Home
> Commands A-M
> Commands M
MODE (Display Device Status)
Description
| Syntax
| Parameters
| Switches
| Related
| Notes
| Examples
| Errorlevels
| Availability
Displays the status of one or all of the devices installed on
your system.
Syntax
MODE
/?
MODE
[device]
[/STA[TUS]]
To display the status of all devices installed on your system:
MODE
Parameters
- device
(v4.0
Win95
NT3.1)
- Specifies the name of the device for which you want to
display the status.
Switches
- /?
(NTXP)
- Displays help.
- /STA[TUS]
(v4.0
Win95
NT3.1)
- Requests the status of any redirected parallel printers. The
MODE command, when used without this switch, displays the status
of all installed devices except redirected parallel printers. You
can abbreviate the /STATUS switch as /STA.
Related
MODE - Configure Printer.
MODE - Configure Serial Port.
MODE - Redirect Printing.
MODE - Set Device Code Pages.
MODE - Set Display Mode.
MODE - Set Typematic Rate.
Notes
none.
Examples
To display the status of the monitor and keyboard, type:
MODE con /STATUS
Errorlevels
none.
Availability
- External Resident
-
- DOS
-
v4.0
v4.01
v4.01A
v5.0
v5.0A
v5.00.02
v5.001A
v5.01
v5.02
v6.0
v6.10
v6.2
v6.21
v6.22
v6.23
v7.00
v7.0R1
v7.10
v8.00
- Windows
-
Win95
Win98
WinME
- Windows NT
-
NT3.1
NT3.5
NT3.51
NT4
NT2000
NTXP
NT2003
Last Updated: 2006/12/01
Direct corrections or suggestions to:
Rick Lively