Date: Thu, 29 Jul 1993 14:19:48 -0600 (PDT) 
From: Irving Wiswall <irvw@LINFIELD.EDU>
Subject: [*] e-mail gateway.txt 

Below is a more recent version of the file e-mail gateway currently
archived in comm/info. Scott Yanoff now maintains this file.  It is
available via anonymous ftp from csd4.csd.uwm.edu in the pub directory.

-Irv Wiswall

------------
#VERSION: $Revision: 2.2 $
#VERSION: $Date: 7/9/93 $

#           * INTER-NETWORK MAIL GUIDE:    Last Update: 7/9/93 *
#
# Inter-Network Mail Guide - Original Copyright (C) 1992 by John J. Chew
# Further modifications and (C) 1993 by Scott Yanoff (yanoff@csd4.csd.uwm.edu)
#
# John Chew no longer maintains this list, and was therefore handed over to
# me by beezer@cc.utah.edu.  Attempts have been made to contact Chew but were
# unsuccessful.
#
# INTRODUCTION
#
# This file documents methods of sending mail from one network to another.
# It represents the aggregate knowledge of the readers of comp.mail.misc
# and many contributors elsewhere.  If you know of any corrections or
# additions to this file, please follow the instructions in the section
# entitled 'HOW TO FORMAT INFORMATION FOR SUBMISSION' and then mail the
# information to me: Scott A. Yanoff <yanoff@csd4.csd.uwm.edu>. 
#
# HOW TO USE THIS GUIDE
#
# If you just want to browse the guide manually for information, this is what
# you need to know.  The guide is organized as a list of entries.  Each entry
# tells you how to get from one network to another.  Here is what a typical
# entry might look like:
#
#   #FROM: mynet
#   #TO: yournet
#   #RECIPIENT: youraddress
#   #CONTACT: contactaddress
#   #INSTR: send to 'youraddress@thegateway'
#
# This means that to send mail FROM a network called 'mynet' TO a
# RECIPIENT address 'youraddress' on a network called 'yournet', you
# should follow the INSTRUCTIONS shown and address your mail to
# 'youraddress@thegateway'.
#
# Names and descriptions of the possible FROM and TO fields:
#
#N: aol           ; America Online; America Online, Inc.; commercial;
#N: applelink     ; AppleLink; Apple Computer, Inc.; in-house;
#N: arcom         ; X.400; ?; ?;
#N: att           ; AT&T Mail; AT&T; commercial;
#N: bitnet        ; BITNET; none; academic;
#N: bix           ; Byte Information eXchange; Byte magazine; commercial;
#N: bmug          ; ? ; Berkeley Macintosh Users Group; in-house;
#N: compuserve    ; CompuServe; CompuServe Inc.; commercial;
#N: connect       ; Connect Professional Information Network; ?; commercial;
#N: easylink      ; Easylink; AT&T; commercial;
#N: easynet       ; Easynet; DEC; in-house;
#N: envoy         ; Envoy-100; Telecom Canada; commercial; X.400
#N: fax           ; Facsimile document transmission; none; none;
#N: fidonet       ; FidoNet; none; bbs;
#N: genie         ; GEnie; GE Information Services; commercial;
#N: geonet        ; GeoNet Mailbox Systems; 
#- Geonet Mailbox Services GmbH/Systems Inc.; commercial;
#N: gold-400      ; GNS Gold 400; British Telecom; commercial; X.400
#N: goldgate      ; GoldGate Telcom Gold; Net-Tel Computer Systems; ?;
#N: greennet      ; GreenNet; Soft Solutions Ltd; commercial;
#N: gsfcmail      ; GSFCmail; NASA/Goddard Space Flight Center; in-house;
#N: ibm           ; VNET; IBM; in-house;
#N: internet      ; Internet; none; academic;
#N: keylink       ; KeyLink; Telecom Australia; commercial; X.400
#N: mailnet       ; X.400; ?; ?;
#N: mausnet       ; Mausnet; Mausnet; non-profit;
#N: mci           ; MCIMail; MCI; commercial;
#N: mfenet        ; Magnetic Fusion Energy Network;
#- Lawrence Livermore National Laboratory; academic;
#N: nasamail      ; NASAMail; NASA; in-house;
#N: nsi           ; NASA Science Internet; NASA; government;
#-  Dual-protocol: instructions given here pertain only to NSI-DECnet addresses
#-  (NSI-TCP/IP addresses should be treated as shown for 'internet')
#N: omnet         ; OMNET; OMNET; commercial;
#N: peacenet      ; PeaceNet; Institute for Global Communications;
#- non-profit;
#N: sinet         ; Schlumberger Information NETwork; ?; ?;
#N: sprintmail    ; SprintMail; Sprint; commercial; formerly Telemail
#N: thenet        ; Texas Higher Education Network; University of Texas;
#- academic ;
#N: wwivnet       ; WWIVnet; WWIVnet; non-profit;

# The 'RECIPIENT' record gives an example of an address on the
# destination network, to make it clear in subsequent lines what text
# requires subsitution.
#
# The 'CONTACT' record gives an address for inquiries concerning the
# gateway, expressed as an address reachable from the source (#FROM:) network.
# Presumably, if you can't get the gateway to work at all, then knowing
# an unreachable address on another network will not be of great help.
#
# The 'INSTR' records, of which there may be several, give verbal
# instructions to a user of the source network to let them send mail
# to a user on the destination network.  Text that needs to be typed
# will appear in double quotes, with C-style escapes if necessary.  If
# the instructions consist simply of mailing to a certain address, this
# will be indicated by the words 'send to' followed by a quoted address.
# If there are alternative addresses, they will be marked 'or to' instead.
#
# HOW TO FORMAT INFORMATION FOR SUBMISSION
#
# Here is what I really want in the way of information.  If you are adding
# a new network to the list, tell me what its official name is (pay attention
# to capitalization), what the name of its responsible organization is, and
# what kind of a network it is (academic, commercial, government, in-house
# or non-profit).  If this isn't clear, look at the examples above.
# For each connection, give me an entry that looks something like:
#
# #FROM: foonet
# #TO: barnet
# #RECIPIENT: baraddress
# #CONTACT: contactaddress
# #INSTR: send to 'baraddress@thegateway'
#
# Note that 'contactaddress' must be an address expressed in foonet's native
# format, and not that of barnet, since if a user is having trouble accessing
# barnet, giving him/her an address on that net to contact for help is not
# productive.  If there is no contact/postmaster address, please tell me.
# If there are more complicated instructions, use additional #INSTR: lines.
#
# Once you've got all the information together, send it to me in an e-mail
# message with the words 'INMG update' in the Subject: line.  You can in
# general expect an answer back from me within a week.

#FROM: aol
#TO: applelink
#RECIPIENT: user
#CONTACT: Internet
#INSTR: send to 'user@applelink'

#FROM: aol
#TO: compuserve
#RECIPIENT: 71234,567
#CONTACT: Internet
#INSTR: send to '71234.567@cis'

#FROM: aol
#TO: genie
#RECIPIENT: user
#CONTACT: Internet
#INSTR: send to 'user@genie'

#FROM: aol
#TO: internet
#RECIPIENT: user@domain
#CONTACT: Internet
#INSTR: send to 'user@domain'

#FROM: applelink
#TO: bitnet
#RECIPIENT: user@site
#INSTR: send to 'user@site.bitnet@internet#'

#FROM: applelink
#TO: internet
#RECIPIENT: user@domain
#INSTR: send to 'user@domain@internet#' (address must be < 35 characters)

#FROM: arcom
#TO: internet
#RECIPIENT: fred@Domain.dd.uu.us
#INSTR: send to C=CH,A=ARCOM,P=SWITCH,ORG=us,OU1=uu,OU2=dd,OU3=Domain,S=fred

#FROM: att
#TO: bitnet
#RECIPIENT: user@site
#INSTR: send to 'internet!site.bitnet!user'

#FROM: att
#TO: internet
#RECIPIENT: user@domain
#INSTR: send to 'internet!domain!user'

#FROM: bitnet
#TO: internet
#RECIPIENT: user@domain
#INSTR: Methods for sending mail from Bitnet to the Internet vary depending on
#-      what mail software is running at the Bitnet site in question.  In the
#-      best case, users should simply be able to send mail to 'user@domain'.
#-      If this doesn't work, try 'user%domain@gateway' where 'gateway' is a
#-      Bitnet-Internet gateway site nearby.  Finally, if neither of these
#-      works, you may have to try hand-coding an SMTP envelope for your mail.

#FROM: compuserve
#TO: fax
#RECIPIENT: +1 415 555 1212
#INSTR: send to '>FAX 14155551212'
#INSTR: not transitive - message must originate from a CompuServe user
#INSTR: for calls outside the NANP, use '011' as the international prefix

#FROM: compuserve
#TO: internet
#RECIPIENT: user@domain
#INSTR: send to '>INTERN:user@domain' (only from CompuServe users)

#FROM: compuserve
#TO: mci
#RECIPIENT: 123-4567
#INSTR: send to '>MCIMAIL:123-4567' (only from CompuServe users)

#FROM: connect
#TO: internet
#RECIPIENT: user@domain
#INSTR: send to 'DASN'
#-      and set the first line of message: '"user@domain"@DASN'

#FROM: easynet
#TO: bitnet
#RECIPIENT: user@site
#CONTACT: DECWRL::ADMIN
#INSTR: send to 'nm%DECWRL::"user@site.bitnet"' (from VMS using NMAIL)
#INSTR: send to 'user@site.bitnet' (from Ultrix)
#INSTR:   or to 'user%site.bitnet@decwrl.dec.com' (from Ultrix via IP)
#INSTR:   or to 'DECWRL::"user@site.bitnet"' (from Ultrix via DECN)

#FROM: easynet
#TO: fidonet
#RECIPIENT: john smith at 1:2/3.4
#CONTACT: DECWRL::ADMIN
#INSTR: send to 'nm%DECWRL::"john.smith@p4.f3.n2.z1.fidonet.org"'
#-      (from VMS using NMAIL)
#INSTR: send to 'john.smith@p4.f3.n2.z1.fidonet.org'
#-      (from Ultrix)
#INSTR: or to '"john.smith%p4.f3.n2.z1.fidonet.org"@decwrl.dec.com'
#-      (from Ultrix via IP)
#INSTR: or to 'DECWRL::"john.smith@p4.f3.n2.z1.fidonet.org"'
#-      (from Ultrix via DECN)

#FROM: easynet
#TO: internet
#RECIPIENT: user@domain
#CONTACT: DECWRL::ADMIN
#INSTR: send to 'nm%DECWRL::"user@domain"' (from VMS using NMAIL)
#INSTR: send to 'user@domain' (from Ultrix)
#INSTR:   or to 'user%domain@decwrl.dec.com' (from Ultrix via IP)
#INSTR:   or to 'DECWRL::"user@domain"' (from Ultrix via DECN)
#INSTR:   or to 'user@domain @Internet' (using ALL-IN-1)

#FROM: envoy
#TO: internet
#RECIPIENT: user@domain
#CONTACT: ICS.TEST or ICS.BOARD
#INSTR: send to '[RFC-822="user(a)domain"]INTERN/TELEMAIL/US'
#INSTR: for special characters, use @=(a), !=(b), _=(u),
#INSTR:          any=(three octal digits)

#FROM: fidonet
#TO: internet
#RECIPIENT: user@machine.site.domain
#INSTR: convert to 'user@machine.site.domain ON 1:1/31

#FROM: fidonet
#TO: wwivnet
#RECIPIENT: number@node
#CONTACT: Kevin C. ON 1:100/215
#INSTR: convert to '#number @node ON 1:100/215'
#INSTR: WWIVgate; LOW TRAFFIC SITE, USE SPARINGLY..  Gateway is modem-based,
#-      they absorb cost of long distance connects to pick-up and deliver.
#-      Keep messages under 10K, use infrequently, do NOT use mail-lists or
#-      file/list-server commands.

#FROM: genie
#TO: internet
#RECIPIENT: user@domain
#CONTACT: postmaster@genie.geis.com
#INSTR: send to user@domain@INET#

#FROM: geonet
#TO: internet
#RECIPIENT: user@domain
#INSTR: send to 'DASN'
#INSTR: set subject line to 'user@domain!subject'

#FROM: gold-400
#TO: internet
#RECIPIENT: user@host
#INSTR: send to '/DD.RFC-822=user(a)host/O=uknet/PRMD=uk.ac/ADMD=gold 400/C=GB/'
#INSTR: for special characters, use @=(a), %=(p), !=(b), "=(q)

#FROM: gsfcmail
#TO: internet
#RECIPIENT: user@domain
#CONTACT: cust.svc
#INSTR: send to '(SITE:SMTPMAIL,ID:<user(a)domain>)'
#INSTR: or to '(C:USA,A:TELEMAIL,P:SMTPMAIL,ID:<user(a)domain>)'
#INSTR: or send to 'POSTMAN'
#-      and set the first line of message to 'To: user@domain'
#INSTR: Help is also available by phoning +1 301 286 6865.

#FROM: gsfcmail
#TO: nsi
#RECIPIENT: host::user
#CONTACT: cust.svc
#INSTR: send to '(SITE:SMTPMAIL,ID:<user(a)host.DN.NASA.GOV>)'
#INSTR: or to '(C:USA,A:TELEMAIL,P:SMTPMAIL,ID:<user(a)host.DN.NASA.GOV>)'
#INSTR: or send to 'POSTMAN'
#-      and set the first line of message to 'To: user@host.DN.NASA.GOV'

#FROM: internet
#TO: aol
#RECIPIENT: A User
#CONTACT: postmaster@aol.com
#INSTR: send to auser@aol.com (all lower-case, remove spaces)
#INSTR: msgs are truncated to 32K (8K for PCs), all characters except newline
#-      & printable ASCII characters are mapped to spaces, users are limited to
#-      75 pieces of Internet mail in their mailbox at a time.

#FROM: internet
#TO: applelink
#RECIPIENT: user
#INSTR: send to 'user@applelink.apple.com'

#FROM: internet
#TO: arcom
#RECIPIENT: (G:John, I:Q., S:Smith, OU:ORG_UNIT, O:Org, P:PRMD, A:ADMD, C:CA)
#INSTR: send to:
#-  /G=John/I=Q/S=Smith/OU=ORG_UNIT/O=Org/P=PRMD/A=ADMD/C=CA@chx400.switch.ch

#FROM: internet
#TO: att
#RECIPIENT: user
#INSTR: send to 'user@attmail.com'

#FROM: internet
#TO: bitnet
#RECIPIENT: user@site
#INSTR: send to 'user%site.bitnet@gateway' where 'gateway' is a gateway host
#-      that is on both the internet and bitnet.  Some examples of gateways
#-      are: cunyvm.cuny.edu mitvma.mit.edu.  Check first to see what local
#-      policies are concerning inter-network forwarding.

#FROM: internet
#TO: bix
#RECIPIENT: user
#INSTR: send to 'user@bix.com'

#FROM: internet
#TO: bmug
#RECIPIENT: John Smith
#INSTR: send to 'John.Smith@bmug.fidonet.org'

#FROM: internet
#TO: compuserve
#RECIPIENT: 71234,567
#INSTR: send to '71234.567@CompuServe.com'
#INSTR:   Ordinary Compuserve account IDs are pairs of octal numbers

#FROM: internet
#TO: compuserve
#RECIPIENT: organization:department:user
#INSTR: send to 'user@department.organization.compuserve.com'
#INSTR:  This syntax is for use with members of organizations which have a
#-       private CompuServe mail area.  'department' may not always be present.

#FROM: internet
#TO: connect
#RECIPIENT: NAME
#INSTR: send to 'NAME@connectinc.com'

#FROM: internet
#TO: easylink
#RECIPIENT: user mail number 1234567
#INSTR: send to: 1234567@eln.attmail.com

#FROM: internet
#TO: easynet
#RECIPIENT: HOST::USER
#CONTACT: admin@decwrl.dec.com
#INSTR: send to 'user@host.enet.dec.com'
#INSTR:   or to 'user%host.enet@decwrl.dec.com'

#FROM: internet
#TO: easynet
#RECIPIENT: John Smith @ABC
#CONTACT: admin@decwrl.dec.com
#INSTR: send to 'John.Smith@ABC.MTS.DEC.COM'
#INSTR:   this syntax is for sending mail to ALL-IN-1 users

#FROM: internet
#TO: envoy
#RECIPIENT: John Smith (ID=userid)
#INSTR: send to 'uunet.uu.net!att!attmail!mhs!envoy!userid'

#FROM: internet
#TO: envoy
#RECIPIENT: John Smith (ID=userid)
#CONTACT: /C=CA/ADMD=TELECOM.CANADA/ID=ICS.TEST/S=TEST_GROUP/@nasamail.nasa.gov
#INSTR: send to
#INSTR: '/C=CA/ADMD=TELECOM.CANADA/DD.ID=userid/PN=John_Smith/@Sprint.COM'

#FROM: internet
#TO: fidonet
#RECIPIENT: john smith at 1:2/3.4
#INSTR: send to 'john.smith@p4.f3.n2.z1.fidonet.org'

#FROM: internet
#TO: genie
#RECIPIENT: user
#CONTACT: postmaster@genie.geis.com
#INSTR: send to user@genie.geis.com 

#FROM: internet
#TO: geonet
#RECIPIENT: user at host
#INSTR: send to 'user:host@map.das.net'
#INSTR:   or to 'user@host.geomail.org' (known to work for geo2)
#INSTR: known hosts: geo1 (Europe), geo2 (UK), geo4 (USA)

#FROM: internet
#TO: gold-400
#RECIPIENT: (G:John, I:Q, S:Smith, OU: org_unit, O:organization, PRMD:prmd)
#INSTR: send to 'john.q.smith@org_unit.org.prmd.gold-400.gb'
#INSTR:   or to
#- '"/G=John/I=Q/S=Smith/OU=org_unit/O=org/PRMD=prmd/ADMD=gold 400/C=GB/"
#- @mhs-relay.ac.uk'

#FROM: internet
#TO: goldgate
#RECIPIENT: 10087:CQQ061
#INSTR: send to '10087.CQQ061@goldgate.ac.uk'
#INSTR:   or to '/G=10087/S=CQQ061/P=uk.ac/O=GoldGate/C=GB/'

#FROM: internet
#TO: greennet
#RECIPIENT: user
#CONTACT: support@gn.apc.org
#INSTR: user@gn.apc.org    (or user@gn.uucp if mailing from JANET)

#FROM: internet
#TO: gsfcmail
#RECIPIENT: user
#CONTACT: help@nic.nsi.nasa.gov
#INSTR: send to 'user@gsfcmail.nasa.gov'
#INSTR:   or to '/PN=user/ADMD=TELEMAIL/PRMD=GSFC/O=GSFCMAIL/C=US/
#-        @x400.msfc.nasa.gov'

#FROM: internet
#TO: ibm
#RECIPIENT: user@vmnode.tertiary_domain (syntax?)
#CONTACT: nic@vnet.ibm.com
#INSTR: send to 'user@vmnode.tertiary_domain.ibm.com'
#INSTR: To look up a user's mailbox name, mail to nic@vnet.ibm.com with
#- the line 'WHOIS name' in the message body.

#FROM: internet
#TO: keylink
#RECIPIENT: (G:John, I:Q, S:Smith, O:MyOrg, A:Telememo, C:au)
#CONTACT: aarnet@aarnet.edu.au
#INSTR: send to John.Q.Smith@MyOrg.telememo.au
#INSTR: for keylink Private Mail Domains such as
#INSTR:   (G:John, S:Smith, O:MyDept, P:AusGov, A:Telememo, C:au)
#INSTR:   send to John.Smith@MyDept.AusGov.telememo.au

#FROM: internet
#TO: mausnet
#RECIPIENT: hans schmidt @ box
#CONTACT: sysop@k2.maus.de
#INSTR: send to 'hans_schmidt@box.maus.de'

#FROM: internet
#TO: mci
#RECIPIENT: John Smith (123-4567)
#INSTR: send to '1234567@mcimail.com'
#INSTR: or to 'JSmith@mcimail.com' (if 'JSmith' is unique)
#INSTR: or to 'John_Smith@mcimail.com' (if 'John Smith' is unique - note the
#-      underscore!)
#INSTR: or to 'John_Smith/1234567@mcimail.com' (if 'John Smith' is NOT unique)

#FROM: internet
#TO: mfenet
#RECIPIENT: user@mfenode
#INSTR: send to 'user%mfenode.mfenet@nmfecc.arpa'

#FROM: internet
#TO: nasamail
#RECIPIENT: user
#CONTACT: help@nic.nsi.nasa.gov
#INSTR: send to 'user@nasamail.nasa.gov'
#INSTR: Help is available by phoning +1 205 544 1771 or +1 301 286 7251.

#FROM: internet
#TO: nsi
#RECIPIENT: host::user
#CONTACT: help@nic.nsi.nasa.gov
#INSTR: send to 'user@host.dnet.nasa.gov'
#INSTR:   or to 'user%host.dnet@ames.arc.nasa.gov'
#INSTR:   or to 'user%host.dnet@east.gsfc.nasa.gov'
#INSTR: Help is also available by phoning +1 301 286 7251.

#FROM: internet
#TO: omnet
#RECIPIENT: user
#CONTACT: help@nic.nsi.nasa.gov
#INSTR: send to 'user@omnet.nasa.gov'
#INSTR:   or to 'user/omnet@omnet.nasa.gov' (?)
#INSTR:   or to '/DD.UN=user/O=OMN/ADMD=TELEMAIL/C=US/@Sprint.COM'
#INSTR: Help is available by phoning +1 301 286 7251 or +1 617 244 4333 (OMN
#-      customers only).

#FROM: internet
#TO: peacenet
#RECIPIENT: user
#CONTACT: support@igc.org
#INSTR: send to 'user@cdp.igc.org'

#FROM: internet
#TO: sinet
#RECIPIENT: node::user or node1::node::user
#INSTR: send to 'user@node.SINet.SLB.COM'
#INSTR:   or to 'user%node@node1.SINet.SLB.COM'

#FROM: internet
#TO: sprintmail
#RECIPIENT: John Smith at SomeOrganization
#CONTACT: help@nic.nsi.nasa.gov
#INSTR: send to
#- '/G=John/S=Smith/O=SomeOrganization/ADMD=TELEMAIL/C=US/@Sprint.COM'
#INSTR: Help is also available by phoning +1 301 286 7251.

#FROM: internet
#TO: thenet
#RECIPIENT: user@host
#INSTR: send to 'user%host.decnet@utadnx.cc.utexas.edu'

#FROM: internet
#TO: wwivnet
#RECIPIENT: number@node
#CONTACT: faq-request@tfsquad.mn.org or bryen@tfsquad.mn.org
#INSTR: convert to 'number-node@wwiv.tfsquad.mn.org'
#INSTR: WWCPgate; LOW TRAFFIC SITE, USE SPARINGLY..  Gateway is modem-based,
#-      they absorb cost of long distance connects to pick-up and deliver.
#-      Keep messages under 10K, use infrequently, do NOT use mail-lists or
#-      file/list-server commands.

#FROM: keylink
#TO: internet
#RECIPIENT: John Smith <user@domain>
#CONTACT: (G:CUSTOMER, S:SERVICE, O:CUST.SERVICE, P:telememo, C:au)
#INSTR: send to '(C:au, A:telememo, P:oz.au, "RFC-822":"John Smith
#-  <user(a)domain>")'
#INSTR: special characters must be mapped: @->(a), %->(p), !->(b), "->(q)

#FROM: mausnet
#TO: internet
#RECIPIENT: user@domain
#CONTACT: sysop@k2
#INSTR: send to 'user@domain'

#FROM: mci
#TO: compuserve
#RECIPIENT: John Smith (71234,567)
#CONTACT: 267-1163 (MCI Help)
#INSTR: at the 'To:' prompt type 'John Smith (EMS)'
#INSTR: at the 'EMS:' prompt type 'compuserve'
#INSTR: at the 'Mbx:' prompt type '71234,567'

#FROM: mci
#TO: internet
#RECIPIENT: John Smith <user@domain>
#CONTACT: 267-1163 (MCI Help)
#INSTR: at the 'To:' prompt type 'John Smith (EMS)'
#INSTR: at the 'EMS:' prompt type 'INTERN'
#INSTR: at the 'Mbx:' prompt type 'user@domain'

#FROM: nasamail
#TO: internet
#RECIPIENT: user@domain
#CONTACT: admin
#INSTR: send to '(site:smtpmail,id:<user(a)domain>)'
#INSTR: Help is also available by phoning +1 205 544 1771 and at 'admin/nasa'.

#FROM: nasamail
#TO: nsi
#RECIPIENT: host::user
#CONTACT: admin
#INSTR: send to '(site:smtpmail,id:<user(a)host.DN.NASA.GOV>)'
#INSTR: Help is also available by phoning +1 205 544 1771 and at 'admin/nasa'.

#FROM: nsi
#TO: gsfcmail
#RECIPIENT: user
#CONTACT: help@nic.nsi.nasa.gov
#INSTR: send to 'east::"user@gsfcmail.nasa.gov"'
#INSTR: or to 'east::"/PN=user/ADMD=TELEMAIL/PRMD=GSFC/O=GSFCMAIL/C=US/
#-      @x400.msfc.nasa.gov'
#INSTR: Help is also available by phoning +1 301 286 7251.

#FROM: nsi
#TO: internet
#RECIPIENT: user@domain
#CONTACT: nsinic::nsihelp
#INSTR: send to 'east::"user@domain"'
#INSTR: or to 'dftnic::"user@domain"'
#INSTR: or to 'nssdca::in%"user@domain"'
#INSTR: or to 'jpllsi::"user@domain"'
#INSTR: Help is also available by phoning +1 301 286 7251.

#FROM: nsi
#TO: omnet
#RECIPIENT: user
#CONTACT: omnet.service
#INSTR: send to 'east::"user@omnet.nasa.gov"'
#INSTR: Help also available by phoning +1 617 244 4333 (OMN customers only)

#FROM: nsi
#TO: sprintmail
#RECIPIENT: John Smith at SomeOrganization
#CONTACT: nsinic::nsihelp
#INSTR: send to
#- '/G=John/S=Smith/O=SomeOrganization/ADMD=TELEMAIL/C=US/@Sprint.COM'
#INSTR: Help is also available by phoning +1 301 286 7251.

#FROM: omnet
#TO: internet
#RECIPIENT: user@domain
#CONTACT: omnet.service
#INSTR: Enter 'compose manual' at the command prompt.  Choose the Internet
#-      address option from the menu that appears.  Note that this gateway
#-      service charges based on the number of 1000-character blocks sent.
#INSTR: Help also available by phoning +1 617 244 4333 (OMN customers only).

#FROM: sinet
#TO: internet
#RECIPIENT: user@domain
#INSTR: send to 'M_MAILNOW::M_INTERN::"user@domain"'
#INSTR:   or to 'M_MAILNOW::M_INTERN::domain::user'

#FROM: sprintmail
#TO: internet
#RECIPIENT: user@domain
#INSTR: send to '(C:USA,A:TELEMAIL,P:INTERN,"RFC-822":<user(a)domain>) DEL'
#INSTR: Help available within the United States by phoning +1 800 336 0437 and
#-      pressing '2' on a TouchTone phone.

#FROM: sprintmail
#TO: nsi
#RECIPIENT: host::user
#INSTR: send to
#-  '(C:USA,A:TELEMAIL,P:INTERN,"RFC-822":<user(a)host.DNET.NASA.GOV>) DEL'
#INSTR: Help available within the United States by phoning +1 800 336 0437 and
#-      pressing '2' on a TouchTone phone.

#FROM: thenet
#TO: internet
#RECIPIENT: user@domain
#INSTR: send to 'UTADNX::WINS%" user@domain "'

#FROM: wwivnet
#TO: fidonet
#RECIPIENT: First Last ON zone:node/fnet
#CONTACT: 1@3469
#INSTR: convert to 'First Last ON zone:node/fnet @656'
#INSTR: WWIVgate; LOW TRAFFIC SITE, USE SPARINGLY..  Gateway is modem-based,
#-      they absorb cost of long distance connects to pick-up and deliver.
#-      Keep messages under 10K, use infrequently, do NOT use mail-lists or
#-      file/list-servers commands.

#FROM: wwivnet
#TO: internet
#RECIPIENT: user@machine.site.domain
#CONTACT: faq-request@9702 or 1@9702
#INSTR: convert to 'user#machine.site.domain@506'
#-      If 'user' begins with digits, begin address with a quote.
#INSTR: WWCPgate; LOW TRAFFIC SITE, USE SPARINGLY..  Gateway is modem-based,
#-      they absorb cost of long distance connects to pick-up and deliver.
#-      Keep messages under 10K, use infrequently, do NOT use mail-lists or
#-      file/list-server commands.

 




.