f)
-    exit (1);
-  if (((long) (sizeof (unsigned int))) < 0)
+    return 1;
+  if (((long int) (sizeof (ac__type_sizeof_))) < 0)
     {
-      long i = longval ();
-      if (i != ((long) (sizeof (unsigned int))))
-	exit (1);
+      long int i = longval ();
+      if (i != ((long int) (sizeof (ac__type_sizeof_))))
+	return 1;
       fprintf (f, "%ld\n", i);
     }
   else
     {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (unsigned int))))
-	exit (1);
+      unsigned long int i = ulongval ();
+      if (i != ((long int) (sizeof (ac__type_sizeof_))))
+	return 1;
       fprintf (f, "%lu\n", i);
     }
-  exit (ferror (f) || fclose (f) != 0);
+  return ferror (f) || fclose (f) != 0;
 
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4534,29 +5116,32 @@
 sed 's/^/| /' conftest.$ac_ext >&5
 
 ( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned int), 77
+if test "$ac_cv_type_unsigned_int" = yes; then
+     { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned int)
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (unsigned int), 77
+echo "$as_me: error: cannot compute sizeof (unsigned int)
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+   { (exit 77); exit 77; }; }
+   else
+     ac_cv_sizeof_unsigned_int=0
+   fi
 fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 rm -f conftest.val
-else
-  ac_cv_sizeof_unsigned_int=0
-fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_unsigned_int" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_int" >&5
+echo "${ECHO_T}$ac_cv_sizeof_unsigned_int" >&6; }
+
+
+
 cat >>confdefs.h <<_ACEOF
 #define SIZEOF_UNSIGNED_INT $ac_cv_sizeof_unsigned_int
 _ACEOF
 
 
-echo "$as_me:$LINENO: checking for unsigned long" >&5
-echo $ECHO_N "checking for unsigned long... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for unsigned long" >&5
+echo $ECHO_N "checking for unsigned long... $ECHO_C" >&6; }
 if test "${ac_cv_type_unsigned_long+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4567,60 +5152,57 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+typedef unsigned long ac__type_new_;
 int
 main ()
 {
-if ((unsigned long *) 0)
+if ((ac__type_new_ *) 0)
   return 0;
-if (sizeof (unsigned long))
+if (sizeof (ac__type_new_))
   return 0;
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_type_unsigned_long=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_type_unsigned_long=no
+	ac_cv_type_unsigned_long=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_long" >&5
-echo "${ECHO_T}$ac_cv_type_unsigned_long" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_long" >&5
+echo "${ECHO_T}$ac_cv_type_unsigned_long" >&6; }
 
-echo "$as_me:$LINENO: checking size of unsigned long" >&5
-echo $ECHO_N "checking size of unsigned long... $ECHO_C" >&6
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ echo "$as_me:$LINENO: checking size of unsigned long" >&5
+echo $ECHO_N "checking size of unsigned long... $ECHO_C" >&6; }
 if test "${ac_cv_sizeof_unsigned_long+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if test "$ac_cv_type_unsigned_long" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
   if test "$cross_compiling" = yes; then
   # Depending upon the size, compute the lo and hi bounds.
 cat >conftest.$ac_ext <<_ACEOF
@@ -4630,10 +5212,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned long ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) >= 0)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
 test_array [0] = 0
 
   ;
@@ -4641,26 +5224,22 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_lo=0 ac_mid=0
   while :; do
     cat >conftest.$ac_ext <<_ACEOF
@@ -4670,10 +5249,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned long ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
 test_array [0] = 0
 
   ;
@@ -4681,55 +5261,53 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_hi=$ac_mid; break
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_lo=`expr $ac_mid + 1`
-		    if test $ac_lo -le $ac_mid; then
-		      ac_lo= ac_hi=
-		      break
-		    fi
-		    ac_mid=`expr 2 '*' $ac_mid + 1`
+	ac_lo=`expr $ac_mid + 1`
+			if test $ac_lo -le $ac_mid; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			ac_mid=`expr 2 '*' $ac_mid + 1`
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   done
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-cat >conftest.$ac_ext <<_ACEOF
+	cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned long ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) < 0)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
 test_array [0] = 0
 
   ;
@@ -4737,26 +5315,22 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_hi=-1 ac_mid=-1
   while :; do
     cat >conftest.$ac_ext <<_ACEOF
@@ -4766,10 +5340,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned long ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) >= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
 test_array [0] = 0
 
   ;
@@ -4777,49 +5352,48 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_lo=$ac_mid; break
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_hi=`expr '(' $ac_mid ')' - 1`
-		       if test $ac_mid -le $ac_hi; then
-			 ac_lo= ac_hi=
-			 break
-		       fi
-		       ac_mid=`expr 2 '*' $ac_mid`
+	ac_hi=`expr '(' $ac_mid ')' - 1`
+			if test $ac_mid -le $ac_hi; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			ac_mid=`expr 2 '*' $ac_mid`
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   done
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_lo= ac_hi=
+	ac_lo= ac_hi=
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 # Binary search between lo and hi bounds.
 while test "x$ac_lo" != "x$ac_hi"; do
   ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
@@ -4830,10 +5404,11 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+   typedef unsigned long ac__type_sizeof_;
 int
 main ()
 {
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
 test_array [0] = 0
 
   ;
@@ -4841,49 +5416,45 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_hi=$ac_mid
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_lo=`expr '(' $ac_mid ')' + 1`
+	ac_lo=`expr '(' $ac_mid ')' + 1`
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 done
 case $ac_lo in
 ?*) ac_cv_sizeof_unsigned_long=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long), 77
+'') if test "$ac_cv_type_unsigned_long" = yes; then
+     { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long)
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (unsigned long), 77
+echo "$as_me: error: cannot compute sizeof (unsigned long)
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
+   { (exit 77); exit 77; }; }
+   else
+     ac_cv_sizeof_unsigned_long=0
+   fi ;;
 esac
 else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
-echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
-   { (exit 1); exit 1; }; }
-else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -4891,8 +5462,9 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
-long longval () { return (long) (sizeof (unsigned long)); }
-unsigned long ulongval () { return (long) (sizeof (unsigned long)); }
+   typedef unsigned long ac__type_sizeof_;
+static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
+static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
 #include <stdio.h>
 #include <stdlib.h>
 int
@@ -4901,35 +5473,44 @@
 
   FILE *f = fopen ("conftest.val", "w");
   if (! f)
-    exit (1);
-  if (((long) (sizeof (unsigned long))) < 0)
+    return 1;
+  if (((long int) (sizeof (ac__type_sizeof_))) < 0)
     {
-      long i = longval ();
-      if (i != ((long) (sizeof (unsigned long))))
-	exit (1);
+      long int i = longval ();
+      if (i != ((long int) (sizeof (ac__type_sizeof_))))
+	return 1;
       fprintf (f, "%ld\n", i);
     }
   else
     {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (unsigned long))))
-	exit (1);
+      unsigned long int i = ulongval ();
+      if (i != ((long int) (sizeof (ac__type_sizeof_))))
+	return 1;
       fprintf (f, "%lu\n", i);
     }
-  exit (ferror (f) || fclose (f) != 0);
+  return ferror (f) || fclose (f) != 0;
 
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4940,22 +5521,25 @@
 sed 's/^/| /' conftest.$ac_ext >&5
 
 ( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long), 77
+if test "$ac_cv_type_unsigned_long" = yes; then
+     { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long)
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (unsigned long), 77
+echo "$as_me: error: cannot compute sizeof (unsigned long)
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+   { (exit 77); exit 77; }; }
+   else
+     ac_cv_sizeof_unsigned_long=0
+   fi
 fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 rm -f conftest.val
-else
-  ac_cv_sizeof_unsigned_long=0
 fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_long" >&5
-echo "${ECHO_T}$ac_cv_sizeof_unsigned_long" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_long" >&5
+echo "${ECHO_T}$ac_cv_sizeof_unsigned_long" >&6; }
+
+
+
 cat >>confdefs.h <<_ACEOF
 #define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long
 _ACEOF
@@ -4970,8 +5554,8 @@
 # We have to trust the linker not to mess things up... (It should not
 # pull in anything if we don't refer to anything in the lib).
 
-echo "$as_me:$LINENO: checking for tgetent in -ltermcap" >&5
-echo $ECHO_N "checking for tgetent in -ltermcap... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for tgetent in -ltermcap" >&5
+echo $ECHO_N "checking for tgetent in -ltermcap... $ECHO_C" >&6; }
 if test "${ac_cv_lib_termcap_tgetent+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4984,55 +5568,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char tgetent ();
 int
 main ()
 {
-tgetent ();
+return tgetent ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_termcap_tgetent=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_termcap_tgetent=no
+	ac_cv_lib_termcap_tgetent=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_termcap_tgetent" >&5
-echo "${ECHO_T}$ac_cv_lib_termcap_tgetent" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_termcap_tgetent" >&5
+echo "${ECHO_T}$ac_cv_lib_termcap_tgetent" >&6; }
 if test $ac_cv_lib_termcap_tgetent = yes; then
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBTERMCAP 1
@@ -5043,8 +5625,8 @@
 fi
 
 
-echo "$as_me:$LINENO: checking for initscr" >&5
-echo $ECHO_N "checking for initscr... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for initscr" >&5
+echo $ECHO_N "checking for initscr... $ECHO_C" >&6; }
 if test "${ac_cv_func_initscr+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5071,73 +5653,65 @@
 
 #undef initscr
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char initscr ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_initscr) || defined (__stub___initscr)
+#if defined __stub_initscr || defined __stub___initscr
 choke me
-#else
-char (*f) () = initscr;
-#endif
-#ifdef __cplusplus
-}
 #endif
 
 int
 main ()
 {
-return f != initscr;
+return initscr ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_func_initscr=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_initscr=no
+	ac_cv_func_initscr=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_initscr" >&5
-echo "${ECHO_T}$ac_cv_func_initscr" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_func_initscr" >&5
+echo "${ECHO_T}$ac_cv_func_initscr" >&6; }
 if test $ac_cv_func_initscr = yes; then
   :
 else
 
-echo "$as_me:$LINENO: checking for initscr in -lncurses" >&5
-echo $ECHO_N "checking for initscr in -lncurses... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for initscr in -lncurses" >&5
+echo $ECHO_N "checking for initscr in -lncurses... $ECHO_C" >&6; }
 if test "${ac_cv_lib_ncurses_initscr+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5150,55 +5724,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char initscr ();
 int
 main ()
 {
-initscr ();
+return initscr ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_ncurses_initscr=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_ncurses_initscr=no
+	ac_cv_lib_ncurses_initscr=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_ncurses_initscr" >&5
-echo "${ECHO_T}$ac_cv_lib_ncurses_initscr" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_ncurses_initscr" >&5
+echo "${ECHO_T}$ac_cv_lib_ncurses_initscr" >&6; }
 if test $ac_cv_lib_ncurses_initscr = yes; then
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBNCURSES 1
@@ -5208,8 +5780,8 @@
 
 else
 
-echo "$as_me:$LINENO: checking for initscr in -lcurses" >&5
-echo $ECHO_N "checking for initscr in -lcurses... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for initscr in -lcurses" >&5
+echo $ECHO_N "checking for initscr in -lcurses... $ECHO_C" >&6; }
 if test "${ac_cv_lib_curses_initscr+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5222,55 +5794,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char initscr ();
 int
 main ()
 {
-initscr ();
+return initscr ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_curses_initscr=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_curses_initscr=no
+	ac_cv_lib_curses_initscr=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_curses_initscr" >&5
-echo "${ECHO_T}$ac_cv_lib_curses_initscr" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_curses_initscr" >&5
+echo "${ECHO_T}$ac_cv_lib_curses_initscr" >&6; }
 if test $ac_cv_lib_curses_initscr = yes; then
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBCURSES 1
@@ -5280,8 +5850,8 @@
 
 else
 
-echo "$as_me:$LINENO: checking for initscr in -lcursesX" >&5
-echo $ECHO_N "checking for initscr in -lcursesX... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for initscr in -lcursesX" >&5
+echo $ECHO_N "checking for initscr in -lcursesX... $ECHO_C" >&6; }
 if test "${ac_cv_lib_cursesX_initscr+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5294,55 +5864,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char initscr ();
 int
 main ()
 {
-initscr ();
+return initscr ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_cursesX_initscr=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_cursesX_initscr=no
+	ac_cv_lib_cursesX_initscr=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_cursesX_initscr" >&5
-echo "${ECHO_T}$ac_cv_lib_cursesX_initscr" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_cursesX_initscr" >&5
+echo "${ECHO_T}$ac_cv_lib_cursesX_initscr" >&6; }
 if test $ac_cv_lib_cursesX_initscr = yes; then
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBCURSESX 1
@@ -5371,9 +5939,9 @@
 for ac_func in attron
 do
 as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
+if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -5399,67 +5967,60 @@
 
 #undef $ac_func
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char $ac_func ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+#if defined __stub_$ac_func || defined __stub___$ac_func
 choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
 #endif
 
 int
 main ()
 {
-return f != $ac_func;
+return $ac_func ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   eval "$as_ac_var=yes"
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-eval "$as_ac_var=no"
+	eval "$as_ac_var=no"
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+ac_res=`eval echo '${'$as_ac_var'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 if test `eval echo '${'$as_ac_var'}'` = yes; then
   cat >>confdefs.h <<_ACEOF
 #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
@@ -5478,18 +6039,19 @@
 for ac_header in ncurses.h ncurses/curses.h curses.h cursesX.h sys/types.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+  { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 else
   # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -5500,40 +6062,37 @@
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_header_compiler=no
+	ac_header_compiler=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
 
 # Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -5542,24 +6101,22 @@
 /* end confdefs.h.  */
 #include <$ac_header>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
@@ -5567,9 +6124,10 @@
 
   ac_header_preproc=no
 fi
+
 rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
 
 # So?  What about this header?
 case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
@@ -5593,25 +6151,19 @@
 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists.  ##
-## ------------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
+
     ;;
 esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   eval "$as_ac_Header=\$ac_header_preproc"
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 
 fi
 if test `eval echo '${'$as_ac_Header'}'` = yes; then
@@ -5627,18 +6179,19 @@
 for ac_header in sys/xti.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+  { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 else
   # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -5649,40 +6202,37 @@
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_header_compiler=no
+	ac_header_compiler=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
 
 # Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -5691,24 +6241,22 @@
 /* end confdefs.h.  */
 #include <$ac_header>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
@@ -5716,9 +6264,10 @@
 
   ac_header_preproc=no
 fi
+
 rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
 
 # So?  What about this header?
 case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
@@ -5742,25 +6291,19 @@
 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists.  ##
-## ------------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
+
     ;;
 esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   eval "$as_ac_Header=\$ac_header_preproc"
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 
 fi
 if test `eval echo '${'$as_ac_Header'}'` = yes; then
@@ -5774,8 +6317,8 @@
 
 
 
-echo "$as_me:$LINENO: checking for floor in -lm" >&5
-echo $ECHO_N "checking for floor in -lm... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for floor in -lm" >&5
+echo $ECHO_N "checking for floor in -lm... $ECHO_C" >&6; }
 if test "${ac_cv_lib_m_floor+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5788,55 +6331,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char floor ();
 int
 main ()
 {
-floor ();
+return floor ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_m_floor=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_m_floor=no
+	ac_cv_lib_m_floor=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_m_floor" >&5
-echo "${ECHO_T}$ac_cv_lib_m_floor" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_m_floor" >&5
+echo "${ECHO_T}$ac_cv_lib_m_floor" >&6; }
 if test $ac_cv_lib_m_floor = yes; then
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBM 1
@@ -5852,39 +6393,39 @@
 
 
 
-# Check whether --with-gtk or --without-gtk was given.
+# Check whether --with-gtk was given.
 if test "${with_gtk+set}" = set; then
-  withval="$with_gtk"
-  WANTS_GTK=$withval
+  withval=$with_gtk; WANTS_GTK=$withval
 else
   WANTS_GTK=yes
-fi;
+fi
 
-# Check whether --enable-gtk2 or --disable-gtk2 was given.
+
+# Check whether --enable-gtk2 was given.
 if test "${enable_gtk2+set}" = set; then
-  enableval="$enable_gtk2"
-  WANTS_GTK2=$enableval
+  enableval=$enable_gtk2; WANTS_GTK2=$enableval
 else
   WANTS_GTK2=no
-fi;
+fi
 
-# Check whether --enable-ipv6 or --disable-ipv6 was given.
+
+# Check whether --enable-ipv6 was given.
 if test "${enable_ipv6+set}" = set; then
-  enableval="$enable_ipv6"
-  WANTS_IPV6=$enableval
+  enableval=$enable_ipv6; WANTS_IPV6=$enableval
 else
   WANTS_IPV6=yes
-fi;
+fi
+
 
 if test "x$WANTS_GTK" = "xyes"; then
 	if test "x$WANTS_GTK2" = "xyes"; then
-                # Check whether --enable-gtktest or --disable-gtktest was given.
+                # Check whether --enable-gtktest was given.
 if test "${enable_gtktest+set}" = set; then
-  enableval="$enable_gtktest"
-
+  enableval=$enable_gtktest;
 else
   enable_gtktest=yes
-fi;
+fi
+
 
   pkg_config_args=gtk+-2.0
   for module in .
@@ -5900,8 +6441,8 @@
 
   # Extract the first word of "pkg-config", so it can be a program name with args.
 set dummy pkg-config; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5916,29 +6457,30 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
   test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
   ;;
 esac
 fi
 PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-
 if test -n "$PKG_CONFIG"; then
-  echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
-echo "${ECHO_T}$PKG_CONFIG" >&6
+  { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
+echo "${ECHO_T}$PKG_CONFIG" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
 
+
   if test x$PKG_CONFIG != xno ; then
     if pkg-config --atleast-pkgconfig-version 0.7 ; then
       :
@@ -5952,8 +6494,8 @@
   fi
 
   min_gtk_version=2.0.0
-  echo "$as_me:$LINENO: checking for GTK+ - version >= $min_gtk_version" >&5
-echo $ECHO_N "checking for GTK+ - version >= $min_gtk_version... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for GTK+ - version >= $min_gtk_version" >&5
+echo $ECHO_N "checking for GTK+ - version >= $min_gtk_version... $ECHO_C" >&6; }
 
   if test x$PKG_CONFIG != xno ; then
     ## don't try to run the test against uninstalled libtool libs
@@ -6067,13 +6609,22 @@
 
 _ACEOF
 rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -6086,20 +6637,22 @@
 ( exit $ac_status )
 no_gtk=yes
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
+
+
        CFLAGS="$ac_save_CFLAGS"
        LIBS="$ac_save_LIBS"
      fi
   fi
   if test "x$no_gtk" = x ; then
-     echo "$as_me:$LINENO: result: yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" >&5
-echo "${ECHO_T}yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" >&6
+     { echo "$as_me:$LINENO: result: yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" >&5
+echo "${ECHO_T}yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" >&6; }
      CFLAGS="$CFLAGS $GTK_CFLAGS"
                            LIBS="$LIBS $GTK_LIBS -lm"
   else
-     echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+     { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
      if test "$PKG_CONFIG" = "no" ; then
        echo "*** A new enough version of pkg-config was not found."
        echo "*** See http://pkgconfig.sourceforge.net"
@@ -6131,26 +6684,23 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
    echo "*** The test program compiled, but did not run. This usually means"
           echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
           echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your"
@@ -6164,10 +6714,11 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
- echo "*** The test program failed to compile or link. See the file config.log for the"
+	 echo "*** The test program failed to compile or link. See the file config.log for the"
           echo "*** exact error that occured. This usually means GTK+ is incorrectly installed."
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
           CFLAGS="$ac_save_CFLAGS"
           LIBS="$ac_save_LIBS"
@@ -6188,326 +6739,15 @@
   rm -f conf.gtktest
 
         else
-
-# Check whether --with-gtk-prefix or --without-gtk-prefix was given.
-if test "${with_gtk_prefix+set}" = set; then
-  withval="$with_gtk_prefix"
-  gtk_config_prefix="$withval"
-else
-  gtk_config_prefix=""
-fi;
-
-# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
-if test "${with_gtk_exec_prefix+set}" = set; then
-  withval="$with_gtk_exec_prefix"
-  gtk_config_exec_prefix="$withval"
-else
-  gtk_config_exec_prefix=""
-fi;
-# Check whether --enable-gtktest or --disable-gtktest was given.
-if test "${enable_gtktest+set}" = set; then
-  enableval="$enable_gtktest"
-
-else
-  enable_gtktest=yes
-fi;
-
-  for module in .
-  do
-      case "$module" in
-         gthread)
-             gtk_config_args="$gtk_config_args gthread"
-         ;;
-      esac
-  done
-
-  if test x$gtk_config_exec_prefix != x ; then
-     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
-     if test x${GTK_CONFIG+set} != xset ; then
-        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
-     fi
-  fi
-  if test x$gtk_config_prefix != x ; then
-     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
-     if test x${GTK_CONFIG+set} != xset ; then
-        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
-     fi
-  fi
-
-  # Extract the first word of "gtk-config", so it can be a program name with args.
-set dummy gtk-config; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_GTK_CONFIG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $GTK_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_GTK_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no"
-  ;;
-esac
-fi
-GTK_CONFIG=$ac_cv_path_GTK_CONFIG
-
-if test -n "$GTK_CONFIG"; then
-  echo "$as_me:$LINENO: result: $GTK_CONFIG" >&5
-echo "${ECHO_T}$GTK_CONFIG" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  min_gtk_version=1.0.0
-  echo "$as_me:$LINENO: checking for GTK - version >= $min_gtk_version" >&5
-echo $ECHO_N "checking for GTK - version >= $min_gtk_version... $ECHO_C" >&6
-  no_gtk=""
-  if test "$GTK_CONFIG" = "no" ; then
-    no_gtk=yes
-  else
-    GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
-    GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
-    gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
-           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
-    gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
-           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
-    gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
-           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
-    if test "x$enable_gtktest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $GTK_CFLAGS"
-      LIBS="$GTK_LIBS $LIBS"
-      rm -f conf.gtktest
-      if test "$cross_compiling" = yes; then
-  echo $ac_n "cross compiling; assumed OK... $ac_c"
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <gtk/gtk.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int
-main ()
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  system ("touch conf.gtktest");
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = g_strdup("$min_gtk_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_gtk_version");
-     exit(1);
-   }
-
-  if ((gtk_major_version != $gtk_config_major_version) ||
-      (gtk_minor_version != $gtk_config_minor_version) ||
-      (gtk_micro_version != $gtk_config_micro_version))
-    {
-      printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
-             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
-             gtk_major_version, gtk_minor_version, gtk_micro_version);
-      printf ("*** was found! If gtk-config was correct, then it is best\n");
-      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
-      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-      printf("*** required on your system.\n");
-      printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
-      printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
-      printf("*** before re-running configure\n");
-    }
-#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
-  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
-	   (gtk_minor_version != GTK_MINOR_VERSION) ||
-           (gtk_micro_version != GTK_MICRO_VERSION))
-    {
-      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
-	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
-      printf("*** library (version %d.%d.%d)\n",
-	     gtk_major_version, gtk_minor_version, gtk_micro_version);
-    }
-#endif /* defined (GTK_MAJOR_VERSION) ... */
-  else
-    {
-      if ((gtk_major_version > major) ||
-        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
-        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
-      {
-        return 0;
-       }
-     else
-      {
-        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
-               gtk_major_version, gtk_minor_version, gtk_micro_version);
-        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
-	       major, minor, micro);
-        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
-        printf("***\n");
-        printf("*** If you have already installed a sufficiently new version, this error\n");
-        printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
-        printf("*** being found. The easiest way to fix this is to remove the old version\n");
-        printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
-        printf("*** correct copy of gtk-config. (In this case, you will have to\n");
-        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-        printf("*** so that the correct libraries are found at run-time))\n");
-      }
-    }
-  return 1;
-}
-
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-no_gtk=yes
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_gtk" = x ; then
-     echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-     CFLAGS="$CFLAGS $GTK_CFLAGS"
-                           LIBS="$LIBS $GTK_LIBS"
-  else
-     echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-     if test "$GTK_CONFIG" = "no" ; then
-       echo "*** The gtk-config script installed by GTK could not be found"
-       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the GTK_CONFIG environment variable to the"
-       echo "*** full path to gtk-config."
-     else
-       if test -f conf.gtktest ; then
-        :
-       else
-          echo "*** Could not run GTK test program, checking why..."
-          CFLAGS="$CFLAGS $GTK_CFLAGS"
-          LIBS="$LIBS $GTK_LIBS"
-          cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <gtk/gtk.h>
-#include <stdio.h>
-
-int
-main ()
-{
- return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding GTK or finding the wrong"
-          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
-          echo "***"
-          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
-          echo "*** came with the system with the command"
-          echo "***"
-          echo "***    rpm --erase --nodeps gtk gtk-devel"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
-          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
-          echo "*** may want to edit the gtk-config script: $GTK_CONFIG"
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     GTK_CFLAGS=""
-     GTK_LIBS=""
-     { echo "$as_me:$LINENO: WARNING: Building without GTK+ display support" >&5
+		AM_PATH_GTK(1.0.0, CFLAGS="$CFLAGS $GTK_CFLAGS"
+                           LIBS="$LIBS $GTK_LIBS",
+                           { echo "$as_me:$LINENO: WARNING: Building without GTK+ display support" >&5
 echo "$as_me: WARNING: Building without GTK+ display support" >&2;}
                            cat >>confdefs.h <<\_ACEOF
 #define NO_GTK 1
 _ACEOF
 
-                           GTK_OBJ=""
-  fi
-
-
-  rm -f conf.gtktest
-
+                           GTK_OBJ="")
 	fi
 else
 	cat >>confdefs.h <<\_ACEOF
@@ -6517,8 +6757,8 @@
 	GTK_OBJ=""
 fi
 
-echo "$as_me:$LINENO: checking for socket" >&5
-echo $ECHO_N "checking for socket... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for socket" >&5
+echo $ECHO_N "checking for socket... $ECHO_C" >&6; }
 if test "${ac_cv_func_socket+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6545,73 +6785,65 @@
 
 #undef socket
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char socket ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_socket) || defined (__stub___socket)
+#if defined __stub_socket || defined __stub___socket
 choke me
-#else
-char (*f) () = socket;
-#endif
-#ifdef __cplusplus
-}
 #endif
 
 int
 main ()
 {
-return f != socket;
+return socket ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_func_socket=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_socket=no
+	ac_cv_func_socket=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_socket" >&5
-echo "${ECHO_T}$ac_cv_func_socket" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_func_socket" >&5
+echo "${ECHO_T}$ac_cv_func_socket" >&6; }
 if test $ac_cv_func_socket = yes; then
   :
 else
 
-echo "$as_me:$LINENO: checking for socket in -lsocket" >&5
-echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for socket in -lsocket" >&5
+echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6; }
 if test "${ac_cv_lib_socket_socket+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6624,55 +6856,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char socket ();
 int
 main ()
 {
-socket ();
+return socket ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_socket_socket=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_socket_socket=no
+	ac_cv_lib_socket_socket=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5
-echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5
+echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6; }
 if test $ac_cv_lib_socket_socket = yes; then
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBSOCKET 1
@@ -6689,8 +6919,8 @@
 fi
 
 
-echo "$as_me:$LINENO: checking for gethostbyname" >&5
-echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for gethostbyname" >&5
+echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6; }
 if test "${ac_cv_func_gethostbyname+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6717,73 +6947,65 @@
 
 #undef gethostbyname
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char gethostbyname ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
+#if defined __stub_gethostbyname || defined __stub___gethostbyname
 choke me
-#else
-char (*f) () = gethostbyname;
-#endif
-#ifdef __cplusplus
-}
 #endif
 
 int
 main ()
 {
-return f != gethostbyname;
+return gethostbyname ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_func_gethostbyname=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_gethostbyname=no
+	ac_cv_func_gethostbyname=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5
-echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6; }
 if test $ac_cv_func_gethostbyname = yes; then
   :
 else
 
-echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5
-echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5
+echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; }
 if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6796,55 +7018,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char gethostbyname ();
 int
 main ()
 {
-gethostbyname ();
+return gethostbyname ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_nsl_gethostbyname=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_nsl_gethostbyname=no
+	ac_cv_lib_nsl_gethostbyname=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5
-echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; }
 if test $ac_cv_lib_nsl_gethostbyname = yes; then
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBNSL 1
@@ -6869,9 +7089,9 @@
 for ac_func in seteuid
 do
 as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
+if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -6897,67 +7117,60 @@
 
 #undef $ac_func
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char $ac_func ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+#if defined __stub_$ac_func || defined __stub___$ac_func
 choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
 #endif
 
 int
 main ()
 {
-return f != $ac_func;
+return $ac_func ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   eval "$as_ac_var=yes"
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-eval "$as_ac_var=no"
+	eval "$as_ac_var=no"
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+ac_res=`eval echo '${'$as_ac_var'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 if test `eval echo '${'$as_ac_var'}'` = yes; then
   cat >>confdefs.h <<_ACEOF
 #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
@@ -6968,8 +7181,8 @@
 
 #  AC_CHECK_FUNC(setuid, , AC_MSG_ERROR (I Need either seteuid or setuid))
 
-echo "$as_me:$LINENO: checking for res_mkquery" >&5
-echo $ECHO_N "checking for res_mkquery... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for res_mkquery" >&5
+echo $ECHO_N "checking for res_mkquery... $ECHO_C" >&6; }
 if test "${ac_cv_func_res_mkquery+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6996,73 +7209,65 @@
 
 #undef res_mkquery
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char res_mkquery ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_res_mkquery) || defined (__stub___res_mkquery)
+#if defined __stub_res_mkquery || defined __stub___res_mkquery
 choke me
-#else
-char (*f) () = res_mkquery;
-#endif
-#ifdef __cplusplus
-}
 #endif
 
 int
 main ()
 {
-return f != res_mkquery;
+return res_mkquery ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_func_res_mkquery=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_res_mkquery=no
+	ac_cv_func_res_mkquery=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_res_mkquery" >&5
-echo "${ECHO_T}$ac_cv_func_res_mkquery" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_func_res_mkquery" >&5
+echo "${ECHO_T}$ac_cv_func_res_mkquery" >&6; }
 if test $ac_cv_func_res_mkquery = yes; then
   :
 else
 
-echo "$as_me:$LINENO: checking for res_mkquery in -lbind" >&5
-echo $ECHO_N "checking for res_mkquery in -lbind... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for res_mkquery in -lbind" >&5
+echo $ECHO_N "checking for res_mkquery in -lbind... $ECHO_C" >&6; }
 if test "${ac_cv_lib_bind_res_mkquery+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -7075,55 +7280,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char res_mkquery ();
 int
 main ()
 {
-res_mkquery ();
+return res_mkquery ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_bind_res_mkquery=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_bind_res_mkquery=no
+	ac_cv_lib_bind_res_mkquery=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_bind_res_mkquery" >&5
-echo "${ECHO_T}$ac_cv_lib_bind_res_mkquery" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_bind_res_mkquery" >&5
+echo "${ECHO_T}$ac_cv_lib_bind_res_mkquery" >&6; }
 if test $ac_cv_lib_bind_res_mkquery = yes; then
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBBIND 1
@@ -7133,8 +7336,8 @@
 
 else
 
-echo "$as_me:$LINENO: checking for res_mkquery in -lresolv" >&5
-echo $ECHO_N "checking for res_mkquery in -lresolv... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for res_mkquery in -lresolv" >&5
+echo $ECHO_N "checking for res_mkquery in -lresolv... $ECHO_C" >&6; }
 if test "${ac_cv_lib_resolv_res_mkquery+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -7147,55 +7350,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char res_mkquery ();
 int
 main ()
 {
-res_mkquery ();
+return res_mkquery ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_resolv_res_mkquery=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_resolv_res_mkquery=no
+	ac_cv_lib_resolv_res_mkquery=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_res_mkquery" >&5
-echo "${ECHO_T}$ac_cv_lib_resolv_res_mkquery" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_res_mkquery" >&5
+echo "${ECHO_T}$ac_cv_lib_resolv_res_mkquery" >&6; }
 if test $ac_cv_lib_resolv_res_mkquery = yes; then
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBRESOLV 1
@@ -7205,8 +7406,8 @@
 
 else
 
-echo "$as_me:$LINENO: checking for __res_mkquery in -lresolv" >&5
-echo $ECHO_N "checking for __res_mkquery in -lresolv... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for __res_mkquery in -lresolv" >&5
+echo $ECHO_N "checking for __res_mkquery in -lresolv... $ECHO_C" >&6; }
 if test "${ac_cv_lib_resolv___res_mkquery+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -7219,55 +7420,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char __res_mkquery ();
 int
 main ()
 {
-__res_mkquery ();
+return __res_mkquery ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_resolv___res_mkquery=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_resolv___res_mkquery=no
+	ac_cv_lib_resolv___res_mkquery=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_resolv___res_mkquery" >&5
-echo "${ECHO_T}$ac_cv_lib_resolv___res_mkquery" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_resolv___res_mkquery" >&5
+echo "${ECHO_T}$ac_cv_lib_resolv___res_mkquery" >&6; }
 if test $ac_cv_lib_resolv___res_mkquery = yes; then
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBRESOLV 1
@@ -7287,10 +7486,14 @@
 
 fi
 
-LIBS="$LIBS -lresolv"
+# This next line would override the just detected-or-not -lresolv.
+# This apparently hurts BSD. And it's bad practise. So it should go.
+# However, it probably didn't get added for nothing..... Holler if
+# removing it hurts your OS.... -- REW
+#LIBS="$LIBS -lresolv"
 
-echo "$as_me:$LINENO: checking for herror" >&5
-echo $ECHO_N "checking for herror... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for herror" >&5
+echo $ECHO_N "checking for herror... $ECHO_C" >&6; }
 if test "${ac_cv_func_herror+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -7317,79 +7520,327 @@
 
 #undef herror
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char herror ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_herror) || defined (__stub___herror)
+#if defined __stub_herror || defined __stub___herror
 choke me
+#endif
+
+int
+main ()
+{
+return herror ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
+  ac_cv_func_herror=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_func_herror=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func_herror" >&5
+echo "${ECHO_T}$ac_cv_func_herror" >&6; }
+if test $ac_cv_func_herror = yes; then
+  :
+else
+  cat >>confdefs.h <<\_ACEOF
+#define NO_HERROR 1
+_ACEOF
+
+fi
+
+{ echo "$as_me:$LINENO: checking for strerror" >&5
+echo $ECHO_N "checking for strerror... $ECHO_C" >&6; }
+if test "${ac_cv_func_strerror+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define strerror to an innocuous variant, in case <limits.h> declares strerror.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define strerror innocuous_strerror
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char strerror (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
 #else
-char (*f) () = herror;
+# include <assert.h>
 #endif
+
+#undef strerror
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
+extern "C"
+#endif
+char strerror ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_strerror || defined __stub___strerror
+choke me
+#endif
+
+int
+main ()
+{
+return strerror ();
+  ;
+  return 0;
 }
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
+  ac_cv_func_strerror=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_func_strerror=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func_strerror" >&5
+echo "${ECHO_T}$ac_cv_func_strerror" >&6; }
+if test $ac_cv_func_strerror = yes; then
+  :
+else
+  cat >>confdefs.h <<\_ACEOF
+#define NO_STRERROR 1
+_ACEOF
+
+fi
+
+
+{ echo "$as_me:$LINENO: checking for getaddrinfo" >&5
+echo $ECHO_N "checking for getaddrinfo... $ECHO_C" >&6; }
+if test "${ac_cv_func_getaddrinfo+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define getaddrinfo to an innocuous variant, in case <limits.h> declares getaddrinfo.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define getaddrinfo innocuous_getaddrinfo
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char getaddrinfo (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef getaddrinfo
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
 #endif
+char getaddrinfo ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_getaddrinfo || defined __stub___getaddrinfo
+choke me
+#endif
+
+int
+main ()
+{
+return getaddrinfo ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
+  ac_cv_func_getaddrinfo=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_func_getaddrinfo=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func_getaddrinfo" >&5
+echo "${ECHO_T}$ac_cv_func_getaddrinfo" >&6; }
+if test $ac_cv_func_getaddrinfo = yes; then
+  if test "$WANTS_IPV6" = "yes"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_IPV6
+_ACEOF
+
+fi
+fi
+
+
+{ echo "$as_me:$LINENO: checking whether errno is declared" >&5
+echo $ECHO_N "checking whether errno is declared... $ECHO_C" >&6; }
+if test "${ac_cv_have_decl_errno+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+#include <errno.h>
+#include <sys/errno.h>
+
 
 int
 main ()
 {
-return f != herror;
+#ifndef errno
+  (void) errno;
+#endif
+
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_herror=yes
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_have_decl_errno=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_herror=no
+	ac_cv_have_decl_errno=no
 fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_herror" >&5
-echo "${ECHO_T}$ac_cv_func_herror" >&6
-if test $ac_cv_func_herror = yes; then
-  :
+{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_errno" >&5
+echo "${ECHO_T}$ac_cv_have_decl_errno" >&6; }
+if test $ac_cv_have_decl_errno = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_ERRNO 1
+_ACEOF
+
+
 else
-  cat >>confdefs.h <<\_ACEOF
-#define NO_HERROR 1
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_ERRNO 0
 _ACEOF
 
+
 fi
 
-echo "$as_me:$LINENO: checking for strerror" >&5
-echo $ECHO_N "checking for strerror... $ECHO_C" >&6
-if test "${ac_cv_func_strerror+set}" = set; then
+
+
+{ echo "$as_me:$LINENO: checking for socklen_t" >&5
+echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6; }
+if test "${ac_cv_type_socklen_t+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -7398,97 +7849,63 @@
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-/* Define strerror to an innocuous variant, in case <limits.h> declares strerror.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define strerror innocuous_strerror
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char strerror (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
 
-#undef strerror
+#include <netinet/in.h>
 
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char strerror ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_strerror) || defined (__stub___strerror)
-choke me
-#else
-char (*f) () = strerror;
-#endif
-#ifdef __cplusplus
-}
-#endif
 
+typedef socklen_t ac__type_new_;
 int
 main ()
 {
-return f != strerror;
+if ((ac__type_new_ *) 0)
+  return 0;
+if (sizeof (ac__type_new_))
+  return 0;
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_strerror=yes
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_type_socklen_t=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_strerror=no
+	ac_cv_type_socklen_t=no
 fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_strerror" >&5
-echo "${ECHO_T}$ac_cv_func_strerror" >&6
-if test $ac_cv_func_strerror = yes; then
-  :
-else
-  cat >>confdefs.h <<\_ACEOF
-#define NO_STRERROR 1
+{ echo "$as_me:$LINENO: result: $ac_cv_type_socklen_t" >&5
+echo "${ECHO_T}$ac_cv_type_socklen_t" >&6; }
+if test $ac_cv_type_socklen_t = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_SOCKLEN_T
 _ACEOF
 
 fi
 
 
-echo "$as_me:$LINENO: checking for getaddrinfo" >&5
-echo $ECHO_N "checking for getaddrinfo... $ECHO_C" >&6
-if test "${ac_cv_func_getaddrinfo+set}" = set; then
+{ echo "$as_me:$LINENO: checking for struct in_addr" >&5
+echo $ECHO_N "checking for struct in_addr... $ECHO_C" >&6; }
+if test "${ac_cv_type_struct_in_addr+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -7497,97 +7914,62 @@
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-/* Define getaddrinfo to an innocuous variant, in case <limits.h> declares getaddrinfo.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define getaddrinfo innocuous_getaddrinfo
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char getaddrinfo (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
 
-#undef getaddrinfo
+#include <netinet/in.h>
 
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char getaddrinfo ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_getaddrinfo) || defined (__stub___getaddrinfo)
-choke me
-#else
-char (*f) () = getaddrinfo;
-#endif
-#ifdef __cplusplus
-}
-#endif
 
+typedef struct in_addr ac__type_new_;
 int
 main ()
 {
-return f != getaddrinfo;
+if ((ac__type_new_ *) 0)
+  return 0;
+if (sizeof (ac__type_new_))
+  return 0;
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_getaddrinfo=yes
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_type_struct_in_addr=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_getaddrinfo=no
+	ac_cv_type_struct_in_addr=no
 fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_getaddrinfo" >&5
-echo "${ECHO_T}$ac_cv_func_getaddrinfo" >&6
-if test $ac_cv_func_getaddrinfo = yes; then
-  if test "$WANTS_IPV6" = "yes"; then
+{ echo "$as_me:$LINENO: result: $ac_cv_type_struct_in_addr" >&5
+echo "${ECHO_T}$ac_cv_type_struct_in_addr" >&6; }
+if test $ac_cv_type_struct_in_addr = yes; then
 
 cat >>confdefs.h <<\_ACEOF
-#define ENABLE_IPV6
+#define HAVE_STRUCT_INADDR
 _ACEOF
 
 fi
-fi
 
 
-echo "$as_me:$LINENO: checking for C flags to get more warnings" >&5
-echo $ECHO_N "checking for C flags to get more warnings... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for C flags to get more warnings" >&5
+echo $ECHO_N "checking for C flags to get more warnings... $ECHO_C" >&6; }
 ac_save_CFLAGS="$CFLAGS"
 if test "x$ac_cv_c_compiler_gnu" = "xyes" ; then
     warning_CFLAGS="-Wall"
@@ -7611,33 +7993,31 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   warning_CFLAGS="-fullwarn"
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
       ;;
 
         sunos*)
@@ -7659,33 +8039,31 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   warning_CFLAGS="-vc"
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
         fi
       ;;
 
@@ -7696,20 +8074,21 @@
 fi
 CFLAGS="$ac_save_CFLAGS"
 if test "$warning_CFLAGS" = "none" ; then
-  echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6
+  { echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6; }
 else
   CFLAGS="$CFLAGS $warning_CFLAGS"
-  echo "$as_me:$LINENO: result: $warning_CFLAGS" >&5
-echo "${ECHO_T}$warning_CFLAGS" >&6
+  { echo "$as_me:$LINENO: result: $warning_CFLAGS" >&5
+echo "${ECHO_T}$warning_CFLAGS" >&6; }
 fi
 
 
 
 
-          ac_config_headers="$ac_config_headers config.h"
+ac_config_headers="$ac_config_headers config.h"
+
+ac_config_files="$ac_config_files Makefile img/Makefile"
 
-                    ac_config_files="$ac_config_files Makefile img/Makefile"
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
@@ -7728,39 +8107,58 @@
 
 # The following way of writing the cache mishandles newlines in values,
 # but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+
   (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       # `set' does not quote correctly, so add quotes (double-quote
       # substitution turns \\\\ into \\, and sed turns \\ into \).
       sed -n \
 	"s/'/'\\\\''/g;
 	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
+      ;; #(
     *)
       # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-} |
+    esac |
+    sort
+) |
   sed '
+     /^ac_cv_env_/b end
      t clear
-     : clear
+     :clear
      s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
      t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    echo "not updating unwritable cache $cache_file"
+    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -7769,32 +8167,18 @@
 # Let make expand exec_prefix.
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[	 ]*$//;
-}'
-fi
-
 DEFS=-DHAVE_CONFIG_H
 
 ac_libobjs=
 ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
 done
 LIBOBJS=$ac_libobjs
 
@@ -7839,17 +8223,45 @@
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -7859,8 +8271,43 @@
 fi
 
 
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
 # Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -7874,18 +8321,19 @@
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    $as_unset $as_var
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
   fi
 done
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -7893,159 +8341,120 @@
 
 
 # Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
+# CDPATH.
+$as_unset CDPATH
 
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
 
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
   as_lineno_1=$LINENO
   as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
 
   # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
   # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
   # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+  chmod +x "$as_me.lineno" ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
 
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
 echo >conf$$.file
 if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
     as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
 elif ln conf$$.file conf$$ 2>/dev/null; then
   as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
@@ -8054,7 +8463,28 @@
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+        test -d "$1/.";
+      else
+	case $1 in
+        -*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -8063,31 +8493,14 @@
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
 exec 6>&1
 
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# Save the log message, to keep $[0] and so on meaningful, and to
 # report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
+# values after options handling.
+ac_log="
 This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+generated by GNU Autoconf 2.61.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -8095,30 +8508,20 @@
   CONFIG_COMMANDS = $CONFIG_COMMANDS
   $ $0 $@
 
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
 _ACEOF
 
+cat >>$CONFIG_STATUS <<_ACEOF
 # Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
 
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
+_ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
-
 ac_cs_usage="\
 \`$as_me' instantiates files from templates according to the
 current configuration.
@@ -8126,7 +8529,7 @@
 Usage: $0 [OPTIONS] [FILE]...
 
   -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
+  -V, --version    print version number and configuration settings, then exit
   -q, --quiet      do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
@@ -8145,19 +8548,21 @@
 $config_commands
 
 Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
 
+_ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
 config.status
-configured by $0, generated by GNU Autoconf 2.59,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.61,
+  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2006 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
 _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
@@ -8168,39 +8573,24 @@
 do
   case $1 in
   --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
-  -*)
+  *)
     ac_option=$1
     ac_optarg=$2
     ac_shift=shift
     ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
   esac
 
   case $ac_option in
   # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
@@ -8210,18 +8600,24 @@
     $ac_shift
     CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
     ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    { echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
+  -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; } ;;
 
-  *) ac_config_targets="$ac_config_targets $1" ;;
+  *) ac_config_targets="$ac_config_targets $1"
+     ac_need_defaults=false ;;
 
   esac
   shift
@@ -8237,38 +8633,50 @@
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  CONFIG_SHELL=$SHELL
+  export CONFIG_SHELL
+  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
 fi
 
 _ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  echo "$ac_log"
+} >&5
 
+_ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 #
-# INIT-COMMANDS section.
+# INIT-COMMANDS
 #
-
 AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
 _ACEOF
 
-
-
 cat >>$CONFIG_STATUS <<\_ACEOF
+
+# Handling of arguments.
 for ac_config_target in $ac_config_targets
 do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "img/Makefile" ) CONFIG_FILES="$CONFIG_FILES img/Makefile" ;;
-  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+  case $ac_config_target in
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "img/Makefile") CONFIG_FILES="$CONFIG_FILES img/Makefile" ;;
+
   *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
   esac
 done
 
+
 # If the user did not use the arguments to specify the items to instantiate,
 # then the envvar interface is used.  Set only those that are not.
 # We use the long form for the default assignment because of an extremely
@@ -8280,333 +8688,398 @@
 fi
 
 # Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
+# simply because there is no reason against having it here, and in addition,
 # creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
   trap '{ (exit 1); exit 1; }' 1 2 13 15
 }
-
 # Create a (secure) tmp directory for tmp files.
 
 {
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
   test -n "$tmp" && test -d "$tmp"
 }  ||
 {
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
 } ||
 {
    echo "$me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
 #
-# CONFIG_FILES section.
+# Set up the sed scripts for CONFIG_FILES section.
 #
 
 # No need to generate the scripts if there are no CONFIG_FILES.
 # This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@CYGPATH_W@,$CYGPATH_W,;t t
-s,@PACKAGE@,$PACKAGE,;t t
-s,@VERSION@,$VERSION,;t t
-s,@ACLOCAL@,$ACLOCAL,;t t
-s,@AUTOCONF@,$AUTOCONF,;t t
-s,@AUTOMAKE@,$AUTOMAKE,;t t
-s,@AUTOHEADER@,$AUTOHEADER,;t t
-s,@MAKEINFO@,$MAKEINFO,;t t
-s,@install_sh@,$install_sh,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@mkdir_p@,$mkdir_p,;t t
-s,@AWK@,$AWK,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@am__leading_dot@,$am__leading_dot,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@am__tar@,$am__tar,;t t
-s,@am__untar@,$am__untar,;t t
-s,@GTK_OBJ@,$GTK_OBJ,;t t
-s,@CURSES_OBJ@,$CURSES_OBJ,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@DEPDIR@,$DEPDIR,;t t
-s,@am__include@,$am__include,;t t
-s,@am__quote@,$am__quote,;t t
-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@CCDEPMODE@,$CCDEPMODE,;t t
-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
-s,@CPP@,$CPP,;t t
-s,@EGREP@,$EGREP,;t t
-s,@PKG_CONFIG@,$PKG_CONFIG,;t t
-s,@GTK_CFLAGS@,$GTK_CFLAGS,;t t
-s,@GTK_LIBS@,$GTK_LIBS,;t t
-s,@GTK_CONFIG@,$GTK_CONFIG,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
+INSTALL_DATA!$INSTALL_DATA$ac_delim
+CYGPATH_W!$CYGPATH_W$ac_delim
+PACKAGE!$PACKAGE$ac_delim
+VERSION!$VERSION$ac_delim
+ACLOCAL!$ACLOCAL$ac_delim
+AUTOCONF!$AUTOCONF$ac_delim
+AUTOMAKE!$AUTOMAKE$ac_delim
+AUTOHEADER!$AUTOHEADER$ac_delim
+MAKEINFO!$MAKEINFO$ac_delim
+install_sh!$install_sh$ac_delim
+STRIP!$STRIP$ac_delim
+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
+mkdir_p!$mkdir_p$ac_delim
+AWK!$AWK$ac_delim
+SET_MAKE!$SET_MAKE$ac_delim
+am__leading_dot!$am__leading_dot$ac_delim
+AMTAR!$AMTAR$ac_delim
+am__tar!$am__tar$ac_delim
+am__untar!$am__untar$ac_delim
+GTK_OBJ!$GTK_OBJ$ac_delim
+CURSES_OBJ!$CURSES_OBJ$ac_delim
+CC!$CC$ac_delim
+CFLAGS!$CFLAGS$ac_delim
+LDFLAGS!$LDFLAGS$ac_delim
+CPPFLAGS!$CPPFLAGS$ac_delim
+ac_ct_CC!$ac_ct_CC$ac_delim
+EXEEXT!$EXEEXT$ac_delim
+OBJEXT!$OBJEXT$ac_delim
+DEPDIR!$DEPDIR$ac_delim
+am__include!$am__include$ac_delim
+am__quote!$am__quote$ac_delim
+AMDEP_TRUE!$AMDEP_TRUE$ac_delim
+AMDEP_FALSE!$AMDEP_FALSE$ac_delim
+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
+CCDEPMODE!$CCDEPMODE$ac_delim
+am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
+am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
+CPP!$CPP$ac_delim
+GREP!$GREP$ac_delim
+EGREP!$EGREP$ac_delim
+PKG_CONFIG!$PKG_CONFIG$ac_delim
+GTK_CFLAGS!$GTK_CFLAGS$ac_delim
+GTK_LIBS!$GTK_LIBS$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
+
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 84; then
+    break
+  elif $ac_last_try; then
+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
-fi # test -n "$CONFIG_FILES"
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+  ac_eof=`expr $ac_eof + 1`
+fi
 
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
 _ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
+_ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
 cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+   { (exit 1); exit 1; }; };;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+   { (exit 1); exit 1; }; };;
+      esac
+      ac_file_inputs="$ac_file_inputs $ac_f"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input="Generated from "`IFS=:
+	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    fi
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin";;
+    esac
+    ;;
   esac
 
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+  ac_dir=`$as_dirname -- "$ac_file" ||
 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
     as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
     done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-
   ac_builddir=.
 
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
   ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
 
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
 
   case $INSTALL in
   [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
   esac
+_ACEOF
 
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+case `sed -n '/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+    s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
 _ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
 cat >>$CONFIG_STATUS <<_ACEOF
   sed "$ac_vpsub
 $extrasub
@@ -8614,248 +9087,130 @@
 cat >>$CONFIG_STATUS <<\_ACEOF
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
-ac_dB='[	 ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
 
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  rm -f "$tmp/stdin"
   case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
+  -) cat "$tmp/out"; rm -f "$tmp/out";;
+  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
   esac
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+_ACEOF
+
+# Transform confdefs.h into a sed script `conftest.defines', that
+# substitutes the proper values into config.h.in to produce config.h.
+rm -f conftest.defines conftest.tail
+# First, append a space to every undef/define line, to ease matching.
+echo 's/$/ /' >conftest.defines
+# Then, protect against being on the right side of a sed subst, or in
+# an unquoted here document, in config.status.  If some macros were
+# called several times there might be several #defines for the same
+# symbol, which is useless.  But do not sort them, since the last
+# AC_DEFINE must be honored.
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
+# NAME is the cpp macro being defined, VALUE is the value it is being given.
+# PARAMS is the parameter list in the macro definition--in most cases, it's
+# just an empty string.
+ac_dA='s,^\\([	 #]*\\)[^	 ]*\\([	 ]*'
+ac_dB='\\)[	 (].*,\\1define\\2'
+ac_dC=' '
+ac_dD=' ,'
 
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 # Do quote $f, to prevent DOS paths from being IFS'd.
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h.  The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status.  Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*\)\(([^)]*)\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless.  Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
+uniq confdefs.h |
+  sed -n '
+	t rset
+	:rset
+	s/^[	 ]*#[	 ]*define[	 ][	 ]*//
+	t ok
+	d
+	:ok
+	s/[\\&,]/\\&/g
+	s/^\('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
+	s/^\('"$ac_word_re"'\)[	 ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
+  ' >>conftest.defines
 
-# This sed command replaces #undef with comments.  This is necessary, for
+# Remove the space that was appended to ease matching.
+# Then replace #undef with comments.  This is necessary, for
 # example, in the case of _POSIX_SOURCE, which is predefined and required
 # on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
+# (The regexp can be short, since the line contains either #define or #undef.)
+echo 's/ $//
+s,^[	 #]*u.*,/* & */,' >>conftest.defines
+
+# Break up conftest.defines:
+ac_max_sed_lines=50
+
+# First sed command is:	 sed -f defines.sed $ac_file_inputs >"$tmp/out1"
+# Second one is:	 sed -f defines.sed "$tmp/out1" >"$tmp/out2"
+# Third one will be:	 sed -f defines.sed "$tmp/out2" >"$tmp/out1"
+# et cetera.
+ac_in='$ac_file_inputs'
+ac_out='"$tmp/out1"'
+ac_nxt='"$tmp/out2"'
 
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo '  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo '  :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
+while :
 do
-  # Write a limited-size here document to $tmp/defines.sed.
-  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#define' lines.
-  echo '/^[	 ]*#[	 ]*define/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
+  # Write a here document:
+    cat >>$CONFIG_STATUS <<_ACEOF
+    # First, check the format of the line:
+    cat >"\$tmp/defines.sed" <<\\CEOF
+/^[	 ]*#[	 ]*undef[	 ][	 ]*$ac_word_re[	 ]*\$/b def
+/^[	 ]*#[	 ]*define[	 ][	 ]*$ac_word_re[(	 ]/b def
+b
+:def
+_ACEOF
+  sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
   echo 'CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
+    sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
+  ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
+  sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
+  grep . conftest.tail >/dev/null || break
   rm -f conftest.defines
   mv conftest.tail conftest.defines
 done
-rm -f conftest.defines
-echo '  fi # grep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
-  # Write a limited-size here document to $tmp/undefs.sed.
-  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#undef'
-  echo '/^[	 ]*#[	 ]*undef/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-  rm -f conftest.undefs
-  mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
+rm -f conftest.defines conftest.tail
 
+echo "ac_result=$ac_in" >>$CONFIG_STATUS
 cat >>$CONFIG_STATUS <<\_ACEOF
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
   if test x"$ac_file" != x-; then
-    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+    echo "/* $configure_input  */" >"$tmp/config.h"
+    cat "$ac_result" >>"$tmp/config.h"
+    if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
       { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
 echo "$as_me: $ac_file is unchanged" >&6;}
     else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-      { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
       rm -f $ac_file
-      mv $tmp/config.h $ac_file
+      mv "$tmp/config.h" $ac_file
     fi
   else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
+    echo "/* $configure_input  */"
+    cat "$ac_result"
   fi
+  rm -f "$tmp/out12"
 # Compute $ac_file's index in $config_headers.
 _am_stamp_count=1
 for _am_header in $config_headers :; do
@@ -8866,135 +9221,39 @@
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
+echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
 $as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X$ac_file : 'X\(//\)[^/]' \| \
 	 X$ac_file : 'X\(//\)$' \| \
-	 X$ac_file : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
 echo X$ac_file |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`/stamp-h$_am_stamp_count
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_dest" : 'X\(//\)[^/]' \| \
-	 X"$ac_dest" : 'X\(//\)$' \| \
-	 X"$ac_dest" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
+  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
+echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
 
 
-  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
-  case $ac_dest in
-    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
   # Strip MF so we end up with the name of the file.
   mf=`echo "$mf" | sed -e 's/:.*$//'`
   # Check whether this is an Automake generated Makefile or not.
@@ -9004,18 +9263,29 @@
   # each Makefile.in and add a new line on top of each file to say so.
   # So let's grep whole file.
   if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`(dirname "$mf") 2>/dev/null ||
+    dirpart=`$as_dirname -- "$mf" ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$mf" : 'X\(//\)[^/]' \| \
 	 X"$mf" : 'X\(//\)$' \| \
-	 X"$mf" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   else
     continue
   fi
@@ -9037,53 +9307,79 @@
        sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
     # Make sure the directory exists.
     test -f "$dirpart/$file" && continue
-    fdir=`(dirname "$file") 2>/dev/null ||
+    fdir=`$as_dirname -- "$file" ||
 $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$file" : 'X\(//\)[^/]' \| \
 	 X"$file" : 'X\(//\)$' \| \
-	 X"$file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    { if $as_mkdir_p; then
-    mkdir -p $dirpart/$fdir
-  else
-    as_dir=$dirpart/$fdir
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    { as_dir=$dirpart/$fdir
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
     as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
     done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-
     # echo "creating $dirpart/$file"
     echo '# dummy' > "$dirpart/$file"
   done
 done
  ;;
+
   esac
-done
-_ACEOF
+done # for ac_tag
 
-cat >>$CONFIG_STATUS <<\_ACEOF
 
 { (exit 0); exit 0; }
 _ACEOF
diff -x .deps -x autom4te.cache -ur mtr-0.72/configure.in mtr-0.73/configure.in
--- mtr-0.72/configure.in	2006-03-24 07:48:28.000000000 +0100
+++ mtr-0.73/configure.in	2006-10-05 09:26:41.000000000 +0200
@@ -1,5 +1,5 @@
 AC_INIT(mtr.c)
-AM_INIT_AUTOMAKE(mtr, 0.72)
+AM_INIT_AUTOMAKE(mtr, 0.73)
 
 
 AC_SUBST(GTK_OBJ)
@@ -89,7 +89,11 @@
   AC_CHECK_LIB(bind, res_mkquery, , 
    AC_CHECK_LIB(resolv, res_mkquery, ,
      AC_CHECK_LIB(resolv, __res_mkquery, , AC_MSG_ERROR(No resolver library found)))))
-LIBS="$LIBS -lresolv"
+# This next line would override the just detected-or-not -lresolv. 
+# This apparently hurts BSD. And it's bad practise. So it should go. 
+# However, it probably didn't get added for nothing..... Holler if
+# removing it hurts your OS.... -- REW
+#LIBS="$LIBS -lresolv"
 
 AC_CHECK_FUNC(herror, , AC_DEFINE(NO_HERROR))
 AC_CHECK_FUNC(strerror, , AC_DEFINE(NO_STRERROR))
@@ -99,6 +103,19 @@
 	AC_DEFINE([ENABLE_IPV6], [], [Define to enable IPv6])
 fi])
 
+AC_CHECK_DECLS(errno, , , [[
+#include <errno.h>
+#include <sys/errno.h>
+]] )
+
+AC_CHECK_TYPE(socklen_t, AC_DEFINE([HAVE_SOCKLEN_T], [], [Define if your system has socklen_t]) , , [[
+#include <netinet/in.h>
+]])
+
+AC_CHECK_TYPE(struct in_addr, AC_DEFINE([HAVE_STRUCT_INADDR], [], [Define if you have struct in_addr]), , [[
+#include <netinet/in.h>
+]])
+
 dnl Add C flags to display more warnings
 AC_MSG_CHECKING(for C flags to get more warnings)
 ac_save_CFLAGS="$CFLAGS"
diff -x .deps -x autom4te.cache -ur mtr-0.72/curses.c mtr-0.73/curses.c
--- mtr-0.72/curses.c	2006-09-29 21:40:09.000000000 +0200
+++ mtr-0.73/curses.c	2008-03-24 20:35:58.000000000 +0100
@@ -19,6 +19,7 @@
 
 #include <config.h>
 #include <strings.h>
+#include <unistd.h>
 
 #ifndef NO_CURSES
 #include <ctype.h>
@@ -93,6 +94,7 @@
 {
   int c = getch();
   int i=0;
+  float f = 0.0;
   char buf[MAXFLD+1];
 
   if(c == 'q')
@@ -169,10 +171,13 @@
       buf[i++] = c;   /* need more checking on 'c' */
     }
     buf[i] = '\0';
-    i = atoi( buf );
 
-    if ( i < 1 ) return ActionNone;
-    WaitTime = (float) i;
+    f = atof( buf );
+
+    if (f <= 0.0) return ActionNone;
+    if (getuid() != 0 && f < 1.0)
+      return ActionNone;
+    WaitTime = f;
 
     return ActionNone;
   }
Only in mtr-0.73: curses.o
diff -x .deps -x autom4te.cache -ur mtr-0.72/display.h mtr-0.73/display.h
--- mtr-0.72/display.h	2005-01-11 09:30:58.000000000 +0100
+++ mtr-0.73/display.h	2006-10-04 09:33:31.000000000 +0200
@@ -19,9 +19,11 @@
 
 #include <netinet/in.h>
 
+/* Don't put a trailing comma in enumeration lists. Some compilers 
+   (notably the one on Irix 5.2) do not like that. -- REW */ 
 enum { ActionNone,  ActionQuit,  ActionReset,  ActionDisplay, 
        ActionClear, ActionPause, ActionResume, ActionDNS, 
-       ActionScrollDown, ActionScrollUp,  };
+       ActionScrollDown, ActionScrollUp  };
 enum { DisplayReport, DisplayCurses, DisplayGTK, DisplaySplit, 
        DisplayRaw,    DisplayXML,    DisplayCSV, DisplayTXT};
 
Only in mtr-0.73: display.o
diff -x .deps -x autom4te.cache -ur mtr-0.72/dns.c mtr-0.73/dns.c
--- mtr-0.72/dns.c	2006-03-26 08:54:11.000000000 +0200
+++ mtr-0.73/dns.c	2007-08-10 18:16:45.000000000 +0200
@@ -32,6 +32,7 @@
 #include <sys/socket.h>
 #include <netinet/in.h>
 #include <arpa/inet.h>
+#define BIND_8_COMPAT
 #include <arpa/nameser.h>
 #include <netdb.h>
 #include <resolv.h>
@@ -54,8 +55,10 @@
 #define strerror(errno) (((errno) >= 0 && (errno) < sys_nerr) ? sys_errlist[errno] : "unlisted error")
 #endif
 
+#if !HAVE_DECL_ERRNO
 /*  Hmm, it seems Irix requires this  */
 extern int errno;
+#endif
 
 extern int af;
 
@@ -160,12 +163,15 @@
    "Resource reference",
 };
 
+
+/* Please don't use a trailing comma in enumerations: It doesn't
+   work on all compilers -- REW */
 enum {
    RR_UNKNOWN,
    RR_QUERY,
    RR_ANSWER,
    RR_AUTHORITY,
-   RR_RESOURCE,
+   RR_RESOURCE
 };
 
 typedef struct {
@@ -230,7 +236,7 @@
    STATE_FAILED,
    STATE_PTRREQ1,
    STATE_PTRREQ2,
-   STATE_PTRREQ3,
+   STATE_PTRREQ3
 };
 
 #define Is_PTR(x) ((x->state == STATE_PTRREQ1) || (x->state == STATE_PTRREQ2) || (x->state == STATE_PTRREQ3))
Only in mtr-0.73: dns.o
Only in mtr-0.73: getopt1.o
Only in mtr-0.73: getopt.o
diff -x .deps -x autom4te.cache -ur mtr-0.72/gtk.c mtr-0.73/gtk.c
--- mtr-0.72/gtk.c	2005-01-11 09:36:49.000000000 +0100
+++ mtr-0.73/gtk.c	2006-10-04 09:30:33.000000000 +0200
@@ -306,8 +306,8 @@
 }
 
 
-//void gtk_set_field_num(GtkCList *List, int row, int ix, char *format, int num) {
-// changed int to dobule byMin
+/*   void gtk_set_field_num(GtkCList *List, int row, int ix, char *format, int num) {
+             changed int to dobule byMin */
 void gtk_set_field_num(GtkCList *List, int row, int ix, char *format, double num) 
 {
   char str[32];
@@ -363,12 +363,12 @@
 
 void gtk_redraw(void)
 {
-  int at  = net_min();	// changed from 0 to net_min for TTL stuff byMin
+  int at  = net_min();	/* changed from 0 to net_min for TTL stuff byMin */
   int max = net_max();
 
   gtk_clist_freeze(GTK_CLIST(ReportBody));
 
-  while(GTK_CLIST(ReportBody)->rows < max -at) {	// byMin
+  while(GTK_CLIST(ReportBody)->rows < max -at) {	/* byMin */
     gtk_clist_append(GTK_CLIST(ReportBody), Report_Text);
   }
 
@@ -376,7 +376,7 @@
     gtk_clist_remove(GTK_CLIST(ReportBody), GTK_CLIST(ReportBody)->rows - 1);
   }
 
-  // for(at=0; at < max; at++) {	// replaced byMin
+  /* for(at=0; at < max; at++) {	 replaced byMin */
   for(; at < max; at++) {
     gtk_update_row(GTK_CLIST(ReportBody), at);
   }
Only in mtr-0.73: gtk.o
Only in mtr-0.73: hello
Only in mtr-0.73: hello.c
Only in mtr-0.73/img: Makefile
diff -x .deps -x autom4te.cache -ur mtr-0.72/img/Makefile.in mtr-0.73/img/Makefile.in
--- mtr-0.72/img/Makefile.in	2006-03-25 07:43:20.000000000 +0100
+++ mtr-0.73/img/Makefile.in	2006-10-05 09:15:58.000000000 +0200
@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
 
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -10,173 +12,266 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
-
-SHELL = @SHELL@
-
+@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
 VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-
 top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
-host_alias = @host_alias@
-host_triplet = @host@
+subdir = img
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
 CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
 CURSES_OBJ = @CURSES_OBJ@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
 GTK_CFLAGS = @GTK_CFLAGS@
 GTK_CONFIG = @GTK_CONFIG@
 GTK_LIBS = @GTK_LIBS@
 GTK_OBJ = @GTK_OBJ@
-HAVE_LIB = @HAVE_LIB@
-LIB = @LIB@
-LTLIB = @LTLIB@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
 PKG_CONFIG = @PKG_CONFIG@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
 VERSION = @VERSION@
-
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
 EXTRA_DIST = mtr_icon.xpm
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES = 
-DIST_COMMON =  Makefile.am Makefile.in
-
+all: all-am
 
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
 .SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu img/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  img/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  img/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
 tags: TAGS
 TAGS:
 
+ctags: CTAGS
+CTAGS:
 
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = img
 
 distdir: $(DISTFILES)
-	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(top_distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
-	cd $(top_srcdir) \
-	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu img/Makefile
-	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
 	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
 	  else \
 	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
 	  fi; \
 	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
 check-am: all-am
 check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
+all-am: Makefile
+installdirs:
+install: install-am
 install-exec: install-exec-am
-
-install-data-am:
 install-data: install-data-am
+uninstall: uninstall-am
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
 
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-generic
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
 
-mostlyclean: mostlyclean-am
+clean-am: clean-generic mostlyclean-am
 
-clean-am:  clean-generic mostlyclean-am
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
 
-clean: clean-am
+dvi: dvi-am
+
+dvi-am:
 
-distclean-am:  distclean-generic clean-am
+html: html-am
 
-distclean: distclean-am
+info: info-am
 
-maintainer-clean-am:  maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
 
 maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
 
-.PHONY: tags distdir info-am info dvi-am dvi check check-am \
-installcheck-am installcheck install-exec-am install-exec \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
+uninstall-am: uninstall-info-am
 
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
Only in mtr-0.73: Makefile
diff -x .deps -x autom4te.cache -ur mtr-0.72/Makefile.in mtr-0.73/Makefile.in
--- mtr-0.72/Makefile.in	2006-09-29 21:41:55.000000000 +0200
+++ mtr-0.73/Makefile.in	2008-04-07 18:32:48.000000000 +0200
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -14,8 +14,6 @@
 
 @SET_MAKE@
 
-SOURCES = $(mtr_SOURCES) $(EXTRA_mtr_SOURCES)
-
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
 VPATH = @srcdir@
@@ -115,8 +113,8 @@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+GREP = @GREP@
 GTK_CFLAGS = @GTK_CFLAGS@
-GTK_CONFIG = @GTK_CONFIG@
 GTK_LIBS = @GTK_LIBS@
 GTK_OBJ = @GTK_OBJ@
 INSTALL_DATA = @INSTALL_DATA@
@@ -142,7 +140,6 @@
 STRIP = @STRIP@
 VERSION = @VERSION@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -153,19 +150,26 @@
 bindir = @bindir@
 build_alias = @build_alias@
 datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host_alias = @host_alias@
+htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
Only in mtr-0.73: mtr
diff -x .deps -x autom4te.cache -ur mtr-0.72/mtr.8 mtr-0.73/mtr.8
--- mtr-0.72/mtr.8	2006-09-29 21:33:06.000000000 +0200
+++ mtr-0.73/mtr.8	2007-05-07 08:10:16.000000000 +0200
@@ -156,6 +156,16 @@
 host names. 
 
 .TP
+.B \-o\ fields\ order
+.TP
+.B \-\-order\ fields\ order
+.br
+Use this option to specify the fields and their order when loading mtr.
+.br
+Example:
+-o "LSD NBAW"
+
+.TP
 .B \-g
 .TP
 .B \-\-gtk
diff -x .deps -x autom4te.cache -ur mtr-0.72/mtr.c mtr-0.73/mtr.c
--- mtr-0.72/mtr.c	2006-09-29 21:38:49.000000000 +0200
+++ mtr-0.73/mtr.c	2008-04-07 18:28:46.000000000 +0200
@@ -68,7 +68,7 @@
 
                                 /* begin ttl windows addByMin */
 int  fstTTL = 1;                /* default start at first hop */
-//int maxTTL = MaxHost-1;       /* max you can go is 255 hops */
+/*int maxTTL = MaxHost-1;  */     /* max you can go is 255 hops */
 int   maxTTL = 30;              /* inline with traceroute */
                                 /* end ttl window stuff. */
 
@@ -330,13 +330,13 @@
   }
 
   /*  Now drop to user permissions  */
-  if (setuid(getuid())) {
+  if (setgid(getgid()) || setuid(getuid())) {
     fprintf (stderr, "mtr: Unable to drop permissions.\n");
     exit(1);
   }
 
   /*  Double check, just in case  */
-  if (geteuid() != getuid()) {
+  if ((geteuid() != getuid()) || (getegid() != getgid())) {
     fprintf (stderr, "mtr: Unable to drop permissions.\n");
     exit(1);
   }
diff -x .deps -x autom4te.cache -ur mtr-0.72/mtr.h mtr-0.73/mtr.h
--- mtr-0.72/mtr.h	2005-01-11 09:36:58.000000000 +0100
+++ mtr-0.73/mtr.h	2006-10-05 10:49:44.000000000 +0200
@@ -39,3 +39,6 @@
 #define UNUSED
 #endif
 
+#ifndef HAVE_SOCKLEN_T
+typedef int socklen_t; 
+#endif
Only in mtr-0.73: mtr.o
diff -x .deps -x autom4te.cache -ur mtr-0.72/net.c mtr-0.73/net.c
--- mtr-0.72/net.c	2006-09-29 21:31:01.000000000 +0200
+++ mtr-0.73/net.c	2006-10-04 09:31:13.000000000 +0200
@@ -96,7 +96,7 @@
   int avg;	/* average:  addByMin */
   int gmean;	/* geometirc mean: addByMin */
   int jitter;	/* current jitter, defined as t1-t0 addByMin */
-//int jbest;	/* min jitter, of cause it is 0, not needed */
+/*int jbest;*/	/* min jitter, of cause it is 0, not needed */
   int javg;	/* avg jitter */
   int jworst;	/* max jitter */
   int jinta;	/* estimated variance,? rfc1889's "Interarrival Jitter" */
@@ -359,7 +359,7 @@
 
   if ( addrcmp( (void *) &(host[index].addr),
 		(void *) &unspec_addr, af ) == 0 ) {
-    // should be out of if as addr can change
+    /* should be out of if as addr can change */
     addrcpy( (void *) &(host[index].addr), addrcopy, af );
     display_rawhost(index, (void *) &(host[index].addr));
 
@@ -627,8 +627,8 @@
   int max;
 
   max = 0;
-  // replacedByMin
-  // for(at = 0; at < MaxHost-2; at++) {
+  /* replacedByMin
+     for(at = 0; at < MaxHost-2; at++) { */
   for(at = 0; at < maxTTL-1; at++) {
     if ( addrcmp( (void *) &(host[at].addr),
                   (void *) remoteaddress, af ) == 0 ) {
@@ -736,12 +736,12 @@
       n_unknown = MaxHost; /* Make sure we drop into "we should restart" */
   }
 
-  if (	// success in reaching target
+  if (	/* success in reaching target */
      ( addrcmp( (void *) &(host[batch_at].addr),
                 (void *) remoteaddress, af ) == 0 ) ||
-      // fail in consecuitive MAX_UNKNOWN_HOSTS (firewall?)
+      /* fail in consecuitive MAX_UNKNOWN_HOSTS (firewall?) */
       (n_unknown > MAX_UNKNOWN_HOSTS) ||
-      // or reach limit 
+      /* or reach limit  */
       (batch_at >= maxTTL-1)) {
     numhosts = batch_at+1;
     batch_at = fstTTL - 1;
Only in mtr-0.73: net.o
diff -x .deps -x autom4te.cache -ur mtr-0.72/NEWS mtr-0.73/NEWS
--- mtr-0.72/NEWS	2006-03-23 06:54:05.000000000 +0100
+++ mtr-0.73/NEWS	2006-09-30 10:27:29.000000000 +0200
@@ -1,4 +1,8 @@
 WHAT'S NEW?
+  v0.72 Fix signed/unsigned bug in IPV6 part
+        improved random packet size behaviour. --REW
+  v0.71 Some IPV6 fixes, introduce packet size cmdline option. 
+        (was already present as a cmdline argument) 
   v0.70 Antinio submitted a cumulative patch containing some
         nice improvements. He also submitted an automake patch
         that causes mtr to no longer compile on my system. I 
Only in mtr-0.73: raw.o
Only in mtr-0.73: report.o
Only in mtr-0.73: select.o
diff -x .deps -x autom4te.cache -ur mtr-0.72/split.c mtr-0.73/split.c
--- mtr-0.72/split.c	2005-01-11 09:34:07.000000000 +0100
+++ mtr-0.73/split.c	2006-11-18 12:06:27.000000000 +0100
@@ -103,13 +103,13 @@
       name = dns_lookup(addr);
       if(name != NULL) {
 	/* May be we should test name's length */
-	sprintf(newLine, "%s %d %d %d %d %d %d", name,
+	snprintf(newLine, sizeof(newLine), "%s %d %d %d %d %d %d", name,
 		net_loss(at),
 		net_returned(at), net_xmit(at),
 		net_best(at) /1000, net_avg(at)/1000, 
 		net_worst(at)/1000);
       } else {
-	sprintf(newLine, "%s %d %d %d %d %d %d", 
+	snprintf(newLine, sizeof(newLine), "%s %d %d %d %d %d %d", 
 		strlongip( addr ),
 		net_loss(at),
 		net_returned(at), net_xmit(at),
Only in mtr-0.73: split.c.orig
Only in mtr-0.73: split.c.rej
Only in mtr-0.73: split.o
Only in mtr-0.73: stamp-h1
diff -x .deps -x autom4te.cache -ur mtr-0.72/TODO mtr-0.73/TODO
--- mtr-0.72/TODO	2004-08-26 09:56:53.000000000 +0200
+++ mtr-0.73/TODO	2007-12-14 12:20:26.000000000 +0100
@@ -61,8 +61,7 @@
   - Show state ("looking up host") while doing the DNS lookup for a new
     host.
 
-  - Read environment variable "MTR_DEFAULTS" as a commandline before
-    parsing the commandline.  -- DONE. (ok it's MTR_OPTIONS.)
+  - to have a choice of icmp, tcp, and udp pings. -- Matt Martini
 
   - Autoconf 2.13 has a neat function that can be used to find the 
     res_init function: 
@@ -86,6 +85,12 @@
     hops from the host I'm monitoring, MTR wastes a lot of screen real
     estate. -- Jacob Elder
 
+  - Colors in the curses version. -- Amix
+
+  - If we run a mtr to monitor a connection it would be nice if the time at
+    which mtr was started is print somewhere. -- Sebastian Ganschow
+
+
 
 ------------------------------------------------------------------------
 
@@ -109,3 +114,7 @@
     slowly (relative to the RTT time to the end host), it can probe
     all hosts in the first "round". 
        -- DONE.
+
+  - Read environment variable "MTR_DEFAULTS" as a commandline before
+    parsing the commandline.  -- DONE. (ok it's MTR_OPTIONS.)
+

.