(C) PLOS One
This story was originally published by PLOS One and is unaltered.
 . . . . . . . . . .



An on-site adaptable test for rapid and sensitive detection of Potato mop-top virus, a soil-borne virus of potato (Solanum tuberosum) [1]

['Ying Zhai', 'Department Of Plant Pathology', 'Washington State University', 'Pullman', 'Wa', 'United States Of America', 'Bryant Davenport', 'Agdia', 'Inc.', 'Elkhart']

Date: 2022-08 

Abstract Potato mop-top virus (PMTV) is considered an emerging threat to potato production in the United States. PMTV is transmitted by a soil-borne protist, Spongospora subterranean. Rapid, accurate, and sensitive detection of PMTV in leaves and tubers is an essential component in PMTV management program. A rapid test that can be adapted to in-field, on-site testing with minimal sample manipulation could help in ensuring the sanitary status of the produce in situations such as certification programs and shipping point inspections. Toward that goal, a rapid and highly sensitive recombinase polymerase amplification (RPA)-based test was developed for PMTV detection in potato tubers. The test combines the convenience of RPA assay with a simple sample extraction procedure, making it amenable to rapid on-site diagnosis of PMTV. Furthermore, the assay was duplexed with a plant internal control to monitor sample extraction and RPA reaction performance. The method described could detect as little as 10 fg of PMTV RNA transcript in various potato tissues, the diagnostic limit of detection (LOQ) similar to that of traditional molecular methods.

Citation: Zhai Y, Davenport B, Schuetz K, Pappu HR (2022) An on-site adaptable test for rapid and sensitive detection of Potato mop-top virus, a soil-borne virus of potato (Solanum tuberosum). PLoS ONE 17(8): e0270918. https://doi.org/10.1371/journal.pone.0270918 Editor: Emran Ali, University of Georgia, UNITED STATES Received: January 6, 2022; Accepted: June 17, 2022; Published: August 1, 2022 Copyright: © 2022 Zhai et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Data Availability: All relevant data are within the paper and its Supporting Information files. Funding: This research was supported by the USDA National Institute of Food and Agriculture, Hatch project # 1016563 (to HRP). Supported in part by a grant from the USDA/NSF Plant-Biotic Interactions Program. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. Competing interests: The authors have declared that no competing interests exist.

Introduction Potato mop-top virus (PMTV), a member of the genus Pomovirus and family Virgaviridae, is an economically important virus of potato in many potato-producing regions in the world. The virus primarily infects plants in Solanaceae and Chenopodiaceae families [1]. The soil-borne protist, Spongospora subterranean, causal agent of potato powdery scab, is a vector of PMTV [2]. PMTV infection mainly manifests in tubers as internal necrosis and results in reduced yield and quality [3]. Since its first diagnosis in UK in 1966 [4], PMTV has been identified in most potato cultivation areas across Asia, Europe, North and South America [5–8]. Phylogenetic evidence supports the hypothesis that PMTV originated from the Andean region of South America [7, 8]. Managing PMTV continues to be a challenge [9]. There are very few resistant cultivars available [3]. The extremely long viability (up to 18 years) of PMTV in its vector’s dormant spores further increases the difficulty for disease management via crop rotation [10]. Thus, the best practice for PMTV control is early-stage diagnosis to prevent its spread. PMTV genome comprises of three single-stranded (ss) (+) RNAs [11–13]. The three RNA fragments share highly conserved 5’-untranslated regions and an identical tRNA-like structure in their 3’-end [14]. The genomic RNAs encode multiple proteins that are essential for virus replication and propagation. The PMTV RNA-dependent RNA polymerase (RdRp), which is responsible for viral genome replication, is encoded by the longest 6043-nt Rep RNA [13]. The coat protein (CP) and another larger structural protein Coat Protein Read Through (CPRT) are both translated from the intermediate-length (3134 nt) CP RNA, with CPRT being translated via read through of a stop codon [12]. The triple gene block (TGB) RNA is 2964 nucleotides (nt) in length, which encodes a cysteine-rich RNA-silencing suppressor and three movement proteins (TGB1–3) with overlapping open reading frames (ORFs). Both CPRT [15] and the three TGBs [16, 17] facilitate the movement of PMTV particles across plant cells, with the physical interaction between CPRT and TGB1 being critical for this systemic movement process [18]. One of the most effective means to reduce PMTV infection or introduction into a virus-free field is by ensuring that the seed tubers are free of PMTV infection. Several molecular detection methods have been reported for PMTV. One of the earlier reports using reverse transcription quantitative PCR (RT-qPCR) approach [19] has now been digitalized for direct detection of PMTV in soil samples [20]. Many of the protocols require laboratory-based sample processing followed by RT-PCR or RT-qPCR methods that require 4 to 8 hours to obtain the result. In situations where the virus status of a particular field of potatoes or shipments is urgently needed, a rapid test that can be carried out in the field or on-site such as shipping point inspections would greatly aid in seed certification programs, trade, and movement of produce across state or country lines. Recombinase polymerase amplification (RPA), first described in 2006 [21], is gaining wide adaptation due to its convenience, faster processing, high specificity, and sensitivity [22]. In this study, we developed a rapid, RPA-based on-site test for PMTV detection in potato leaves and tubers. The method combines the convenience of the RPA assay with a simple sample extraction procedure, and provides diagnostic limit of detection (LOQ) similar to that of traditional molecular methods.

Materials and methods The protocol described in this peer-reviewed article is published on protocols.io (http://dx.doi.org/10.17504/protocols.io.14egn7n7qv5d/v1), and is included for printing as S1 File with this article. Plant materials Potato tubers with suggestive of PMTV-induced symptoms were collected from experimental plots in Idaho and Washington, USA, during 2019 and 2020 growth seasons. Design of RPA primers and probes Sequences of PMTV RNA 1, 2, and 3 segments were obtained from GenBank (https://www.ncbi.nlm.nih.gov/genbank/). Their conserved homologous regions were used to design primers and probes following RPA design guidelines outlined in the help book of Agdia AmplifyRPTM XRT Discovery Kit (https://orders.agdia.com/pathogen-tests/amplifyrp/amplifyrp-xrt-discovery). Oligos were screened in silico for efficacy analyses of melting temperature, potential secondary structure, heterodimer activity between oligos, and potential cross reactivity to other pathogens. Likewise, highly conserved plant gene sequences were aligned and used for RPA oligo design to serve as an endogenous control. Primers and probes were synthesized by Integrated DNA Technologies (IDT, Coralville, IA, USA). PMTV and internal control probes were labeled with a 6-carboxyfluorescein (FAM) fluorescent dye and ZENTM internal quencher, and a carboxy-X-rhodamine (ROX) fluorescent dye and TAOTM internal quencher, respectively (Table 1). PPT PowerPoint slide

PNG larger image

TIFF original image Download: Table 1. PCR primers used for comparison analysis in the RPA assay for the detection of potato mop-top virus. https://doi.org/10.1371/journal.pone.0270918.t001 Sample preparation Potato leaves, petioles, tubers and tissue culture plantlets were used for extraction. Foliar tissues were extracted in a mesh bag (Agdia, ACC 00930) using general extraction buffer (Agdia, ACC 00955) with a weight to volume ratio of 1:10 (1gr:10mL). Four cores per tuber were taken for test using a biopsy tool (Harris Uni-Core 3mm, Sigma WHAWB100039). Cores from up to ten tubers were combined into a single sample and extracted in a mesh bag using general extraction buffer with a 1:2 weight to buffer ratio. Samples were homogenized with a blunt object and left for five minutes at room temperature. Extracted sap was used for direct PMTV detection with RPA reaction pellets (Agdia Inc., Elkhart, IN, USA, Catalog number XCS 99200). RNA extraction RNA extraction was performed as described previously [23]. Two grams of fresh tissue was ground in liquid nitrogen using mortar and pestle. The fine powder was then transferred to a 15 mL Falcon tube and the following were sequentially: 1.0 mL of 5 M NaCl, 0.5 mL of 10% (w/v) SDS, 1.65 mL of 1.95% (w/v) Na 2 SO 3 , 1.75 mL of 0.2 M borate-Tris buffer (pH 8.0 with 10 mM EDTA), and 0.1 mL of β-mercaptoethanol. After mixing by a vortexer, the mixture was incubated at 65°C for 5 min. The supernatant, obtained by centrifugation at 1800 g for 5 min at 23°C, was mixed with an equal volume of Tris-saturated phenol (pH 7.9). After centrifugation, the upper phase was extracted with an equal volume of chloroform-isoamyl alcohol (24:1) and centrifuged again to facilitate phase separation. The extract was mixed with isopropanol at the ratio of 1: 0.9. RNA was pelleted by centrifuging at 20,000 g (15 min, 4°C) after incubation at 4°C for 1 h. After washing with 1 mL 70% ethanol for four times, the pellet was dissolved in RNase-free water. RPA amplification and detection RNA (one or two microliters) was added directly to the reaction tube containing reaction primers, probes and Discovery XRT pellets rehydrated with 25 μL of kit reagents (Agdia, XCS 99200), ensuring that the pellets were completely dissolved. Rehydrated reactions were then placed into a pre-warmed AmpliFireTM isothermal fluorometer (Agdia, AFR 60400), set at 42°C and monitored for 20 min on the FAM and ROX/CalRed channels. After every 4 min of incubation, the reaction tubes were removed from the AmpliFire, mixed by tapping with fingers, briefly centrifuged, and were placed back in the AmpliFire (S1 File). RT-qPCR Two one-step RT-qPCR assays (A&B) were carried out to compare the results with those from the RPA. The first assay [24] was developed to target RNA 2 of the type isolate (GenBank no. NC_003725) and a portable real-time PCR machine was used. In our assay, the reaction was run on the stationary BioRad CFX96 as a one-step 25μL RT-qPCR reaction utilizing that consisted of 1x TaqMan GTXpress reaction master mix (Thermo Fisher, 4401892), 0.2 μM PMTV-D-F and R primers, 0.15 μM PMTV-D-P labeled with FAM and BHQ, 50 U M-MLV reverse transcriptase (Promega, M1705), and 2 μL of purified RNA (1pg/uL, 100fg/ μL, 100fg/ μL and 100fg/ μL). The second RT-qPCR assay [19] was developed to target RNA 3 of the type isolate (GenBank no. NC_003724). This set was run as an identical one-step 25 μL RT-qPCR reaction except using 0.3 μM PMTV-1948F and PMTV-2017R primers. Reactions for the RNA 2 target were run at 50°C for 30 min, 95°C for 10 min, 50 cycles at 95° C for 15 sec and 60°C for 1 min. Reactions for the RNA3 target used an initial RT at 48°C for 15 minutes and only 40 cycles. Data were analyzed using the BioRad CFX Manager TM to set the threshold of relevant positive and negative controls. RPA results were compared with those obtained from conventional two-step RT-PCR. The RT-PCR assay for PMTV detection [25] was developed to produce a 416-bp amplicon from PMTV RNA 3 encoding CPRT. Reactions were run according to previously described specifications. In brief, reverse transcription was carried out using 0.5 μM PMTV2/3R, 1x PCR reaction buffer, 5 mM MgCl 2 , 1 mM dNTPs, 20 U RNase inhibitor (Promega, N2611), 50 U M-MLV and 2 μL of purified RNA (1pg/μL, 100fg/ μL, 100fg/ μL and 100fg/ μL) in a 20 μL volume. RNA was denatured for 5 min at 75°C with the reverse primer and water prior to running RT. The RT reaction was performed at 42°C for 30 min followed by 99°C for 5 min. The subsequent PCR reaction was set up as following: 1x PCR buffer, 1.5 mM MgCl 2 , 0.1 mM dNTPs, 0.4 μM PMTV 2/3 F and R, 1.25 U HotStar Taq polymerase (Qiagen, 203205), and 2 μL of cDNA in a 25μL volume. The cycling profile was 95°C for 15 min, followed by 30 cycles of 94°C for 15 sec, 58°C for 1 min and 72°C for 30 sec, and a final extension at 72°C for 7 min. DNA bands were separated on a 1.5% agarose gel and stained with ethidium bromide. Sensitivity analysis A chimeric DNA fragment was designed based on the TGB1 [24] and coat protein [19]-encoding genes from the PMTV type isolate sequence (GenBank no. NC_003725 & NC_003724) by combining the amplicon sequences for RT-RPA, RT-qPCR, and RT-PCR with a T7 RNA polymerase tag. The chimeric DNA was synthesized by Integrated DNA Technologies (IDT, Coralville, IA, USA). RNA transcripts were produced in vitro via T7 RNA transcription following manufacturer’s recommendations for non-labeled RNA synthesis (Promega, P2075). RNA concentration and purity were measured with a Thermo Fisher NanoDrop-2000 Spectrophotometer, and samples were stored at -80°C after adding RNasin Plus RNase inhibitor (Promega, N2615).

Conclusion Results presented here described and demonstrated the applicability of RPA for potential on-site PMTV detection. The test includes an internal control to assess reaction performance in the presence of difficult-to-handle tissues and/or cultivar variation. The assay utilizes a crude general extraction buffer and maceration to process the sample. Reactions were performed at an isothermal temperature for 20 min to increase sample throughput. The assay is capable of detecting all PMTV isolates tested, as confirmed by PCR. In silico data support successful detection of all currently described PMTV-genetic variants (S1 Table) with no cross reaction to closely related viruses or other potato-infecting pathogens. The LOQ of our RPA assay is comparable to those of existing diagnostic methods. The cost of traditional RT-PCR diagnosis, including RNA extraction, reverse transcription, PCR primers and reagents, is expected to be more than $20 per sample, in addition to the time devoted to processing the samples and data interpretation. In contrast, this assay only needs crude sample extraction and the PMTV kit ($13.65 per reaction) run on either a qPCR machine or a fluorometer for 20 minutes. In conclusion, the RPA protocol described here presents a low-cost, sensitive, rapid and reliable tool for onsite monitoring of PMTV infection status in potato production chain.

Supporting information S1 Fig. RPA primer and probe combinations from Table 2 screened against naturally infected PMTV infected tubers. All primers were screened at 0.4 μM and probes at 0.08 μM. Results for each target region are displayed in A) Coat protein read through protein, CPRT; B) Triple gene block protein 1, TGB1; C) RNA 1 probe 1 combination; D) RNA 1 probe 2 combinations. Combinations targeting the TGB1 gene had the strongest amplification curves and were used for further testing and refinement. https://doi.org/10.1371/journal.pone.0270918.s001 (DOCX) S1 Table. Assessment of the PMTV RPA oligo combination TGB1-P1F1R3 to sequences in the NCBI GenBank database to determine in silico feasibility of detection. The length of each oligo is present below the identifier with the corresponding number of matching nucleotides described for each PMTV isolate under each oligonucleotide. https://doi.org/10.1371/journal.pone.0270918.s002 (DOCX) S1 File. Rapid RNA amplification test for PMTV. Also available on protocols.io. http://dx.doi.org/10.17504/protocols.io.14egn7n7qv5d/v1. https://doi.org/10.1371/journal.pone.0270918.s003 (PDF)

[END]
---
[1] Url: https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0270918

Published and (C) by PLOS One
Content appears here under this condition or license: Creative Commons - Attribution BY 4.0.

via Magical.Fish Gopher News Feeds:
gopher://magical.fish/1/feeds/news/plosone/