:STAT COMMAND
The STAT Command takes any of the following forms --

STAÔ      Calculatå thå storagå remaininç oî alì activå driveó anä prinô  á �
          message like
               x: R/W, SPACE: nnnK  -- if disk is Read/Write
               x: R/O, SPACE: nnnK  -- if disk is Read Only

STAT x:   Calculate the storage remaining on the specified drive and print
               BYTES REMAINING ON x: nnnK
~
STAT x:afn [$S]
          Scaî thå specifieä fileó oî thå specifieä drivå (xº ió optional)¬ �
          anä  lisô  alì fileó whicè satisfù thå unambiguouó  referencå  iî �
          alphabeticaì  ordeò witè storagå requirements®   Á tablå likå thå �
          following is generated --

               Size Recs Bytes Ext Acc
              sssss rrrr  nnnk  ee a/b d:pppppppp.sss

          where
               sssss -- number of virtual 128-byte records in file
                    This field is display if the optional $S is given
               rrrr -- number of 128-byte records in each extent of the file
               nnnK -- number of bytes (in K, K=1024) allocated to the file
               ee -- number of 16K extensions
               a/b -- access mode of file; R/O or R/W
               d:pppppppp.sss -- drive name (d may be A, B, C, D) and file
                         name
~
STAT x:=R/O
          Seô thå specifieä drivå tï Reaä Only®   Thió ió cleareä bù á warí �
          boot.  When a disk is Read Only, the message
               BDOS ERR ON x: READ ONLY
          will appear if there is an attempt to write to it.

STAT VAL:
          Summarize the status commands.  STAT VAL: will print the list --

               Temp R/O Disk:  d:=R/O
               Set Indicator:  d:filename.typ $R/O $R/W $SYS $DIR
               Disk Status  :  DSK: d:DSK:
               User Status  :  USR:
               Iobyte Assign:
               CON: = TTY:  CRT:  BAT:  UC1:
               RDR: = TTY:  PTR:  UR1:  UR2:
               PUN: = TTY:  PTP:  UP1:  UP2:
               LST: = TTY:  CRT:  LPT:  UL1:
~
STAT DEV:
          Displaù  thå  currenô logicaì tï physicaì  devicå  mapping®   Foò �
          example, the list may appear as --

               CON: = CRT:         PUN: = PTP:
               RDR: = UR1:         LST: = TTY:

STAT d:afn [$R/O or $R/W or $SYS or $DIR]
          Seô  thå  variouó  permanenô  filå  indicators®    R/O=Read/Only¬ �
          R/W=Read/Write, SYS=System, DIR=Non-System

STAT ld1=pd1, ld2=pd2, ...
          Changå  thå  logicaì  tï physicaì  devicå  assignments®   Logicaì �
          devicå ld± ió assigneä tï physicaì devicå pd1¬  etc®   Thå  valiä �
          logical device names are --

               CON:      The system console device
               RDR:      The paper tape reader device
               PUN:      The paper tape punch device
               LST:      The output list device
~
          The valid physical device names are --

               TTY:      Slow speed output device (teletype)
               CRT:      High speed output device (cathode ray tube)
               BATº      Batcè processinç (CONº inpuô ió RDR:¬  CONº outpuô �
                         is LST:)
               UC1:      User-defined console
               PTR:      Paper tape reader
               PTP:      Paper tape punch
               UR1:      User-defined reader #1
               UR2:      User-defined reader #2
               UP1:      User-defined punch #1
               UP2:      User-defined punch #2
               LPT:      Line printer
               UL1:      User-defined list device #1

~
STAT d:DSK:
          Lisô  thå characteristicó oæ thå disë nameä "d:"»  iæ "d:¢ ió noô �
specified, list the characteristics of all active disks.  A sample listing:

               d: Drive Characteristics
           65536: 128 Byte Record Capacity
            8192: Kilobyte Drive Capacity
             128: 32  Byte Directory Entries
               0: Checked  Directory Entries
            1024: Records/ Extent
             128: Records/ Block
              58: Sectors/ Track
               2: Reserved Tracks

STAT USR:
          Lisô  thå  Useò  Numbeò thå useò ió currentlù  iî  anä  thå  Useò �
Numberó  whicè  havå  fileó  oî thå currentlù  addresseä  disk®   Á  samplå �
listing:
               Active User : 0
               Active Files: 0 1 3

.