(C) PLOS One
This story was originally published by PLOS One and is unaltered.
 . . . . . . . . . .



Berbamine hydrochloride potently inhibits SARS-CoV-2 infection by blocking S protein-mediated membrane fusion [1]

['Zhe-Rui Zhang', 'Key Laboratory Of Special Pathogens', 'Biosafety', 'Wuhan Institute Of Virology', 'Center For Biosafety Mega-Science', 'Chinese Academy Of Sciences', 'Wuhan', 'University Of Chinese Academy Of Sciences', 'Beijing', 'Ya-Nan Zhang']

Date: 2022-08 

Abstract COVID-19 caused by SARS-CoV-2 has posed a significant threat to global public health since its outbreak in late 2019. Although there are a few drugs approved for clinical treatment to combat SARS-CoV-2 infection currently, the severity of the ongoing global pandemic still urges the efforts to discover new antiviral compounds. As the viral spike (S) protein plays a key role in mediating virus entry, it becomes a potential target for the design of antiviral drugs against COVID-19. Here, we tested the antiviral activity of berbamine hydrochloride, a bis-benzylisoquinoline alkaloid, against SARS-CoV-2 infection. We found that berbamine hydrochloride could efficiently inhibit SARS-CoV-2 infection in different cell lines. Further experiments showed berbamine hydrochloride inhibits SARS-CoV-2 infection by targeting the viral entry into host cells. Moreover, berbamine hydrochloride and other bis-benzylisoquinoline alkaloids could potently inhibit S-mediated cell-cell fusion. Furthermore, molecular docking results implied that the berbamine hydrochloride could bind to the post fusion core of SARS-CoV-2 S2 subunit. Therefore, berbamine hydrochloride may represent a potential efficient antiviral agent against SARS-CoV-2 infection.

Author summary The recent COVID-19 pandemic has caused a global health threat. Development of antiviral agents are urgently required to control the pandemic. In this study, we evaluated the antiviral activity of berbamine hydrochloride, a bis-benzylisoquinoline alkaloid that is isolated from traditional Chinese medicinal Berberis amurensis. We demonstrated that berbamine hydrochloride potently inhibits SARS-CoV-2 infection by blocking the entry of the virus into the host cell. Moreover, berbamine hydrochloride and other bis-benzylisoquinoline alkaloids also block SARS-CoV-2 S-mediated membrane fusion. Furthermore, we analyzed the interaction of berbamine hydrochloride and viral proteins by molecular docking analysis. We found that berbamine hydrochloride could directly bind to the post fusion core of SARS-CoV-2 S2 subunit, which mediates the fusion with the host membranes. Our results provide a new lead compound for antiviral agents against SARS-CoV-2 infection.

Citation: Zhang Z-R, Zhang Y-N, Zhang H-Q, Zhang Q-Y, Li N, Li Q, et al. (2022) Berbamine hydrochloride potently inhibits SARS-CoV-2 infection by blocking S protein-mediated membrane fusion. PLoS Negl Trop Dis 16(4): e0010363. https://doi.org/10.1371/journal.pntd.0010363 Editor: Mohamed Gomaa Kamel, Minia University, EGYPT Received: August 7, 2021; Accepted: March 28, 2022; Published: April 25, 2022 Copyright: © 2022 Zhang et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Data Availability: All relevant data are within the manuscript and its Supporting Information files. Funding: This work was supported by the Hubei Science and Technology Major Project (grant Nos. 2021ACB0003) awarded to HQY. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. Competing interests: The authors have declared that no competing interests exist

Introduction Coronavirus disease 2019 (COVID-19) is a respiratory illness caused by an emerging novel coronavirus SARS-CoV-2. Since the outbreak at the end of 2019, the COVID-19 pneumonia pandemic spreads rapidly around the world and causes a serious global social crisis [1]. Most recently, there are a few drugs approved for clinical treatment to combat SARS-CoV-2 infection. Molnupiravir, a potent RNA-dependent RNA polymerase inhibitor, is the first approved oral antiviral agent for treating COVID-19. Ritonavir in combination with PF-07321332 was approved for emergency use by the US Food and Drug Administration on 22 December 2021 for the treatment of mild-to-moderate COVID-19 disease [2]. However, the severity of the ongoing global pandemic still urges the efforts to discover new antiviral compounds. SARS-CoV-2 belongs to the genus Betacoronavirus and is an enveloped, single-stranded positive-sense RNA virus with a genome size of ∼30 kb [3]. The SARS-CoV-2 genome contains multiple functional open reading frames (ORFs) that code replicase (ORF1a/ORF1b), spike (S), envelope (E), membrane (M) and nucleocapsid (N), respectively [4]. The S protein, residing on the virion surface as trimers, plays a key role in virus entry [5]. It consists of two subunits: S1 and S2. The S1 subunit contains the receptor-binding domain (RBD), which is involved in host cell receptor binding, and the S2 subunit is responsible for the fusion of viral and cellular membranes [5–9]. In infected cells, the encoded S protein is trafficked to the cell surface and induces cell-cell membrane fusion and the formation of multinucleated cells (syncytia), which is believed to be important for both pathogenicity and transmission of the virus [10]. The presence of infected multinucleated syncytial pneumocytes has been demonstrated to be associated with severe cases of COVID-19 [10]. Therefore, to explore membrane fusion inhibitors is very useful to block virus pathogenicity and transmission. Natural compounds, especially the ones derived from plants, has played a crucial role in drug discovery due to their potential multiple targets, bioactivities and limited toxicity [11]. Over the past three decades, more than 50% of approved drugs and drug candidates are natural compounds or derivatives thereof [12,13]. As such, the natural compounds provide a rich basis for the discovery and development of anti-SARS-CoV-2 drugs. Berbamine hydrochloride is a bis-benzylisoquinoline alkaloid that is isolated from traditional Chinese herbal medicine Berberis amurensis. At present, some studies have reported the inhibitory effects of berbamine hydrochloride on SARS-CoV-2 in vitro. By in silico analysis, berbamine hydrochloride was demonstrated to be able to bind to ACE2, GRP78 and TMPRSS2 of the host cells [14] and have high affinity with the main protease (Mpro) of SARS-CoV-2 [15], respectively. However, these findings have not been further verified in experiments. Sangeun Jeon et al carried out a high content chemical screening using an FDA-approved drug library and discovered that berbamine hydrochloride showed potential antiviral activities against SARS-CoV-2 [16]. Lihong Huang et al showed that berbamine inhibits SARS-CoV-2 infection by compromising TRPMLs-mediated endolysosomal trafficking of ACE2 [17]. Here, we found a new antiviral mechanism for berbamine hydrochloride against SARS-CoV-2 by blocking virus entry through inhibiting the spike protein (S) -mediated cell-cell fusion. Moreover, other bis-benzylisoquinoline alkaloids (including tetrandrine, liensinine, isoliensinine, fangchinoline, and cepharanthine) also block S-mediated membrane fusion. Molecular docking analysis implied that the berbamine hydrochloride could bind to the post fusion core of SARS-CoV-2 S2 subunit. Consequently, we demonstrated that berbamine hydrochloride may be useful as lead compound for antiviral agents against SARS-CoV-2 infection.

Materials and methods Cells, viruses, antibodies and reagents Vero-E6 cells (ATCC CRL-1686) and Caco2 cells (ATCC HTB-37) were kindly provided by Prof. Zheng-Li, Shi (Wuhan institute of Virology, CAS). BHK-21 cells were kindly provided by Prof. Han-Zhong, Wang (Wuhan institute of Virology, CAS). For all cell culture procedures, the cells were cultivated in Dulbecco’s modified Eagle Medium (DMEM; Invitrogen, Darmstadt, Germany) supplemented with 10% fetal bovine serum (FBS; Gibco), and penicillin (100 U/ml)-streptomycin (100 μg/ml) at 37°C with 5% CO 2 . SARS-CoV-2 (WIV-04) (3) was propagated in Vero E6 cells and stored in aliquots at −80°C for experiments. All the experiments using the live SARS-CoV-2 virus were performed in a BSL-3 laboratory at Wuhan Institute of Virology according to standard BSL-3 guidelines. The antibody against the NP protein of RP3-CoVwas kindly provided by Prof. Zheng-Li, Shi (Wuhan institute of Virology, CAS), which is cross-reactive with the NP protein of SARS-CoV-2. FITC-conjugated goat anti-rabbit IgG was purchased from Protein Tech Group. Berbamine hydrochloride, liensinine, isoliensinine, tetrandrine, fangchinoline and cepharanthine were purchased from Weikeqi Biotech (Sichuan, China). Plaque assay The titer of SARS-CoV-2 virus stock was determined by plaque assay. Briefly, virus supernatants were 10-fold serially diluted, and were added into confluent Vero E6 cells seeded in 24-well plate (plated 1 day in advance). Infected cells were incubated at 37°C for 1 h before medium containing 1% methylcellulose was overlaid. After incubation for 4 days at 37°C with 5% CO 2 , the cells were fixed with 3.7% formaldehyde and stained with 1% crystal violet. The viral titer was calculated as plaque forming units (PFU)/mL. Real-time RT-PCR Viral RNAs were extracted from the supernatant of the infected cells using QIAamp viral RNA mini kit (52906, Qiagen) following the manufacturer’s protocol. Real-time RT-PCR was performed using Universal Probe One-Step RT-PCR Kit (catalog no. E3006; NEB). For genome RNA quantification, the primer pair (RBD-qF1: 5’- CAATGGTTTAACAGGCACAGG-3’, RBD-qR1: 5’- CTCAAGTGTCTGTGGATCACG-3’ and Probe: ACAGCATCAGTAGTGTCAGCAATGTCTC) were used. The amplification condition for real-time RT-PCR assay consists of RT step at 42°C for 15min, RT inactivation at 95°C for 60s, followed by 40 cycles of PCR at 95°C for 10s (denaturation) and 60°C for 45s (annealing and extension). Cytotoxicity assays The cytotoxicity of the berbamine hydrochloride on Vero E6 and Caco2 cells were determined by CCK8 assays according to the manufacturer’s protocols, which performed in BSL-2 laboratory. Briefly, Vero-E6 cells and Caco2 cells were seeded in 96-well plates (1×104 cells per well). After one day cultivation, cells were treated with concentration gradient of berbamine hydrochloride for 36 h, and for each drug concentration, two wells were performed in parallel. Subsequently, the cells were incubated with 10 μL CCK8 reagent (1:100; cell counting kit-8, Bimake) for 1 h at 37°C. The absorbance at 450 nm was measured by a multimode Microplate Reader (Varioskan Flash, Thermo Fisher). Cell activity was expressed as the percentage of the absorption value of the treated cells to the untreated cells. For each concentration, mean values of the cell viability were calculated. The half-maximal cytotoxicity concentration (CC 50 ) was calculated by nonlinear regression using GraphPad Prism 8.0. In vitro antiviral assays To evaluate the antiviral efficacy of the drug, we performed antiviral assay. Briefly, Vero E6 and Caco2 cells were infected with the SARS-CoV-2 at an MOI of 0.01. The infected cells were treated with different concentrations of berbamine hydrochloride, tetrandrine, fangchinoline and cepharanthine, respectively. At 36 h p.i., the amounts of infectious viruses in culture fluids were quantified by real time RT-PCR assay. The antiviral activity of the compounds was expressed as 50% effective concentration (EC 50 ) and was calculated with the GraphPad Prism software 8.0 using the nonlinear regression analysis. Time of addition assay The time of addition experiment was used to test the drug inhibition stage of the SARS-CoV-2 life cycle. Vero E6 cells were treated with berbamine hydrochloride or DMSO at the following time points: full-time-infection (−1 to 12 h), during-time-infection (0–2 h), and post-time-infection (2–12 h). For “Full-time-infection” treatment, Vero E6 cells were pre-treated with the drugs for 1 h and the virus was applied for 2 h to allow infection. Then, the virus-drug mixture was removed. Cells were washed with PBS, and further cultured with drug-containing medium until the end of the experiment. For “Entry” treatment, the drugs were added to the cells for 1 h before virus infection, and maintained during the 2 h viral attachment process. Then, the virus-drug mixture was replaced with fresh culture medium without drugs till the end of the experiment. For “Post-entry” experiment, virus was added to the cells to allow infection for 2 h, and then virus-containing supernatant was replaced with drug-containing medium until the end of the experiment. The DMSO-treatment group of the final selected studies was consistent with that of the “Full-time” group. For all the experimental groups, cells were infected with virus at an MOI of 0.05, and at 12 h p.i., the amounts of infectious viruses in culture fluids were quantified by real time RT-PCR assay. Inhibition rate of berbamine hydrochloride was calculated as the percentage of viral RNA copies relative to DMSO control. Transient replicon assay A Renilla luciferase (Rluc) replicon of SARS-CoV-2, which was constructed in our laboratory and could be operated in BSL-2 lab to represent virus transcription and replication [18], was used to determine the inhibitory effect of berbamine hydrochloride on SARS-CoV-2 RNA replication. BHK-21 cells were electroporated with 10 μg of replicon RNA using a GenePulser Xcell system (Bio-Rad, Hercules, CA) according to an established protocol. The transfected cells were seeded in 12-well plate, simultaneously treated with 10 μM berbamine hydrochloride or DMSO. At different time points post transfection (p.t.), the cells were washed once with PBS and lysed with 200 μL lysis buffer (Promega). 20 μL of cell lysates were used to determine for luciferase signals after adding 50 μL substrate. The antiviral efficacy of berbamine hydrochloride against SARS-CoV-2 RNA replication was evaluated by the reduction of luciferase signals. DMSO is the solvent for the compounds and is used as a control. SARS-CoV-2 Spike-mediated pseudovirus entry assay Vero-E6 cells were seeded in a 12- well plate for 24 h, and then were treated with 10 μM berbamine hydrochloride. After incubation for 2 h, the cells were infected with VSV-delG-Rluc-SARS-CoV-2-S pseudovirus. At 24 h post-infection, cells were lysed and the intracellular luciferase activities were measured according to the manufacturer’s protocols. Experiments were performed at least twice in BSL-2 laboratory. Virus attachment assay Vero E6 cells was infected with SARS-CoV-2 (MOI = 0.05) and incubated at 4°C for 1 h to allow virus attachment in the presence of berbamine hydrochloride (10 μM) or DMSO control. After synchronized adsorption for 1 h, the unbound SARS-CoV-2 virions were removed by PBS washing, and the relative levels of bound SARS-CoV-2 virions were measured by qRT-PCR assay. Syncytium formation inhibition assay BHK-21 cells were transfected with 2 μg plasmid pCAGGS-SARS-CoV-2-S encoding the SARS-CoV-2 S protein and cultured in DMEM containing 10% FBS at 37°C for 24 h. Vero E6 cells (5×104 cells per well) were incubated in 12-well plates at 37°C for 24 h, followed by the addition of 5×104 BHK-21/SARS-CoV-2/S cells, in the absence or presence of 10 μM berbamine hydrochloride, liensinine, isoliensinine, tetrandrine, fangchinoline and cepharanthine. After co-culture at 37°C for 12 h, the fused or unfused Vero E6 cells were counted under an inverted fluorescence microscope. Immunofluorescence analysis Vero E6 cells were fixed with cold 5% acetone in methanol for 10 min at room temperature. Cells were then incubated with primary antibodies (rabbit anti-SARS-CoV-2 NP protein antibody) overnight at 4°C. After washing three times with PBS, the cells were incubated with FITC-conjugated goat anti-rabbit polyclonal secondary antibody for 40 min at room temperature. After washing three times with PBS, the cells were incubated with 4, 6-diamidino-2-phenylindole (DAPI) for nuclear counterstaining for 5 min at room temperature. Images were captured under a fluorescent microscope (Nikon Eclipse TE2000). Molecular docking In order to further verify the potential drug targets, ligand based molecular docking between berbamine hydrochloride and the post fusion core of SARS-CoV-2 S2 subunit were performed using AutoDock Vina. The 3D structure of berbamine hydrochloride was obtained from ZINC (ID: ZINC38139356). The 3D structure of the post fusion core of SARS-CoV-2 S2 subunit was obtained from PDB (ID: 6LXT) databases. The resulting docking poses and affinity scores (in kcal/mol) were given by AutoDock Vina. The figure was drawn using PyMOL Molecular Graphics System. Statistical analyses Statistical analyses were performed using GraphPad Prism 8 software. An unpaired two-tailed student’s t-test was used to analyze the statistical significance of two groups.

Discussion Since its outbreak at the end of 2019, the COVID-19 has become the most severe threat to global health. Although some antiviral agents approved for clinical treatment to combat SARS-CoV-2 infection currently, it is still urgent to identify efficient antiviral inhibitors to control the current SARS-CoV-2 pandemic. Natural product-based medicines are a class of low toxicity and highly reactive compounds [21,22]. The World Health Organization encourages developing natural product-based medicines against human diseases [23]. Thus, it is worth searching for natural product-based medicines for the treatment of COVID-19. Berbamine hydrochloride, which is a natural bis-benzylisoquinoline alkaloid found in a variety of herbs, has been widely used in clinical treatment of leukopenia in China for many years and the usual dose in adults is 112 mg administered orally three times per day [24]. Besides, clinical studies in humans have substantiated that berbamine hydrochloride has multiple benefits to health including potential diabetes treatment, antihypertensive, protection against cognitive decline, anti-inflammatory and anti-cancer effects, with outstanding safety profile, low toxicity, and fewer minor side effects after oral administration [25]. Therefore, repurposing of berbamine hydrochloride to inhibit SARS-CoV-2 represents a great opportunity to be quickly applied to clinical antiviral therapy against COVID-19. In this study, we found that berbamine hydrochloride efficiently inhibited SARS-CoV-2 infection by interfering with the entry stage but not the genome replication of the viral life cycle. Moreover, syncytium formation inhibition assay suggested that the berbamine hydrochloride specifically inhibits syncytium formation by blocking S-mediated membrane fusion. In addition, some other bis-benzylisoquinoline alkaloids which showed antiviral activity against SARS-CoV-2 also efficiently inhibited S-mediated syncytium formation. These results demonstrate that the S mediated membrane fusion is an important target for the antiviral activities of these bis-benzylisoquinoline alkaloids. Furthermore, molecular docking analysis implied that the berbamine hydrochloride could bind to the post fusion core of SARS-CoV-2 S2 subunit with the residue S943. A recent study has shown that the spike-S943 could enhance the interaction between HR1 and HR2 to stabilize the structure of S2 subunit and promote membrane fusion [20]. Therefore, there is a possibility that, by binding with the significant S943 site within S2 subunit, berbamine hydrochloride blocks the interaction between the HR1 and HR2 domains, leading to the inhibitory effect on membrane fusion. In addition, berbamine hydrochloride has been reported to have various regulatory functions on cells. Berbamine hydrochloride is a trypsin-like serine protease inhibitor [26]. Previous studies have shown that the cleavage of S protein by host proteases is a prerequisite for virus-cell membrane fusion [27]. The transmembrane protease serine protease-2, which plays important role in S protein cleavage and virus entry, belongs to trypsin-like protease. Therefore, there is a possibility that berbamine hydrochloride may have inhibitory effect on the cleavage of S proteins, leading to the entry defect of the virus. In addition, berbamine hydrochloride had been reported as calcium channel blocker [28]. There are several evidences in the literature showing that SARS-CoV-2 infection induces calcium release of the infected cells [29], and the compound nicosamide, which inhibits the calcium-activated ion channel TMEM16F, could efficiently block SARS-CoV-2 S-induced syncytia and virus infection [30]. Thus, as a calcium channel inhibitor, berbamine hydrochloride may have a similar antiviral mechanism against SARS-CoV-2 by blunting the calcium oscillations caused by virus infection. We will verify these speculations in future work to further explain the antiviral mechanism of berbamine hydrochloride against SARS-CoV-2. Berbamine hydrochloride currently is being used clinically as anti-inflammatory agent. Therefore, berbamine hydrochloride might have a potential effect on the inhibition of cytokine storm in the lungs of patients induced by SARS-CoV-2. However, due to resource limitations, we were unable to test the antiviral activity of berbamine hydrochloride against SARS-CoV-2 infection in vivo in this study. The protection effects of berbamine hydrochloride on SARS-CoV-2 would be further detected in different animal models in our future work. In summary, we explored the antiviral activity of berbamine hydrochloride against SARS-CoV-2 infection in vitro and demonstrated that the spike-mediated membrane fusion is one of the targets for its antiviral activity. Taken together, our study suggests that berbamine hydrochloride may be a potential antiviral agent for the treatment of COVID-19.

Acknowledgments The experiments related to SARS-CoV-2 were performed at National Biosafety Laboratory, Wuhan, Chinese Academy of Sciences. We are particularly grateful to Tao Du, Jin Xiong and Lun Wang from Zhengdian Biosafety Level 3 Laboratory and the running team of the laboratory for their work.

[END]
---
[1] Url: https://journals.plos.org/plosntds/article?id=10.1371/journal.pntd.0010363

Published and (C) by PLOS One
Content appears here under this condition or license: Creative Commons - Attribution BY 4.0.

via Magical.Fish Gopher News Feeds:
gopher://magical.fish/1/feeds/news/plosone/