Directory Manipulation Routines -- DIRECT, DIR, DIRSEL, DIRALP
Numeric String Evaluation Routines -- EVAL, EVAL16, EVAL10, EVAL8, EVAL2
Byte-Oriented File Input/Output Routines
FI$OPEN and FO$OPEN, et al -- Byte-Oriented Input and Output File Open
FI$CLOSE and FO$CLOSE, et al -- Byte-Oriented Input and Output File Close
F$GET and F$PUT, et al -- Byte-Oriented Input and Output
CP/M File Input/Output Routines
INITFCB -- Initialize FCB
File Manipulation -- F$OPEN, F$CLOSE, F$MAKE, F$DELETE
File Input/Output Routines -- F$READ and F$WRITE
Input Line Editor -- INLINE
String Output Routines -- PRINT, LPRINT, PSTR, LPSTR
Numeric  Output Routines -- PHL4HC,PHL5DC,PHLDC,PA2HC,PA3DC,PADC, L's, M's
String and Value Comparison Routines -- COMPHD,COMPB,COMPBC,SCANNER,INSTR
<CR> <LF> Output -- CRLF and LCRLF
Conditional Input -- CONDIN
General Input Routines -- CST, CIN, RIN
General Output Routines -- COUT, LOUT, POUT, CCOUT, CLOUT, CPOUT
Misc Routines -- BDOS, CAPS, CIO, EN, FILLB, FILLBC, MOVEB, MOVEBC, CATH
:Directory Manipulation Routines -- DIRECT, DIR, DIRSEL, DIRALP
     Routine Name:  DIRECT
     Function:   DIRECT  loads  a copy of the directory  of  the  currently 
logged-in disk drive into the 32 x 64 byte buffer pointed to by HL, selects 
all  file entries which match the contents of the 11-byte file name  buffer 
pointed  to  by  DE (buffer may contain ?'s as  wild  specifications),  and 
alphabetizes the entries in the buffer either by file name/type or by  file 
type/name.   Only  entries  where the extent is zero (1st file  entry)  are 
returned.
     Inputs:  HL points to the 32 x 64 byte buffer for the directory
              DE points to the 11-byte file name/type buffer containing the 
file name/type to select
              A  is alphabetization indicator;  A=0 => alphabetize by  file 
name and type, A<>0 => alphabetize by file type and name
     Outputs:  A = number of entries in directory buffer
     Registers Affected:  PSW
     SYSLIB Routines Called:  -None- (All calls within module)
     Special Error Conditions:  -None-

     Routine Name:  DIR
     Function:   DIR loads a copy of the directory of the currently logged-
in disk drive into the 32 x 64 byte buffer pointed to by L.   On return,  A 
contains a count of the number of entries in the directory.
     Inputs:  HL points to the 32 x 64 byte buffer for the directory
     Outputs:  A = number of entries in directory buffer
     Registers Affected:  PSW
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Name:  DIRSEL (DIRSELECT)
     Function:  DIRSEL scans the directory buffer pointed to by HL for  the 
file   name/type  pointed  to  by  DE  (may  contain  ?'s  for  wild   card 
specifications).   It restructures the directory buffer to contain only the 
matching entries.   On return, A=number of entries in buffer.  Only entries 
with extents equal to zero are selected;  all entries with non-zero extents 
are rejected.
     Inputs:  HL points to the 32 x 64 byte buffer for the directory
              DE points to the 11-byte file name/type buffer
              A = number of entries in directory buffer
     Outputs:  A = number of entries in directory buffer
     Registers Affected:  PSW
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Name:  DIRALP (DIRALPHABETIZE)
     Function:   DIRALP alphabetizes the directory buffer pointed to by  HL 
according  to the compare option passed in C (if C=0,  alphabetize by  file 
name & type; if C<>0, alphabetize by file type & name).
     Inputs:  HL points to the 32 x 64 byte buffer for the directory
              C = alphabetization flag (FN & FT if C=0, FT & FN if C<>0)
              A = number of entries in directory buffer
     Outputs:  -None- (buffer is alphabetized)
     Registers Affected:  -None-
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-
:Numeric String Evaluation Routines -- EVAL, EVAL16, EVAL10, EVAL8, EVAL2
     Routine Name:  EVAL
     Function:  This routine converts the character string pointed to by HL 
into  the  16-bit  binary  number represented by  it.   EVAL  performs  the 
conversion until a non-hexadecimal character is encountered,  at which time 
it  looks at the last character and the previous character to determine  if 
the string is representing a binary, octal, decimal, or hexadecimal number.  
Input string characters may be upper- or lower-case.  Valid formats for the 
input string are --
          bbbbbbbbbbbbbbbbB -- b=0 or b=1; Binary string
          ttttt or tttttD -- 0 <= t <= 9; Decimal string
          hhhhH or hhhhX -- 0 <= h <= F; Hexadecimal string
          oooooooO or oooooooQ -- 0 <= o <= 7; Octal string


     Inputs:  HL points to the first byte of the string to convert
              String is loaded in a buffer
     Outputs:  HL points to next character after converted string
               DE contains 16-bit value
               A = E
               CARRY  Flag  Set means an error was  encountered  in  string 
format
     Registers Affected:  PSW, DE, HL
     SYSLIB Routines Called:  CAPS, EVAL16, EVAL10, EVAL8, EVAL2
     Special  Error Conditions:  CARRY Flag Set indicates that an error was 
encountered  in  the evaluation of the string;  if so,  HL  points  to  the 
offending character

     Routine Name:  EVAL16
     Function:   EVAL16 converts the string of ASCII hexadecimal characters 
pointed to by HL into a 16-bit binary value.   Conversion progresses  until 
an invalid hexadecimal digit (0-9, A-F) is encountered.
     Inputs:  HL points to the first byte of the string to convert
              String is loaded in a buffer
     Outputs:  HL points to the offending character
               DE contains the 16-bit value
               A = E
     Registers Affected:  PSW, DE, HL
     SYSLIB Routines Called:  CAPS
     Special Error Conditions:  -None-

     Routine Name:  EVAL10
     Function:   EVAL10  converts  the string of ASCII  decimal  characters 
pointed to by HL into a 16-bit binary value.   Conversion progresses  until 
an invalid decimal digit (0-9) is encountered.
     Inputs:  HL points to the first byte of the string to convert
              String is loaded in a buffer
     Outputs:  HL points to the offending character
               DE contains the 16-bit value
               A = E
     Registers Affected:  PSW, DE, HL
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Name:  EVAL8
     Function:  EVAL8 converts the string of ASCII octal characters pointed 
to  by  HL  into a 16-bit binary value.   Conversion  progresses  until  an 
invalid octal digit (0-7) is encountered.
     Inputs:  HL points to the first byte of the string to convert
              String is loaded in a buffer
     Outputs:  HL points to the offending character
               DE contains the 16-bit value
               A = E
     Registers Affected:  PSW, DE, HL
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Name:  EVAL2
     Function:   EVAL2  converts  the  string of  ASCII  binary  characters 
pointed to by HL into a 16-bit binary value.   Conversion progresses  until 
an invalid binary digit (0-1) is encountered.
     Inputs:  HL points to the first byte of the string to convert
              String is loaded in a buffer
     Outputs:  HL points to the offending character
               DE contains the 16-bit value
               A = E
     Registers Affected:  PSW, DE, HL
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-
:Byte-Oriented File Input/Output Routines
     The  following  documentation covers the series of byte-oriented  file 
input/output  routines  in  SYSLIB.   These  routines  allow  the  user  to 
sequentially  read from (GET) and write to (PUT) a file on a  byte-for-byte 
basis.   Hence,  these routines provide an exceptionally simple method  for 
handling input from and output to a file.
     A  typical program which employs these routines must open the required 
files before doing any processing,  must then perform the processing on the 
opened  files,  and  must  then  close the files  when  the  processing  is 
complete  (closing the files is optional for input files and mandatory  for 
output files).
     SYSLIB provides four sets of routines for byte-oriented file input and 
output.  These routines are --

   Input Open     Output Open     GET    PUT   Input Close  Output Close
   ----------     -----------     ---    ---   -----------  ------------
    FI$OPEN        FO$OPEN       F$GET  F$PUT   FI$CLOSE     FO$CLOSE
    F1I$OPEN       F1O$OPEN      F1$GET F1$PUT  F1I$CLOSE    F1O$CLOSE
    F2I$OPEN       F2O$OPEN      F2$GET F2$PUT  F2I$CLOSE    F2O$CLOSE
    F3I$OPEN       F3O$OPEN      F3$GET F3$PUT  F3I$CLOSE    F3O$CLOSE

     This system allows the user to have up to 8 files open  simultaneously 
-- four  are  open for input using GET and four are open for  output  using 
PUT.   For  example,  the  following is a sample code section  using  these 
routines for two files:


          EXT  FI$OPEN   ; DECLARE LIBRARY REFERENCES
          EXT  FO$OPEN
          EXT  FI$CLOSE
          EXT  FO$CLOSE
          EXT  F$GET
          EXT  F$PUT
          ...
          LXI  D,FCBI    ; PT TO FCB OF INPUT FILE
          CALL FI$OPEN
          LXI  D,FCBO    ; PT TO FCB OF OUTPUT FILE
          CALL FO$OPEN
          ...
          [body containing CALL F$GET and CALL F$PUT where required]
          ...
          CALL FI$CLOSE  ; CLOSE FILE
          CALL FO$CLOSE
          ...
          END

     Note  that  only  the routines to be used are referenced  in  the  EXT 
statements.   If you do not need a particular routine, do not reference it.  
Not  referencing  an unneeded routine generally saves the  overhead  memory 
space of loading it from the library.
     Each set of OPEN,  CLOSE,  GET,  and PUT routines is contained in  one 
library  module,  so  referencing any of these routines causes  the  entire 
module  to  be  loaded,  and all the routines are accessable  to  the  user 
(provided  they  are  mentioned  in the extenal  definitions)  without  any 
additional memory  overhead.   Specifically,  FI$OPEN,  FI$CLOSE,  FO$OPEN, 
FO$CLOSE,  F$GET,  and F$PUT are contained in one module,  and reference to 
any  of  these routines loads the entire module;  the same is true for  the 
other sets of routines.
     The  CLOSE routine for output (FO$CLOSE) is ALWAYS required;  it fills 
the  rest  of the current block with Ctrl-Z followed by  <NULL>  bytes  and 
properly  closes file.   The CLOSE routine for input (FI$CLOSE) is required 
ONLY  IF  you  are going to later open another file  for  input  using  the 
corresponding  OPEN routine (FI$OPEN).   FI$CLOSE only serves to reset  the 
OPEN  flag  (used  to  GET to ascertain that the  file  has  been  properly 
opened).
:FI$OPEN and FO$OPEN, et al -- Byte-Oriented Input and Output File Open
     Routine Names:  FI$OPEN, F1I$OPEN, F2I$OPEN, F3I$OPEN
     Function:  Open the file whose FCB is pointed to by DE for input  (use 
with F$GET).
     Inputs:  DE = ptr to FCB of file to open
     Outputs:  -None- (File is Opened)
     Registers Affected:  PSW
     SYSLIB Routines Called:  F$OPEN, PRINT
     Special Error Conditions:  Failure to properly open aborts to CP/M.

     Routine Names:  FO$OPEN, F1O$OPEN, F2O$OPEN, F3O$OPEN
     Function:  Open the file whose FCB is pointed to by DE for output (use 
with F$PUT).
     Inputs:  DE = ptr to FCB of file to open
     Outputs:  -None- (File is Opened)
     Registers Affected:  PSW
     SYSLIB Routines Called:  F$OPEN, PRINT
     Special Error Conditions:  Failure to properly open aborts to CP/M.
:FI$CLOSE and FO$CLOSE, et al -- Byte-Oriented Input and Output File Close
     Routine Names:  FI$CLOSE, F1I$CLOSE, F2I$CLOSE, F3I$CLOSE
     Function:   Close  the  file previously opened  by  the  corresponding 
FI$OPEN  routine.   Use  of these routines is optional if the another  file 
will  not  be  opened later in the program  by  the  corresponding  FI$OPEN 
routine.
     Inputs:  -None-
     Outputs:  -None- (File is Closed)
     Registers Affected:  -None-
     SYSLIB Routines Called:  F$OPEN, PRINT
     Special  Error  Conditions:   If a file is not already opened  by  the 
corresponding FI$OPEN routine, no error results.

     Routine Names:  FO$CLOSE, F1O$CLOSE, F2O$CLOSE, F3O$CLOSE
     Function:   Close  the  file previously opened  by  the  corresponding 
FO$OPEN  routine.   Use of these routines is MANDATORY after output to  the 
file (using the corresponding F$PUT routine) is complete.
     Inputs:  -None-
     Outputs:  -None- (File is Closed)
     Registers Affected:  -None-
     SYSLIB Routines Called:  F$OPEN, PRINT
     Special  Error  Conditions:  If a file is  not  already  opened,  this 
routine aborts to CP/M.
:F$GET and F$PUT, et al -- Byte-Oriented Input and Output
     Routine Names:  F$GET, F1$GET, F2$GET, F3$GET
     Function:   Get  the  next byte in sequence from the  file  previously 
opened by the corresponding FI$OPEN routine.   Byte is returned in Register 
A.
     Inputs:  -None-
     Outputs:  A = Next byte from file
               Carry Flag is Set (C) if EOF or past EOF read occurs
               Carry Flag is Reset (NC) if read was OK
     Registers Affected:  PSW
     SYSLIB Routines Called:  F$OPEN, PRINT
     Special  Error Conditions:  Error condition is returned in Carry Flag.  
If  a file was not previously opened by the corresponding FI$OPEN  routine, 
aborts to CP/M.

     Routine Names:  F$PUT, F1$PUT, F2$PUT, F3$PUT
     Function:   Put  the  byte  in Register A onto the  end  of  the  file 
previously opened by the corresponding FO$OPEN routine.
     Inputs:  A = Byte to PUT
     Outputs:  -None-
     Registers Affected:  -None-
     SYSLIB Routines Called:  F$OPEN, PRINT
     Special  Error Conditions:  If a file was not previously opened by the 
corresponding  FO$OPEN  routine,  aborts to CP/M.   If an error  occurs  in 
writing to the disk, aborts to CP/M.
:CP/M File Input/Output Routines
     The  following  routines are general-purpose file I/O  routines  which 
interface to CP/M through the Entry Point at location 5.  They preserve BC, 
DE,  and  HL,  and  they return with the standard CP/M error codes for  the 
corresponding routines.
     Specifically, these routines are --

          INITFCB   Initialize FCB from a string of the form "filename.typ"
          F$OPEN    Open a file
          F$CLOSE   Close a file
          F$MAKE    Create a file
          F$DELETE  Delete a file
          F$READ    Read a block (128 bytes) from a file
          F$WRITE   Write a block (128 bytes) to a file
:INITFCB -- Initialize FCB
     Routine Name:  INITFCB
     Function:   Given the name of a file (filename.typ) pointed to  by  HL 
and  a 33-byte buffer pointed to by DE,  INITFCB initializes this buffer as 
an  FCB  containing  the file name and file type correctly  placed  in  the 
buffer  and  all  other entries zero.   The input string  consists  of  1-8 
characters for the file name,  a decimal point (optional),  1-3  characters 
for  the file type (optional),  and a trailing character of space (<SP>) or 
less.  Wild cards (?,*) may be included in the string.  A sample usage is: 

          ...
          LXI  H,NAME
          LXI  D,FCB     ; HL PTS TO FILE NAME, DE PTS TO BUFFER
          CALL INITFCB
          ...
NAME:     DB   'FILE.TYP',0
FCB:      DS   33
          ...


     Inputs:  HL = pointer to file name string "filename.typ<SP>"
              DE = pointer to FCB buffer
     Outputs:  A = Error Code
                   0 --> No Error
                   1 --> File name > 8 characters
                   2 --> File type > 3 characters
     Registers Affected:  PSW
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-
:File Manipulation -- F$OPEN, F$CLOSE, F$MAKE, F$DELETE
     Routine Name:  F$OPEN
     Function:   Open the file specified by the FCB pointed to by  DE.   If 
file is not found, F$OPEN asks the user (on CON:) if he wishes to create it 
and  does  so if the answer is 'Y' or 'y' (F$OPEN simply  returns  with  an 
appropriate error code if answer is negative).
     Inputs:  DE = pointer to FCB
     Outputs:  A = Error Code
                   0    --> No Error
                   0FFH --> File not opened or created
     Registers Affected:  PSW
     SYSLIB Routines Called:  BDOS, CAPS, CIN, COUT, CRLF, PRINT
     Special Error Conditions:  -None-

     Routine Name:  F$CLOSE
     Function:  Close the file whose FCB is pointed to by DE.
     Inputs:  DE = pointer to FCB
     Outputs:  A = Error Code
                   0    --> No Error
                   0FFH --> Error in closing file
     Registers Affected:  PSW
     SYSLIB Routines Called:  BDOS
     Special Error Conditions:  -None-

     Routine Name:  F$MAKE
     Function:  Create (Make) the file whose FCB is pointed to by DE.
     Inputs:  DE = pointer to FCB
     Outputs:  A = Error Code
                   0FFH --> No directory space available
                   Not 0FFH --> No Error; Value is byte address in
                                TBUFF (80H-0FFH) of directory entry
                                allocated to the FCB
     Registers Affected:  PSW
     SYSLIB Routines Called:  BDOS, F$DELETE
     Special Error Conditions:  -None-

     Routine Name:  F$DELETE
     Function:   Delete  the file whose FCB is pointed to by DE.   If  file 
does not exist, nothing happens (no error message or code is given).
     Inputs:  DE = pointer to FCB
     Outputs:  -None-
     Registers Affected:  PSW
     SYSLIB Routines Called:  BDOS
     Special Error Conditions:  -None-
:File Input/Output Routines -- F$READ and F$WRITE
     Routine Name:  F$READ
     Function:  Read next block (128 bytes) from the opened file whose  FCB 
is pointed to by DE into TBUFF (buffer at 80H - 0FFH).
     Inputs:  DE = pointer to FCB
     Outputs:  A = Error Code
                   0 --> No Error
                   1 --> Read past end of file
                   2 --> Reading unwritten data in random access
     Registers Affected:  PSW
     SYSLIB Routines Called:  BDOS
     Special Error Conditions:  -None-

     Routine Name:  F$WRITE
     Function:   Write  next block (128 bytes) from TBUFF (buffer at 80H  - 
0FFH) to the opened file whose FCB is pointed to by DE.
     Inputs:  DE = pointer to FCB
     Outputs:  A = Error Code
                   0    --> No Error
                   1    --> Error in extending file
                   2    --> End of disk data
                   0FFH --> No more directory space
     Registers Affected:  PSW
     SYSLIB Routines Called:  BDOS
     Special Error Conditions:  -None-
:Input Line Editor -- INLINE
     Routine Name:  INLINE
     Function:   INLINE allows the user to input a line of text  from  CON: 
into the buffer pointed to by HL.   The user is allowed to edit the text as 
he types it, and INLINE responds to the following editor commands:

   Key Command      Function
   -----------      --------
     <BS>           Delete previous character and back up cursor
     <DEL>          Delete previous character and echo it (like CP/M)
     <CR>           Input complete -- return to calling program
     <LF>           Skip down to next physical line and insert a <CR> <LF>
                      into buffer
     <TAB>          Tabulate to next tab stop (every 8, as in CP/M)
     Ctrl-U,        Erase current line (clear buffer) and restart input
       Ctrl-X
     Ctrl-R         Retype current line

On exit,  the buffer contains the text entered followed by a <NULL> (binary 
0); the <CR> typed to end the input is NOT placed in the buffer.

     Inputs:  HL = pointer to input line buffer
     Outputs:  -None- (Input line buffer contains text typed by user)
     Registers Affected:  -None-
     SYSLIB Routines Called:  CCOUT, CIN, COUT, CRLF
     Special  Error Conditions:  <BEL> (Beep at CON:) is output if  attempt 
is made to delete character (<BS> or <DEL>) before beginning of  line.   No 
limit  or  error  checking  is done on the size of the  input  line  buffer 
(buffer  overflow  is possible,  so it is recommended that buffer  is  made 
arbitrarily large).   Hash mark (#) is printed in response to Ctrl-R, Ctrl-
U, and Ctrl-X.
:String Output Routines -- PRINT, LPRINT, PSTR, LPSTR
     Routine Names:  PRINT, LPRINT
     Function:   Print  string  pointed to by the return  address  on  CON: 
(PRINT) or LST: (LPRINT).   String is terminated by a binary 0.  Control is 
returned to byte following string.
     Inputs:  Return Address = pointer to string to be printed
     Outputs:  HL points to byte after string
               (string is printed on CON: or LST:)
     Registers Affected:  HL
     SYSLIB Routines Called:  PSTR (for PRINT); LSTR (for LPRINT)
     Special  Error Conditions:  The string MUST be terminated by a  binary 
0!!!

     Routine Names:  PSTR, LPSTR
     Function:   Print  string  pointed to by HL on  CON:  (PSTR)  or  LST: 
(LPSTR).  String is terminated by a binary 0.
     Inputs:  HL = pointer to string to be printed
     Outputs:  -None- (string is printed on CON: or LST:)
     Registers Affected:  -None-
     SYSLIB  Routines Called:  CCOUT,  COUT (for PSTR);  LCOUT,  LOUT  (for 
LPSTR)
     Special  Error Conditions:  The string MUST be terminated by a  binary 
0!!!
:Numeric Output Routines -- PHL4HC,PHL5DC,PHLDC,PA2HC,PA3DC,PADC, L's, M's
     Routine Names:  PHL4HC, LHL4HC
     Function:   Print  HL  as  four (4)  hexadecimal  characters  on  CON: 
(PHL4HC) or LST: (LHL4HC).
     Inputs:  HL = value to be printed
     Outputs:  -None- (Value is printed)
     Registers Affected:  -None-
     SYSLIB Routines Called:  PA2HC (for PHL4HC); LA2HC (for LHL4HC)
     Special Error Conditions:  -None-

     Routine Name:  MHL4HC
     Function:   Store HL as four (4) hexadecimal characters in the  4-byte 
memory buffer pointed to by DE.  On return, DE points to the byte following 
this buffer.
     Inputs:  HL = value to be converted and stored
              DE points to 4-byte buffer
     Outputs:  DE points to byte after buffer
     Registers Affected:  DE
     SYSLIB Routines Called:  MA2HC
     Special Error Conditions:  -None-

     Routine Names:  PHL5DC, LHL5DC
     Function:  Print HL as five (5) decimal characters on CON: (PHL5DC) or 
LST: (LHL5DC).
     Inputs:  HL = value to be printed
     Outputs:  -None- (Value is printed)
     Registers Affected:  -None-
     SYSLIB Routines Called:  POUT (for PHL5DC); LOUT (for LHL5DC)
     Special Error Conditions:  -None-

     Routine Name:  MHL5DC
     Function:  Store HL at five (5) decimal characters in memory in the 5-
byte buffer pointed to by DE.   On return, DE points to the byte after this 
buffer.
     Inputs:  HL = value to be converted and stored
              DE points to a 5-byte buffer
     Outputs:  DE points to the byte following the buffer
     Registers Affected:  DE
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Names:  PHLDC, LHLDC
     Function:  Print HL as up to five (5) decimal characters with  leading 
spaces (<SP>) on CON: (PHLDC) or LST: (LHLDC).
     Inputs:  HL = value to be printed
     Outputs:  -None- (Value is printed)
     Registers Affected:  -None-
     SYSLIB Routines Called:  POUT (for PHLDC); LOUT (for LHLDC)
     Special Error Conditions:  -None-

     Routine Name:  MHLDC
     Function:   Store HL as up to five (5) decimal characters with leading 
spaces in the 5-byte memory buffer pointed to by DE.
     Inputs:  HL = value to be converted and printed
              DE points to the 5-byte buffer
     Outputs:  DE points to the byte after the buffer
     Registers Affected:  DE
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Names:  PA2HC, LA2HC
     Function:   Print A as two (2) hexadecimal characters on CON:  (PA2HC) 
or LST: (LA2HC).
     Inputs:  A = value to be printed
     Outputs:  -None- (Value is printed)
     Registers Affected:  -None-
     SYSLIB  Routines Called:  EN (for both);  POUT (for PA2HC);  LOUT (for 
LA2HC)
     Special Error Conditions:  -None-

     Routine Name:  MA2HC
     Function:   Store  A as two (2) hexadecimal characters in  the  2-byte 
memory buffer pointed to by HL.  On return, HL points to byte after buffer.
     Inputs:  A = value to be converted and stored
              HL points to 2-byte buffer
     Outputs:  HL points to byte after this buffer
     Registers Affected:  HL
     SYSLIB Routines Called:  EN
     Special Error Conditions:  -None-

     Routine Names:  PA3DC, LA3DC
     Function:  Print A as three (3) decimal characters on CON: (PA3DC)  or 
LST: (LA3DC).
     Inputs:  A = value to be printed
     Outputs:  -None- (Value is printed)
     Registers Affected:  -None-
     SYSLIB Routines Called:  POUT (for PA3DC); LOUT (for LA3DC)
     Special Error Conditions:  -None-

     Routine Name:  MA3DC
     Function:   Store  A  as three (3) decimal characters  in  the  3-byte 
memory buffer pointed to by HL.  On return, HL points to the byte after the 
buffer.
     Inputs:  A = value to be converted and stored
              HL points to the 3-byte buffer
     Outputs:  HL points to the byte after the buffer
     Registers Affected:  HL
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Names:  PADC, LADC
     Function:   Print A as up to three (3) decimal characters with leading 
spaces (<SP>) on CON: (PADC) or LST: (LADC).
     Inputs:  A = value to be printed
     Outputs:  -None- (Value is printed)
     Registers Affected:  -None-
     SYSLIB Routines Called:  POUT (for PADC); LOUT (for LADC)
     Special Error Conditions:  -None-

     Routine Name:  MADC
     Function:  Store A as up to three (3) decimal characters with  leading 
spaces in the 3-byte memory buffer pointed to by HL.   On return, HL points 
to the byte after the buffer.
     Inputs:  A = value to be converted and stored
              HL points to the 3-byte memory buffer
     Outputs:  HL points to the byte after the buffer
     Registers Affected:  HL
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-
:String and Value Comparision Routines -- COMPHD,COMPB,COMPBC,SCANNER,INSTR
     Routine Name:  COMPHD
     Function:  Compare HL to DE.  On return, Zero Flag Set => HL=DE, Carry 
Flag Set => HL<DE.
     Inputs:  HL, DE -- Values to compare
     Outputs:  Zero and Carry Flags
     Registers Affected:  PSW
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Names:  COMPB, COMPBC
     Function:  Vector Compare Routines.   Compare the vector pointed to by 
HL with that pointed to by DE (Vectors are of equal length).  Vectors are B 
bytes long for COMPB and BC bytes long for COMPBC.   On exit, Zero Flag Set 
indicates  that  vectors are identical;  Carry Flag Set indicates that  the 
vector pointed to by HL is less than the vector pointed to by DE.
     Inputs:  HL, DE -- Pointers to vectors to compare
              B (for COMPB), BC (for COMPBC) -- number of bytes in vectors
     Outputs:  Zero and Carry Flags
     Registers Affected:  PSW
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Name:  SCANNER
     Function:  SCANNER scans the vector of bytes pointed to by HL for  the 
vector  of bytes pointed to by DE.   The HL-byte vector is B bytes long and 
the DE-byte vector is C bytes long.   On return, if found, HL points to the 
beginning location within the original HL vector of the located vector  and 
the  Zero  Flag is Set;  if not found,  Zero Flag is not set and HL is  not 
affected (points to the beginning of the original HL-byte vector).
     Inputs:  HL = Pointer to vector to be scanned
              DE = Pointer to vector to scan for
              B = Number of bytes in HL-vector
              C = Number of bytes in DE-vector
     Outputs:  If found, Zero Set and HL pts to located vector
               If not found, Zero Reset and HL unaffected
     Registers Affected:  PSW, HL
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  Automatic success if vector searched for is 
null.

     Routine Name:  INSTR
     Function:   INSTRING Function.   Scan the string pointed to by HL  for 
the string pointed to by DE.  A string is a vector of bytes terminated by a 
binary 0.
          On return,  if found,  Zero Flag is Set and HL points to 1st byte 
of substring within scanned string;  if not found, Zero Flag is not set and 
HL is not affected.
     Inputs:  HL = Pointer to string to be scanned
              DE = Pointer to string to scan for
     Outputs:  If found, Zero Set and HL pts to located substring
               If not found, Zero Reset and HL unaffected
     Registers Affected:  PSW, HL
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  Automatic success if string searched for is 
null.
:<CR> <LF> Output -- CRLF and LCRLF
     Routine Names:  CRLF, LCRLF
     Function:  Print <CR> and <LF> on CON: (CRLF) or LST: (LCRLF).
     Inputs:  -None-
     Outputs:  -None- (<CR> <LF> is printed)
     Registers Affected:  -None-
     SYSLIB Routines Called:  POUT (for CRLF); LOUT (for LCRLF)
     Special Error Conditions:  -None-
:Conditional Input -- CONDIN
     Routine Name:  CONDIN
     Function:  Input a character from CON: if one is available; otherwise, 
return a flag stating that a character is not available on CON:.
     Inputs:  -None-
     Outputs:  A = character typed at CON: (if available)
               Zero Flag is set (Z) if no character is available
               Zero Flag is reset (NZ) if character is available
     Registers Affected:  PSW
     SYSLIB Routines Called:  CST, CIN
     Special Error Conditions:  -None-
:General Input Routines -- CST, CIN, RIN
     Routine Name:  CST
     Function:   Input  the status on CON: in Register  A.   If  Read  Data 
Available, A=0; otherwise, A=1.
     Inputs:  -None-
     Outputs:  A = Console Status
                   0 --> Read Data Available (RDA)
                   1 --> Read Data Not Available (Not RDA)
     Registers Affected:  PSW
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Names:  CIN, RIN
     Function: Input character from CON: (CIN) or RDR: (RIN) in Register A.
     Inputs:  -None-
     Outputs:  A = Character input from CON: or RDR:
     Registers Affected:  PSW
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-
:General Output Routines -- COUT, LOUT, POUT, CCOUT, CLOUT, CPOUT
     Routine Names:  COUT, LOUT, POUT
     Function:  Output character in Register A to CON: (COUT), LST: (LOUT), 
or PUN: (POUT).
     Inputs:  A = Character to output
     Outputs:  -None- (Character is output)
     Registers Affected:  -None-
     SYSLIB Routine Called:  -None-
     Special Error Conditions:  -None-

     Routine Names:  CCOUT, CLOUT, CPOUT
     Function:  Output character in Register A to CON: (COUT), LST: (LOUT), 
or  PUN:  (POUT) with control character processing.   All  characters  with 
ASCII  codes  less than <SP> (space = 20H) in value except  <NULL>,  <BEL>, 
<BS>,  <LF>,  and  <CR>  are  output  as an uparrow  (^)  followed  by  the 
corresponding letter generated by adding 40H to the character value  (i.e., 
1 outputs as "^A",  2 as "^B", etc.).  Again, the characters less than <SP> 
in value NOT output in this manner are --

          <NULL>  <BEL>  <BS>  <LF>  <CR>

Any character of value greater than <SP> is output normally.
     Inputs:  A = Character to output
     Outputs:  -None- (Character/Code is output)
     Registers Affected:  PSW (only the Flags; Register A is NOT affected)
     SYSLIB Routines Called:  COUT (for CCOUT); LOUT (for CLOUT); POUT (for 
CPOUT)
     Special Error Conditions:  -None-
:Miscellaneous Routines -- BDOS,  CAPS,  CIO,  EN,  FILLB,  FILLBC,  MOVEB, 
MOVEBC, CATH
     Routine Name:  BDOS
     Function:   Call CP/M Entry Point at location 5 and preserve Registers 
HL and DE.
     Inputs:  -As Required by User-
     Outputs:  PSW, BC
     Registers Affected:  PSW, BC
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -Determined by Routines Called-

     Routine Name:  CAPS
     Function:   Capitalize ASCII character in Register A if it  is  lower-
case alphabetic (a-z); otherwise, return A unaffected.
     Inputs:  A = character to capitalize
     Outputs:  A = capitalized character
     Registers Affected:  PSW
     SYSLIB Routins Called:  -None-
     Special Error Conditions:  -None-

     Routine Name:  CIO
     Function:   CP/M  I/O through BIOS Jump Table.   This routine  indexes 
into the CP/M BIOS Jump Table and allows the user to address any routine in 
the  BIOS  (accessable  routines  only).   It is  called  with  Register  A 
containing  the index offset (see table below) and Registers BC  containing 
any required input arguments.  The following table summarizes the BIOS Jump 
Table entries --

Offset Function                    Offset Function
   0   Warm Start                     7   Home Disk Head
   1   Console Status; A=0FFH if      8   Select Disk; C=Disk Number (A=0,
       char ready, A=0 if not             B=1, C=2, D=3) passed
   2   Console Input; A=result        9   Set Track Number; C=Track Number
   3   Console Output; C=char passed      passed
   4   List Output; C=char passed    10   Set Sector Number; C=Sector
   5   Punch Output; C=char passed        Number passed
   6   Reader Input; A=result        11   Set DMA Address; BC=adr passed
                                     12   Read Disk; A=0 if ok, 1 if err
                                     13   Write Disk; A=0 if ok, 1 if err
Any other offset results in a Cold Start being performed.

     Inputs:  A = Offset
              BC = Data Passed to Routine
     Outputs:  A = Output or Error Indicator
     Registers Affected:  PSW
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Name:  EN
     Function:   Exchange Nybbles in Register A;  High-order four bits  are 
exchanged with Low-order four bits of Register A.
     Inputs:  A = Byte input
     Outputs:  A = Byte output
     Registers Affected:  PSW
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Names:  FILLB, FILLBC
     Function:   These routines fill an area of memory with a constant byte 
value.  FILLB can fill up to a 256-byte buffer, and FILLBC can fill up to a 
65,536-byte (within reason) buffer.
     Inputs:  HL points to the first byte of the buffer to be filled
              B (for FILLB) or BC (for FILLBC) = number of bytes in buffer
              A = byte value to fill buffer with
     Outputs:  -None- (Buffer is filled)
     Registers Affected:  -None-
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Names:  MOVEB, MOVEBC
     Function:   Move  the block of memory pointed to by HL to  the  memory 
location  pointed to by DE.   MOVEB can move up to a 256-byte  buffer,  and 
MOVEBC can move up to a 65,536-byte buffer.
     Inputs:  HL points to the first byte of the buffer to move
              DE points to the first byte of the buffer to move to
              B (for MOVEB) or BC (for MOVEBC) = number of bytes in buffer
     Outputs:  -None- (Buffer is moved)
     Registers Affected:  -None-
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  -None-

     Routine Name:  CATH
     Function:   Convert the ASCII Hexadecimal character in the A  Register 
to binary in the A Register.   If invalid character (not 0-9,  A-F), return 
<SP> (20 Hex) in A Register as error code.
     Input:  A = ASCII Hex Character (0-9, A-F)
     Output:  A = Binary value represented by char
     Registers Affected:  PSW
     SYSLIB Routines Called:  -None-
     Special Error Conditions:  If invalid hex char, <SP> (20 Hex) returned 
in A Register.

.