BDOS - Basic I/O Operations/Functions BDOS - Basic Disk Operations/Functions Console Read Buffer Organization/Meaning (re: BDOS Function 10) File Control Block Organization/Meaning :BDOS - Basic I/O Operations Function and Number Input Parameters Output Parameters System Reset 0 None None Read Console 1 None ASCII Char in A Write Console 2 ASCII Char in E None Read Reader 3 None ASCII Char in A Write Punch 4 ASCII Char in E None Write List 5 ASCII Char in E None Direct Con I/O 6 ASCII Char in E I/O Status in A if E=0FFH *All function numbers are passed in Reg C. ~ Function and Number Input Parameters Output Parameters Get I/O Status 7 None I/O Status in A Put I/O Status 8 I/O Status in E None Print Buffer 9 Address of string None terminated by $ in DE Read Buffer 10 Address of Read Read Buffer is filled Buffer in DE (See Section on Organization) Console Ready 11 None LSB of A is 1 if char ready Return Version # 12 None Version Info in HL H=0 CP/M, H=1 MP/M L=00 CP/M 1.x, 2x 2.x *All function numbers are passed in Reg C. :BDOS - Basic Disk Operations Function and Number Input Parameters Output Parameters Init BDOS 13 None None Log-In Disk 14 Value in Reg E None A=0, B=1, C=2, D=3 Open File 15 Address of FCB Byte address of FCB in DE if found or 0FFH if not Close File 16 Address of FCB Byte address of FCB in DE if found or 0FFH if not Search for File 17 Address of FCB Byte address of FCB (0-3) in DE if found or 0FFH if not Search for Next 18 Address of FCB Byte address of next FCB in DE if found or 0FFH if not Delete File 19 Address of FCB Byte address of FCB (0-3) in DE if found or 0FFH if not *All function numbers are passed in Reg C. ~ Function and Number Input Parameters Output Parameters Read Next Record 20 Address of FCB 0=successful read in DE 1=read past EOF 2=reading random data Write Next Rec 21 Address of FCB 0=successful write in DE 1=error in extending 2=end of disk data 255=no more dir space Make File 22 Address of FCB Byte address of FCB or in DE 255 if no more dir space Rename FCB 23 Address of FCB Byte Address of Dir entry in DE or 255 if no match Return Log Code 24 None Login vector in HL Read Drive No 25 None Number of logged-in drive (A=0, B=1, C=2, D=3) Set DMA Address 26 Address of 128 None byte buffer in DE *All function numbers are passed in Reg C. ~ Function and Number Input Parameters Output Parameters GeAllo Vec 2 Non Allocatio Vec Add i HL Write Prot Disk 28 None None Get R/O Vect 29 None HL=R/O Vect Val Set File Attrib 30 Ptr to FCB in DE Dir code in A Get Disk Parms 31 None HL=DPB Address Set/Get Usr Code 32 E=0FFH (get)/Code A=Current code (get)/no (set) value (set) *All function numbers are passed in Reg C. NOTE: Functions 28-32 should be avoided in application programs in order to maintain upward compatibility with CP/M. ~ Function and Number Input Parameters Output Parameters Read Random 33 DE=FCB addr A=return code 1=reading unwritten data 2=(not used) 3=can't close curr ext 4=seek to unwritten ext 5=(not used) 6=seek past end of disk Write Random 34 DE=FCB addr A=return code 1=reading unwritten data 2=(not used) 3=can't close curr ext 4=seek to unwritten ext 5=dir overflow 6=seek past end of disk *All function numbers are passed in Reg C. NOTE: Functions 28-32 should be avoided in application programs in order to maintain upward compatibility with CP/M. ~ Function and Number Input Parameters Output Parameters Compute File Siz 35 DE=FCB addr Random Rec Field set to file size Set Random Rec 36 DE=FCB addr Random Rec Field set Reset Drive 37 DE=Drive Vector A=return code, Always 00h Write Random 40 DE=FCB addr A=return code (w/zero fill) 1=reading unwritten data 2=(not used) 3=can't close curr ext 4=seek to unwritten ext 5=dir overflow 6=seek past end of disk *All function numbers are passed in Reg C NOTE: Functions 28-32 should be avoided in application programs in order to maintain upward compatibility with CP/M. :Console Read Buffer Organization/Meaning (re: BDOS Function 10) Refer to BDOS function 10 'Read Console Buffer' Byte Function 1 Maximum Buffer Length (1 to 255) 2 Current Buffer Length (returned value) No. of characters in the buffer 3-n Data (returned values) The actual characters read from the console and in the buffer. If the number of characters in the buffer is less than the length of the buffer, then uninitialized positions follow the last character. Also note that certain functions that return the carriage return to the leftmost position (e.g., ctl-X), do so only to the column position where the prompt ended. :File Control Block Organization/Meaning In file operations, starting with Function 15, Register DE usually addresses a file control block. Transient programs often use the default file control block at location BOOT+005Ch (normally 005Ch), for simple file operations. The basic unit of file information is a 128-byte record used for all file operations; thus, a default location for disk I/O is provided by CP/M at location BOOT+0080h (normally 0080h), which is the initial default DMA address (see function 26). All directory operations take place in a reserved area that does not effect write buffers, with the exception of Search First and Search Next. The FCB data area consists of a sequence of 33 bytes for sequential access and a series of 36 bytes in the case when the file is accessed randomly. The default FCB, normally located at 005Ch, can be used for random access files, since the three bytes starting at BOOT+007Dh are available for this purpose. ~ The FCB format is as follows: dr f1 f2 / / f8 t1 t2 t3 ex s1 s2 rc d0 / / dn cr r0 r1 r2 00 01 02 ... 08 09 10 11 12 13 14 15 16 ... 31 32 33 34 35 where dr drive code (0-16) 0 use default drive for file 1 auto disk select drive A 2 auto disk select drive B .... 16 auto disk select drive P f1...f8 contain the file name in ASCII upper case, with high bit = 0 t1,t2,t3 contain the file type in ASCII upper case, with high bit = 0 t1, t2 and t3 denote the bit of these positions t1 Read Only file t2 Systom File, not Directory listing ~ dr f1 f2 / / f8 t1 t2 t3 ex s1 s2 rc d0 / / dn cr r0 r1 r2 00 01 02 ... 08 09 10 11 12 13 14 15 16 ... 31 32 33 34 35 where ex contains the current extent number, normally set to 00 by the user, but in the range of 0-31 during file I/O s1 reserved for internal system use s2 reserved for internal system use, set to zero on call to OPEN, MAKE, SEARCH rc record count of extent 'ex'. value from 0-127. d0...dn filled-in by CP/M, reserved for system use cr current record to read or write in a sequential file operation. normally set to zero by the user. r0,r1,r2 optional random record number in the range 0-65535, with overflow to r2,r0,r1 constitute a 16 bit value with low byte r0, and high byte r1.  .